User's Manual

PRINTER AND PAPER SPECIFICATIONS
User's Manual B-3
Print method Impact dot matrix with a 0.21 mm or 0.25mm,
24-wire head
Print direction Bidirectional logic-seeking or unidirectional
seeking
Character cell
Horizontal  vertical
Letter (10 cpi):
36  24 dots
Letter (12 cpi):
30  24 dots
Report:
18  24 dots
Draft:
9  24 dots
(MODE 1)
12  24 dots
(MODE 2)
High-speed draft:
9  24 dots
Paper handling
Standard: Friction-feed platen (cut sheets)
Convertible bi-directional tractor on front or
rear
Paper loading by LOAD button Advancing
perforations to tear-off edge by TEAR OFF
button
Parking continuous forms is available.
Optional: Cut sheet feeder(for front or rear)
Tractor unit (for 2
nd
tractor)
Paper type
1 to 5-copies for cut sheet feeder
1 to 9-copies for tractor and paper table
Paper size
Continuous Width: 102-420 mm (4-16.5 in)
Length: 102 mm (4 in) or greater
Cut sheets
(Paper table)
Width: 55-420 mm (2.16-16.5 in)
Length: 70-420 mm (2.76-16.5 in)
(Cut sheet feeder)
Width: 100-420 mm (4-16.5 in)
Length:
70-420 mm for front cut sheet feeder
(2.76-16.5 in)
100-420 mm for front cut sheet feeder
(4-16.5 in)
Note:
To use cut sheets exceeding 297 mm in length, the optional large
large stacker is
FUNCTIONAL
SPECIFICATIONS