User's Manual

COMMAND SETS (DPL24CPLUS)
C-16 User's Manual
(f) a (Bits 2~0: Specifications related to the check and OCR
characters.)
Bit Content of specification value
Content of
setting
0
Check character
Additional specification
* 1
0 Added
1 Not added
1
Specification of OCR
character printing
(OCR-B is taken as the
standard)
0 Printed
1 Not printed
2
Printing position of
EAN, UPC flag
character
0
To the left of the
bar code
1
To the bottom
left of the bar
code
*1: The specification becomes invalid for the following bar
codes:
Codabar … Always the non-additional code is set.
EAN, UPC … Always the additional code is set.
*2: The flag character is printed when Bit 1 = 0.