User's Manual

INTRODUCTION
User's Manual 1-3
 Power Supply type; 100-120 V input (M33335A)
220-240 V input (M33335B)
 Interface type; Centronics parallel + USB interfaces
Centronics parallel + RS232C serial interface
 Control panel type; LED type.
LCD type.
Printer add-on options are listed below. For details, see Chapter 8.
 Cut sheet feeder. The SF940 single-bin feeder is available as an
option. Two cut sheet feeders can be installed in front of and behind
the printer at the same time. A cut sheet feeder allows single cut
sheets and multiple-part cut sheets to be fed automatically.
 Tractor unit. A second tractor unit may be bought as an additional
option if dual tractor feeding capability is required.
 LAN card. A LAN card is available as a printer add-on option. A
user installable function, the LAN card can be installed only on
printer models with the Centronics parallel + USB interfaces. For
details, see Chapter 8.
OPTIONS of DL7600Pro dot matrix printer
 Small paper table. It is used in printing a short cut sheet.
MODELS
OPTIONS
SF940 single-bin feeder (front）.
SF940 single-bin feeder (rear）.
Tractor unit (rear)
Slot for LAN card is available.
(Centronics parallel + USB interfaces MODEL)
Replacing stacker with large stacker is required
when SF940 is installed in rear side.