9P2 Bildschirm / Moniteur / Monitor / Skärm / Beeldscherm BETRIEBSANLEITUNG OPERATING MANUAL
Sie haben ... ... technische Fragen oder Probleme? Wenden Sie sich bitte an unseren Help Desk (siehe Garantiekarte). Aktuelle Informationen zu unseren Produkten, Tipps, Updates usw. finden Sie im Internet: http://www.fujitsu-siemens.com Are there ... ... any technical problems or other questions you need clarified? Please contact our Help Desk (see Warranty Card). The latest information on our products, tips, updates, etc., can be found on the Internet under: http://www.fujitsu-siemens.
Dieses Handbuch wurde auf Recycling-Papier gedruckt. This manual has been printed on recycled paper. Ce manuel est imprimé sur du papier recyclé. Este manual ha sido impreso sobre papel reciclado. Questo manuale è stato stampato su carta da riciclaggio. Denna handbok är tryckt på recyclingpapper. Dit handboek werd op recycling-papier gedrukt. Herausgegeben von/Published by Fujitsu Siemens Computers GmbH Bestell-Nr./Order No.
Deutsch English 19P2 Farbbildschirm Color monitor Moniteur couleur Monitor de color Monitor a colori Färgskärm Kleurenbeeldscherm Français Español Italiano Svenska Nederlands TCO'99 Betriebsanleitung Operating Manual Ausgabe Januar 2001 January 2001 edition
VESA, DDC und DPMS sind eingetragene Warenzeichen der Video Electronics Standards Association. Copyright ã Fujitsu Siemens Computers GmbH 2001 Alle Rechte vorbehalten, insbesondere (auch auszugsweise) die der Übersetzung, des Nachdrucks, der Wiedergabe durch Kopieren oder ähnliche Verfahren. Zuwiderhandlungen verpflichten zu Schadenersatz. Alle Rechte vorbehalten, insbesondere für den Fall der Patenterteilung oder GM-Eintragung. Liefermöglichkeiten und technische Änderungen vorbehalten.
Contents Introduction........................................................................................................................................1 Notational conventions ..............................................................................................................1 Important notes .................................................................................................................................2 Safety ................................................................
Introduction Your new 19P2 monitor supplies you with a high-quality colour image with high resolution and ergonomic refresh rates. It possesses a whole range of useful features and functions, e. g.
Colour monitor 19P2 Important notes ! In this chapter you will find information regarding safety which is essential to take note of with your monitor. Safety This device complies with the relevant safety regulations for data processing equipment, including electronic office machines for use in an office environment. If you have any questions, contact your sales outlet or our Help Desk.
Colour monitor 19P2 • • You may set only those resolutions and refresh rates specified in the "Technical data" chapter. Otherwise you may damage your monitor. If you are in any doubt, contact your sales outlet or our Help Desk. Keep this Operating Manual together with your device. If you pass on the device to third parties, you should include these. Cleaning • • • • • • Always pull out the power plug before you clean the monitor.
Colour monitor 19P2 If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • • • • Reorient or relocate the receiving antenna. Increase the separation between equipment and the receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Colour monitor 19P2 IMPORTANT The wires in this mains lead are coloured in accordance with the following code: Green and Yellow: Earth Blue: Neutral Brown: Live As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: • • • The wire which is coloured Green and Yellow must be connected to the terminal in the plug which is marked with the letter E or by the earth symbol or coloured Green or Gree
Colour monitor 19P2 Energy Star Guidelines The Fujitsu Siemens colour monitor 19P2 is designed to conserve electricity by dropping to less than 3 W when it goes into standby, suspend and OFF mode. With this new power management the 19P2 qualifies for the U.S. Environmental Protection Agency's (EPA) Energy Star Computers award. The EPA estimates that computer equipment uses 5% percent of all business electricity and it is growing rapidly.
Colour monitor 19P2 Checking the contents of the consignment Ê Ê Ê Ê Unpack all the individual parts. Remove any plastic caps from the plugs for the cables in the consignment. Check the delivery for damage incurred during transportation. Check whether the delivery agrees with the details in the delivery note.
Colour monitor 19P2 Installing an ergonomic video workstation Window Before you set up your equipment you should select a suitable position for working at the monitor. Please observe the following advises when installing a video workstation. edge of desk permissible reaching sector 600 mm Avoid direct and reflected glare. Avoid glare from electric lighting. Position the keyboard where it is easiest to reach. preferable viewing sector 0° permissible reaching sector 600 mm approx.
Colour monitor 19P2 1 1 = Power connector Ê 2 2 = Data cable Be sure that the monitor and the computer are switched off. ! The computer power plug must be pulled! The data cable (2) is permanently attached to the monitor. It has a 15-pin D-SUB connector for the monitor port of the computer. Ê Connect the 15-pin connector of the data cable to the (active) monitor port on the computer and secure the plug-in connection by tightening the safety screws.
Colour monitor 19P2 Operation of the monitor 1 1 = Control panel with buttons for screen setting 2 3 2 = Power indicator 3 = ON/OFF switch Switching the monitor on Ê Press the ON/OFF switch (3). The power indicator (2) lights up green when the computer is turned on. i If your computer has a power management function (energy-saving mode), you should read the "Notes on power management" of the monitor in this chapter.
Colour monitor 19P2 Notes on power management If your computer is equipped with power management, the monitor can support this function fully. Here the monitor does not distinguish between the individual energy-saving modes of the computer (standby mode, suspend mode and OFF mode), as it is capable of immediately switching into the mode with the highest energy-saving effect.
Colour monitor 19P2 MENU EXIT 1 2 1 = EXIT button 2 = Arrow buttons 3 4 3 = MENU button 4 = ON/OFF switch The MENU button switches the OSD menu on and selects a function in the OSD menu. The EXIT button deactivates the OSD menu or returns you from a submenu to its superior menu. With the buttons ! or " you mark the icon for a function. You make the settings for the selected function with the arrow keys $, #, ! or " respectively shown in the OSD menu.
Colour monitor 19P2 Settings with the OSD menu To set the OSD menu, perform the following steps: Ê Press the MENU button to activate the OSD menu. The main menu appears on the screen with icons for the setting functions. The last icon set is marked (in this case Position/Size). A setting window with selection options is displayed for the highlighted icon (here: Position, Size, Zoom). Ê If necessary, use the ! or " button to mark another icon, e. g. Geometry.
Colour monitor 19P2 Setting picture size (Size) ! " = Making the picture narrower or wider $ # = Making the picture shorter or longer Setting full-screen display (Zoom) ! " = Increasing or reducing the size of the screen display Setting the picture geometry Trapezoid distortion is when the top or bottom of the screen display is too wide or too narrow. Parallelogram distortion means that the sides of the picture bend to the left or right.
Colour monitor 19P2 Making picture corrections If the picture you see on screen has light and dark stripes or appears dull and blurred, this may be due to what is known as the moiré effect. This effect usually has physical causes, being triggered by interference between the pixels in the matrix and the video signal. The intensity of the moiré effect is dependent on the screen resolution and horizontal frequency. i Set the picture size, brightness, etc. before you switch on moiré reduction.
Colour monitor 19P2 Setting advanced options Calling the Advanced setting window Degaussing the monitor (Degauss) When colour shifts occur in the screen display due to the influence of magnetic fields (e. g. after transporting or turning the screen), the screen must be degaussed. Do not use the feature more than once within a 30-minute period.
Colour monitor 19P2 Notes on ergonomic colour adjustment If you select colours for the display in your application programmes, take note of the information below. The primary colours blue and red on a dark background do not produce the minimum required contrast of 3:1 and are therefore not suitable for continuous text and data entry.
Colour monitor 19P2 Electrical data Video: analogue, positive, 0.7 Vpp, 75 Ohm Synchronisation: Separate Sync. TTL Composite Sync. TTL/ Sync. on Green Horizontal frequency: 30 kHz .... 96 kHz (multi-scanning) Refresh rate: 50 Hz ....
Colour monitor 19P2 Preset operating modes The picture position and size have been set to optimum values at the factory for the operating modes listed above. Depending on the screen controller used, it may be necessary to adjust the display position and size. In this case, you can change and save the settings (see "Operation of the monitor"). i Horizontal frequency Refresh rate Screen resolution 31.5 kHz ±0.5 kHz 31.5 kHz ±0.5 kHz 50,6 kHz ±0.5 kHz 53.7 kHz ±0.5 kHz 63.0 kHz ±0.5 kHz 68.7 kHz ±0.
Colour monitor 19P2 Tilting and turning area 13° 45° 45° 5° The specified tilting area refers to the zero position of the monitor foot marked with an arrow. Error handling Should an error occur, first check the following points. If the distortion is still not eliminated, the monitor should, if possible, be checked on another computer. If you are unable to solve the problem, please inform our Help Desk.
Colour monitor 19P2 Colours are impure Ê Degauss the monitor with the OSD menu (see "Operation of the monitor"). White does not look white Ê Set the colour temperature with the OSD menu (see "Operation of the monitor"). Screen display has lines (Moiré), is dull or blurred Ê Ê Ê Set the brightness and contrast (see "Operation of the monitor"). Degauss the monitor with the OSD menu (see "Operation of the monitor"). Set the moiré reduction with the OSD menu (see "Operation of the monitor").
