OPERATING MANUAL Monitor 19P2

Colour monitor 19P2
A26361-K713-Z100-1-5E19 English - 19
Preset operating modes
i
The picture position and size have been set to optimum values at the factory for the
operating modes listed above. Depending on the screen controller used, it may be
necessary to adjust the display position and size. In this case, you can change and save
the settings (see "Operation of the monito
r
").
Horizontal frequency Refresh rate Screen resolution
31.5 kHz ±0.5 kHz
31.5 kHz ±0.5 kHz
50,6 kHz ±0.5 kHz
53.7 kHz ±0.5 kHz
63.0 kHz ±0.5 kHz
68.7 kHz ±0.5 kHz
80.8 kHz ±0.5 kHz
91.2 kHz ±0.5 kHz
93.1 kHz ±0.5 kHz
60 Hz ± 2Hz
70 Hz ± 2Hz
100 Hz ± 2Hz
85 Hz ± 2Hz
100 Hz ± 2Hz
85 Hz ± 2Hz
100 Hz ± 2Hz
85 Hz ± 2Hz
100 Hz ± 2Hz
640 x 480
720 x 400
640 x 480
800 x 600
800 x 600
1024 x 768
1024 x 768
1280 x 1024
1152 x 864
For ergonomic reasons we recommend a refresh rate of at least 75 Hz and a maximum resolution of
1024 x 1280 pixels.
Pin assignment D-SUB (15-pin)
1
5
6
10
11
15
Pin Meaning Pin Meaning
1 Red video input 9 5 V for DDC
2 Green video input / Sync. on green 10 Logic ground
3 Blue video input 11 Monitor ground
4 Monitor ground 12 DDC data (SDA)
5 DDC Return 13 H. sync (H/V comp. Sync.)
6 Red video ground 14 V. sync
7 Green video ground 15 DDC Clock
8 Blue video ground (SCL)