- Fujitsu Laptop PC BOIS Guide

Hard Disk Security Submenu of the Security Menu

The Hard Disk Security submenu is for configuring hard disk security features.

Figure 14. Hard Disk Security Submenu

Table 14: Fields, Options and Defaults for the Hard Disk Security Submenu of the Security Menu

Menu Field Options Default Description

Drive0 Password Is:

___

Clear Display-only. Default is Clear. When the Drive0 Password has been set, the field

changes to Set. When this password is set, the primary hard disk drive cannot be

used in another system unless the password is entered.

Set Drive0

Password:

___

[Enter] Sets, changes or cancels the Drive0 Password. The Drive0 Password may be up to

seven characters long and must include only letters or numbers (no symbols). Pass-

words are NOT case-sensitive. When a Drive0 Password is set, it must be used to

access the hard drive if it is used in another system. Note that the password will not

take effect until the system has been rebooted.

Password Entry on

Boot:

■

Disabled

■

Enabled

[Enabled] When set to disabled, entry of a Hard Disk Password is not required before OS boot.

(The hard disk is still password-protected without password entry.)

F1 Help

ESC Exit

Select Item

Select Menu

-/Space

Enter

F9 Setup Defaults

F10 Save and Exit

Change Values

Select Sub-Menu

▲

Item Specific HelpHard Disk Security

Drive0 Password Is: Clear

Set Drive0 Password [Enter]

Password Entry on Boot: [Enabled]

Phoenix TrustedCore(tm) Setup Utility

Info System Advanced Security Boot Exit

Security Menu