Digital KVM Switch User Guide

Setting Console Security Analog Operation
20
590-673-501A
To automatically log out of a Server Module when inactive:
 In the Main dialog box, click Setup and then click Security. If you have password
protection, the Password dialog box appears.
 Type your password, and then click OK. The Security dialog box appears.
 In the Inactivity Time field, enter the length of time you want to stay connected to a
Server Module before it automatically disengages you.
 Click OK.
To remove password protection from your console:
 In the Main dialog box, click Setup and then click Security. The Password dialog
box appears.
 Type your password, and then click OK.
 In the Security dialog box, single-click and press Enter
or double-click in the New
field. Leave the box blank. Press Enter
.
 Single-click and press Enter or double-click in the Repeat box. Leave the field
blank. Press Enter
.
 Click OK if you only want to eliminate your password.
To enable the screen saver mode with no password protection:
CAUTION: There is no master password. The BX600 appliance must be sent to Fujitsu Siemens in the case of a
lost password.
 If your console does not require a password to gain access to the Security dialog
box, continue to the next step.
- or -
If your console is password protected, see the previous procedure, To remove
password protection from your console:
 Select Enable Screen Saver.
 Type the number of minutes for delay time (from 1 to 99) that you want to delay acti-
vation of the screen saver.
 Choose Energy if your monitor is ENERGY STAR™ compliant; otherwise select
Screen.
CAUTION: Monitor damage can result from the use of Energy mode with monitors not compliant with ENERGY
STAR™.
 (Optional) Click Test to activate the screen saver test which lasts 10 seconds then
returns you to the Security dialog box.
 Click OK.
NOTE: Activation of the screen saver mode disconnects the user from a Server Module; no Server Module is
selected. The status flag displays Free.
To exit the screen saver mode:
Press any key or move your mouse. The Main dialog box appears.