User's Manual

ManualsBrandsFujitsu Siemens Computers Manualscomputers & electronicsFMWCC35

6/99 58-0672-00A

FMWCC35

Portfolio Case

Installation Instructions

PenCentra 130

The PenCentra 130 portfolio case is designed to provide

a compact, elegant solution for using and transporting

your pen tablet and keyboard.

The portfolio case consists of two distinct storage areas: a

pen tablet easel and a keyboard platform.

To open the portfolio, pull up the Velcro

strip that is

securing the back flap, as shown in Figure 1. Unzip the

wraparound zipper and flip the portfolio open. Extend

the back flap so that it forms a stand for the pen tablet.

(see Figure 2).

Figure 1. Closed Portfolio Case

Figure 2. Open Portfolio Case

Back Flap

Wraparound

Zipper

Shoulder Strap

Easel

Back

Screen Flap

Tablet

Platform

Tablet

Ledge

Velcro®

strips (4 places)

Cable

Strap

Battery/

Pen Straps

Detach the Velcro

strips securing the vinyl screen flap

and lay it over the back of the easel to reveal the pen

tablet platform. At the bottom of the platform is a

flexible ledge upon which the pen tablet sits. To the

right of the ledge is an elasticized strap for securing a

spare battery; a smaller strap for securing your pen is

affixed to the top of the battery strap.

Installing the PenCentra 130 0

Tuck your PenCentra 130 behind the ledge lip and lay

the system flat onto the platform. It should be a snug

fit. When storing your pen tablet in the portfolio, lay

the nylon flap over the screen to protect it from

scratches. See Figure 3 for a fully assembled system in

the portfolio.

Figure 3. Assembled PenCentra 130 in Portfolio

Installing the Keyboard 0

To install the keyboard, first remove the adhesive

backing from the four Velcro

strips that are positioned

at the ends of the two strips on the keyboard platform.

Holding the keyboard directly over the adhesive strips,

carefully lower it so that is centered on the platform.

Press the keyboard down to create a strong adhesive

bond.

Unfasten the Velcro

-backed cable strap located

behind the keyboard. Route the keyboard cable

through the cable strap and fasten the strap. Plug the

keyboard cable into the PS/2-style port on the right

side of the pen tablet.

Cable

Strap

PS/2

Port

Summary of content (2 pages)

PAGE 1
FMWCC35 Portfolio Case Installation Instructions PenCentra 130 The PenCentra 130 portfolio case is designed to provide a compact, elegant solution for using and transporting your pen tablet and keyboard. The portfolio case consists of two distinct storage areas: a pen tablet easel and a keyboard platform. To open the portfolio, pull up the Velcro® strip that is securing the back flap, as shown in Figure 1. Unzip the wraparound zipper and flip the portfolio open.
PAGE 2
Carrying an Extra Battery 0 To carry an extra PenCentra 130 battery, stretch out the elasticized battery strap and slip the battery behind it. On the front of the strap, there is an elasticized pen holder with which you can store your pen when not in use. Attaching the Shoulder Strap 0 To attach the shoulder strap, open the spring-loaded clips on the end of the strap, and attach them to the shoulder strap D-rings on either side of the portfolio case (see Figure 1).