Sie haben ... ... technische Fragen oder Probleme? Wenden Sie sich bitte an: • unsere Hotline: Mo-Fr: 9 - 18 Uhr Sa: 9 - 14 Uhr Tel.: ++49 (0) 180 3777 000 • einen unserer Servicepartner • Ihren zuständigen Vertriebspartner • Ihre Verkaufsstelle Die Adressen Ihrer Servicepartner finden Sie im Garantieheft oder im Service-Adressenheft. Aktuelle Informationen zu unseren Produkten, Tips, Updates usw. finden Sie im Internet: http://www.fujitsu-siemens.com Is there ... ...
! " # $ % & ' ( ) * + * , &- , .
Deutsch English MCM 17P2 Farbbildschirm Color monitor Moniteur couleur Monitor de color Monitor a colori Färgskärm Kleurenbeeldscherm Français Español Italiano Svenska Nederlands TCO'99 Betriebsanleitung Operating Manual Ausgabe Oktober 1999 October 1999 edition
VESA, DDC und DPMS sind eingetragene Warenzeichen der Video Electronics Standards Association. Alle Rechte vorbehalten, insbesondere (auch auszugsweise) die der Übersetzung, des Nachdrucks, der Wiedergabe durch Kopieren oder ähnliche Verfahren. Zuwiderhandlungen verpflichten zu Schadenersatz. Alle Rechte vorbehalten, insbesondere für den Fall der Patenterteilung oder GM-Eintragung. Liefermöglichkeiten und technische Änderungen vorbehalten. Copyright Fujitsu Siemens Computers B. V.
Contents Introduction ....................................................................................................................................... 1 Notational conventions.............................................................................................................. 1 Important notes................................................................................................................................. 2 Safety ...............................................................
Introduction Your new MCM 17P2 monitor supplies you with a high-quality color image with high resolution and ergonomic refresh rates. It possesses a whole range of useful features and functions, e. g.: • • 17" (40 cm) high-resolution CRT (0.
Color monitor MCM 17P2 Important notes ! In this chapter you will find information regarding safety which is essential to take note of with your monitor. Safety This device complies with the relevant safety regulations for data processing equipment, including electronic office machines for use in an office environment. If you have any questions, contact your sales outlet or our customer service center.
Color monitor MCM 17P2 • • You may set only those resolutions and refresh rates specified in the "Technical data" chapter. Otherwise you may damage your monitor. If you are in any doubt, contact your sales outlet or customer service center. Keep this Operating Manual together with your device. If you pass on the device to third parties, you should include this manual. Cleaning noteMCM 17P2 • • • • • • Always pull out the power plug before you clean the monitor.
Color monitor MCM 17P2 Note on X-ray radiation This device complies with the German X-ray regulations (Röntgenverordnung - RöV). The local dosage emitted is less than 1 µSv/h (micro-Sievert per hour) at a distance of 0.1m. FCC Class B Compliance Statement If there is an FCC statement on the device, then: The following statement applies to the products covered in this manual, unless otherwise specified herein. The statement for other products will appear in the accompanying documentation.
Color monitor MCM 17P2 Please consult the following table for the selection criteria for power cables used in the United States and Canada. Cable type Size of conductors in cable Maximum current rating of the device SJT 18 AWG 16 AWG 14 AWG 10 Amps 12 Amps 12 Amps SVT 18 AWG 17 AWG 10 Amps 12 Amps For the United Kingdom Should the plug on the flexible cord not be of the type for your socket outlets, do not use an adapter but remove the plug from the cord and discard.
Color monitor MCM 17P2 If you have any questions on disposal, please contact your local office, our customer service center, or: Fujitsu Siemens Computers GmbH Recyclingcenter D-33106 Paderborn Tel.: ++ 49 5251 - 818 010/ Fax: ++ 49 5251 - 818 015 Checking the contents of the consignment Unpack all the individual parts. Check the delivery for damage incurred during transportation. Check whether the delivery agrees with the details in the delivery note.
Color monitor MCM 17P2 preferable viewing sector 0° approx. 90° 65° 30° 60° 30° permissible 65° viewing sector permissible viewing sector Position the monitor for optimum viewing. The viewing distance to the monitor should be approximately 50 cm. approx. 90° and more Keep ventilated areas clear. Remember to maintain correct posture. Connecting the monitor See your PC's operating manual for details of the ports on the system unit.
Color monitor MCM 17P2 The data cable (2) is permanently attached to the monitor. It has a 15-pin D-SUB connector for the screen controller of the system unit. See your PC's operating manual for details of the ports on the system unit. Connect the 15-pin connector of the data cable to the (active) monitor port on the system unit and secure the plug-in connection by tightening the safety screws.
Color monitor MCM 17P2 Switching the monitor off Press the ON/OFF switch (3). The power indicator (2) is dark. Notes on power management If your PC has a VESA DPMS (Video Electronics Standard Association, Display Power Management Signaling) power management function (energy-saving mode), your monitor will fully support this function. The monitor has a four-stage power management system.
Color monitor MCM 17P2 Changing the monitor settings Using the buttons on the control panel and the setting control on the underside of the monitor, you can call and operate the integrated OSD menu (On-Screen Display) on screen. i The OSD menu is available in five languages. The English menu names are used in the following description (default setting). How you set a different language for the OSD menu is described in the section "Setting display options (ADVANCED CONTROLS)".
Color monitor MCM 17P2 Settings with the OSD menu To set the OSD menu, perform the following steps: Press the OSD button to activate the OSD menu. The main menu appears on the screen with icons for the setting functions. 1024 x 768 68.7KHZ 85HZ MAIN MENU For preset modes you will find information about the current resolution, horizontal frequency and refresh rate in the top line. SIZE & POSITION For all non-preset modes, New Mode is displayed.
Color monitor MCM 17P2 Setting picture size and position (SIZE & POSITION) Calling the SIZE & POSITION sub menu Proportional picture size (ZOOM): Increasing or reducing picture size while retaining the side ratios Horizontal picture position (HORIZONTAL POSITION): Shifting the picture to the left or to the right Horizontal picture size (HORIZONTAL SIZE): Making the picture narrower or wider Vertical picture position (VERTICAL POSITION): Shifting the picture down or up VERTICAL SIZE: Making the picture s
Color monitor MCM 17P2 Setting the picture geometry (GEOMETRY) Tilt distortion must be set when the screen display is not axially symmetrical. Pincushion distortion is when the sides of the screen display are bent inward or outward. Trapezoid distortion is when the top or bottom of the screen display is too wide or too narrow. Parallelogram distortion means that the sides of the picture bend to the left or right.
Color monitor MCM 17P2 Setting color temperature and colors (COLOR TEMPERATURE) The "warmth" of the screen colors is set using the color temperature. The screen has two preset color temperatures, 9300 K and 6500 K, and two user-defined color temperatures (User 1 and 2). You can select any of both color temperatures as the starting point for setting your color percentage values.
Color monitor MCM 17P2 Setting display options (ADVANCED CONTROLS) With the options in the ADVANCED CONTROLS submenu the energy saving mode of the monitor (power management) can be switched on/off, the language for the OSD menu selected, DDC1/2B switched on/off, the display time of the OSD menus set and the moiré effect corrected.
Color monitor MCM 17P2 Degaussing the monitor (DEGAUSS) Magnetic fields can affect how colors are displayed on your monitor screen. The monitor is therefore degaussed every time you switch it on. Only use the function of the OSD menu if you notice color distortions on the screen after switching on the monitor. Degaussing the monitor (DEGAUSS) This function should only be carried out once within 30 minutes.
Color monitor MCM 17P2 Technical data Dimensions and weight CRT: 40 cm (17“) Visible diagonals: 35 cm Dot pitch: 0,26 mm Maximal resolution: 1600 x 1200 pixels Preset display area: 306 mm x 230 mm Maximal display area: 323 mm x 242 mm Dimensions (W x H x D): 454 mm x 424 mm x 226 mm Weight: 17.5 kg Accessories: Power cable (1.
Color monitor MCM 17P2 VESA-DDC-compatible VGA interface Your monitor is equipped with a VESA-DDC-compatible VGA interface. VESA-DDC (Video Electronics Standard Association, Display Data Channel) is used as the communications interface between the monitor and the PC. If your PC is equipped with a VESA-DDC-compatible VGA interface, it can automatically read the data for ensuring optimum operation from your monitor and select the appropriate settings.
Color monitor MCM 17P2 Pin assignment D-SUB (15-pin) 5 1 6 10 15 11 Pin Meaning Pin Meaning 1 Red video input 9 not connected 2 Green video input 10 Logic ground 3 Blue video input 11 Ground 4 Ground 12 Serial DDC data line (SDA) 5 DCC return 13 H. sync 6 Red video ground 14 V.
Color monitor MCM 17P2 Error handling Should an error occur, first check the following points. If the distortion is still not eliminated, the monitor should, if possible, be checked on another PC. If you cannot solve the problem, contact our customer service center. The screen display is too small or not centered The monitor recognizes an undefined mode (see "Technical data"). Adjust the position and the size of the display and save your settings (see "Operation of the monitor").
