- Fujitsu Computer Systems Corporation Mini-Dock Stylistic LT P-600 User Guide

■

Video Port

Used for connecting a video monitor for displaying the

contents of the pen tablet screen.

■

Floppy Disk Drive Port

Used for connecting the optional floppy disk drive.

■

PS/2-style Keyboard Port

Used for connecting a PS/2-style keyboard connector.

■

LAN Port

Used for connecting the pen tablet’s optional internal LAN

module to a LAN hub.

Notes: The mini-dock is required in order to use the internal

LAN module; there is no LAN port on the pen tablet.

A ferrite core is supplied with the mini-dock. To comply

with FCC Class B requirements, use the ferrite core on

the LAN cable (not supplied). Installation instructions

are included in the ferrite core packaging.

■

USB Port

Used for connecting Universal Serial Bus-compliant

devices.

The viewing angle of the mini-dock can be adjusted to four

different positions. The bottom of the support bail on the

rear of the support platform (see Figure 3) snaps into one of

four slots. When storing the mini-dock, flip the bail up

against the back of the support platform to allow the plat-

form to lie flat.

Note that the right-hand support can be removed to accom-

modate an optional wireless module (see Figure 4). To

remove the support, slide it upwards until it unlatches from

the support platform.

minidock.fm Page 2 Tuesday, August 21, 2001 3:30 PM