- Fujitsu Computer Systems Corporation LifeBook Owner's Manual

4
LifeBook N Series Notebook BIOS
MAIN MENU – SETTING STANDARD SYSTEM PARAMETERS
The Main Menu allows you to set some of the current
system parameters. Follow the instructions for Navi-
gating Through The Setup Utility to make any changes.
(See Navigating Through The Setup Utility on page 2 for
more information.)
The following tables show the names of the menu fields
for the Main menu and its submenus, all of the options
for each field, the default settings, and a description of
the field’s function and any special information needed
to help understand the field’s use.
Figure 2. Main Menu
Table 2: Fields, Options and Defaults for the Main Menu
Note that the parameters listed in the following table may vary depending upon your system’s configuration.
Menu Field Description
System Date and Time
When selected, opens the System Date and Time submenu, which allows you to change the system date
and time. Note that
System Date and Time can also be set from your operating system without
using the setup utility. Use the Date and Time icon on your Windows Control panel.
(Figure 3)
IDE Settings When selected, opens the IDE Settings submenu, which allows setting the timing for the hard drive, the
ATA/ATAPI device(s) to use, and enabling or disabling the SMART function.
Language When selected, opens the Language submenu, which allows you to select the language to be used.
Insyde Software SCU
2005/06/21 4:56:37 PM
Main Advance Security Boot Exit
System
Primary Master : FUJITSU_DK23FA-60
BIOS Version : x.xx
BIOS Date : xx/xx/xx
BIOS Area: E000h - FFFFh
Supervisor Password Is: Clear
User Password Is: Clear
Primary Master Password Is: Clear
Asset Number: None
Owner Information Is: Clear
CPU
Intel(R) Pentium(R) M 750
Speed: 1.86 GHz
L1 Cache: 64 KB
L2 Cache: 2048 KB
Memory
Total : 512 MB
Slot 1 : 256 MB DDR2
Slot 2 : 256 MB DDR2
Adjust system date and time.
A DVDRAM GMA-4080N
BIOS Date: xx/xx/xx
IDE Settings
Language
System Date and Time