Server Options Guide

26 Options Guide TX120
Expanding/replacing the main memory Main memory
Installing a memory module
Figure 8: Installing a memory module
Ê Fold the assembly brackets outwards on both sides of the corresponding
slot.
Ê Insert the memory module into the slot with the connecting contacts and the
notch first until the side brackets engage on the memory module.
Ê Install the crosspiece (see section “Installing the crosspiece” on page 43).
Ê Close the server (see section “Assembling the server” on page 44).
Ê If necessary, place the server in the vertical position as described in the
operating manual
Ê Connect the system to the line voltage and switch it on.