Server Options Guide

TX120 Options Guide 27
6 Accessible drives
V CAUTION!
Follow the safety instructions in chapter “Safety” on page 13.
A 3.5-inch bay for an HDD extension box (with a maximum of two HDD modules)
or a backup drive is available.
6.1 Installing an HDD extension box
Ê Open the server (see section “Opening the server” on page 19).
Ê Remove the crosspiece (see section “Removing the crosspiece” on
page 20).
Ê Remove the drive cage (see section “Removing the drive cage” on page 21).
Figure 9: Removing the protection shield from the 3.5-inch bay
Ê Grasp the protection shield through the holes and pull it out in the direction
of the arrow.
V CAUTION!
Store the protection shield in a safe place. If you remove the HDD
extension box again and don't replace it with a new one, you must
install the protection shield instead for purposes of cooling, to comply
with EMC regulations and to prevent fire.