Server Options Guide

TX120 Options Guide 35
Accessible drives Installing a backup drive
Figure 18: Removing the dummy cover from the top cover
Ê Press the dummy cover outwards from the top cover in the direction of the
arrow.
V CAUTION!
Keep the dummy cover in a safe place. If the backup drive is removed
again and not replaced with a new one, then the dummy cover must
be reinstalled due to cooling, the applicable EMC regulations (regula-
tions on electromagnetic compatibility) and fire protection.
Ê Close the server (see section “Assembling the server” on page 44).
Ê If necessary, place the server in the vertical position as described in the
operating manual
Ê Connect the system to the line voltage and switch it on.