- Fujitsu Siemens Servers Dynamic Reconfiguration (DR) User's Guide

A-14 SPARC Enterprise Mx000 Servers Dynamic Reconfiguration User’s Guide • September 2007
Memory operation refused: dr@0:SBX::memory
[Explanation] The DR operation is refused.
[Remedy] Respond in the manner directed by the other message.
Memory operation cancelled: dr@0:SBX::memory
[Explanation] The DR operation is canceled.
[Remedy] Respond in the manner directed by the other message.
No device(s) on board: dr@0:SBX
[Explanation] There may be inconsistency in the system.
[Remedy] Please contact customer service.
[Output] Console and Standard Output
Non-relocatable pages in span: dr@0:SBX::memory
[Explanation] There is non-relocatable (kernel) memory on the system board.
[Remedy] The target board with kernel memory cannot be disconnected by DR. It
depends on the hardware model if you can remove a kernel memory board or
not.
Operator confirmation for quiesce is required: dr@0:SBX::memory
[Explanation] There is non-relocatable (kernel) memory on the board.
[Remedy] The target board with kernel memory cannot be disconnected by DR.
[Output] Console and Standard Output
Unexpected internal condition: drmach.c #
[Explanation] There may be inconsistency in the system.
[Remedy] Please contact customer service.
[Output] Console and Standard Output
Unexpected internal condition: SBX
[Explanation] The attempt to call OBP failed.
[Remedy] Repeat the action. If this error message appears again, please contact
customer service.
[Output] Console and Standard Output
Device busy: dr@0:SBX::cpuY
[Explanation] CPU Y on system board X is busy during release operation.