- Fujitsu Siemens Servers Dynamic Reconfiguration (DR) User's Guide

Chapter 4 Practical Examples of DR 4-25

8. Check the status of the move-destination domain and moved system board.

Execute the showdcl(8) command to check the operation status of the move-

destination domain, and then execute the showboards(8) command to check the

status of the system board and confirm that addition of the system board has

been reserved in the move-destination domain.

9. Add the system board to the move-destination domain.

Execute the addboard(8) command to add the system board to the move-

destination domain. If the move-destination domain is in stopped status, the

system board will be added the next time the domain is booted.

10. Check the status of the move-destination domain and moved system board.

Execute the showdcl(8) command to check the operation status of the move-

destination domain, and then execute the showboards(8) command to check the

status of the moved system board.

XSCF> showdcl -d 0

DID LSB XSB Status

00 Running

00 00-0

01 00-1

02 01-0

XSCF> showboards 01-0

XSB DID(LSB) Assignment Pwr Conn Conf Test Fault

------------------------------------------------------------------

01-0 00(02) Assigned y n n Passed Normal

XSCF> addboard -c configure -d 0 01-0