- Fujitsu Siemens Servers Dynamic Reconfiguration (DR) User's Guide

Appendix A Message Meaning and Handling A-29
[Explanation] Confirming whether DR operation is going to be executed or not.
Input "y" to execute it and "n" to stop it.
DR operation canceled by operator.
[Explanation] DR operation canceled by operator.
Domain (DomainID X) is not currently running.
[Explanation] Destination domain #X was not active when "-c configure" was
specified.
[Remedy] Execute it by specifying "-c assign".
XSB#XX-X cannot be moved due to System Board Pool.
[Explanation] The XSB in the system board pool cannot be moved.
[Remedy] Executing addboard command.
XSB#XX-X is not installed.
[Explanation] System board (XSB#XX-X) is not installed.
[Remedy] Specify the wrong XSB. Confirm the XSB by showboards(8).
XSB#XX-X is currently unavailable for DR. Try again later.
[Explanation] The specified system board (XSB#XX-X) has already been executed
by another operation.
[Remedy] DR or power-off has been executing for another session. Try again after
waiting for a while, with the confirmation of the XSB status.
XSB#XX-X has not been registered in DCL.
[Explanation] System board (XSB#XX-X) is not registered to DCL.
[Remedy] Register DCL information by setdc(8).
Another DR operation is in progress. Try again later.
[Explanation] The specified system board (XSB#XX-X) has already been executed
by another session.
[Remedy] DR operation is in progress by another session. Try again after waiting
for a while, with the confirmation of the XSB status.
XSB#XX-X is the last LSB for DomainID X, and this domain is
still running. Operation failed.
[Explanation] XSB#XX-X is the last LSB for domain#X.