Operation Manual

440 N00052 55
Memory expansion
Your notebook is equipped with a 128MB, 256MB or 512MB memory module. The notebook will not
start without a memory module, as no fixed main memory is installed.
!
The notebook must be switched off when installing/removing the memory modules, it
must not be in Suspend mode.
Use only memory expansions which have been released for your notebook (128, 256,
and 512 Mbyte modules, PC 266 DDR SO DIMM, 144 pin JEDEC).
Never use force when installing or removing memory modules.
Make sure that foreign objects do not fall into the memory module compartment.
Installing memory modules
Ê Switch the notebook off.
Ê Close the LCD screen so that it locks into place.
Ê Unplug the power adapter from the mains outlet.
Ê Disconnect all cables connected to the notebook.
Ê Turn the notebook over.
Ê Place the notebook on a flat surface.
Ê Remove the battery (see "Inserting and removing the battery").
Removing cover