Operation Manual

Using your notebook for the ﬁ rst time

Selecting the location

Location, selecting theNotebookPower adapter

Select a suitable location for the notebook before setting it up. Consider

the following points when selecting a location:

• Never place the no tebook on a s oft surface (e.g. carpeting, upholste red furniture,

bed). This can block the air vents and cause damage due to overheating.

• Do not p lace the notebook directly on your legs for extended periods. The

underside of the notebook heats up during normal operation. Extended contact

with the skin can become unpleasant or even result in burns.

• Place the notebook on a stable, ﬂat, non-slip surface. Please note that

the rubber feet may mark certain types of surfaces.

• Keep other objects 100 mm away from the notebook and its mains

adapter to ensure adequate ventilation.

• Never cover the ventilation slots on the noteb ook or the mains adapter.

• Do not expose the notebook to extreme environmental conditions. Protect

the notebook ag ainst dust, humidity and heat.

Connecting the power adapter

Preparing for operationPower adapter

Please refer to the instructions

in "

Safety information", Page 4.

The power cable supplied conforms

to the requirements of the country in which

you purchased your note book. Mak

e sure that the power cable is approved

for use in the country in which y

ou intend to use it.

The mains adapter’s power cable

must only be connected to a m ains socket

if the notebook is conne cted to

the mains adapter.

Make sure that the rated current

of the mains adapter is not higher than that of the

power system to which you conne

ct it (see tech nical data for the mains adapter).

► Connect the mains adapter cable (1) to the

DC jack (DC IN) on the notebook.

► Plug the power cable (2) into the

mains ada pter.

► Plug the power cab le (3) into a mains outlet.

10600790720, edition 1 9