Operation Manual

Removing and in stalling components
during servicing
Removing the hard disk
► Switch you r notebook off.
Hard disk
► Close the LCD screen.
► Unplug the mains plug of the mains adapter from the mains socket .
► Disconnect all cables connected to the notebook.
► Turn your notebook over and place it on a stable, sturdy, flat surface. If necessary, lay an
anti-slip cloth on this surface to prevent the no tebook from being scratched.
► Remov e the battery (see "
Removing the battery", Page 12).
3
2
1
1
► Remove the screws (1).
► Lift off the cover (2).
► Pull the hard disk out of the bay in the
direction of the arrow (3).
Installing the hard disk
3
3
1
2
► Pushtheharddiskintoth
e hard disk
bay (1) in a straight line
.
► Position the cover (2).
► Secure the cover with the s
crews (3).
► Install the battery again (see "
Battery: inserting", Page 12).
► Turn the notebook the right way up and place it on a flat surface.
► Reconnect the cables that yo u disconnected previously.
18 A26391-K195-Z120-1-7619, edition 1