Operation Manual

5.2 Error Indications in the Function Number Display

When any error occurrs, the operator panel indicates "U" followed by a number alternately for tem-

porary errors, or "E" followed by a number for device alarms (permanent error).

Temporary errors can be resolved by the operator, but the device alarm requires recovery works by

support engineers.

When the Error Recovery Guide is installed on your PC and if any error or device alarm has

occurred, this software displays information such as error names and error codes regarding the

error/alarm. Take notes of the information and click [Details] on its window to learn detailed infor-

mation for troubleshooting.

■ Temporary Errors:

A number appearing in alternation following the "U" refers to the following type of errors:

Indication Meaning Solution

U1 A paper feed error occurred. Remove the jammed documents.

(Refer to "5.1 Removing Jammed

Documents" on page 80.)

Confirm that the documents meet the

paper conditions for scanning. (Refer

to "6.2 Document Quality" on page

103. )

U2 A multi feed error occurred. Press the [Send to] button on the

Operator Panel.

The papers that were multi fed will be

ejected.

U6 The print cartridge is not set. This is a temporary error related with

the Imprinter option (sold separately).

For details refer to 553PR Operator's

Guide, chapter "5 Error Message".

HINT

The Error Recover Guide is stored in Setup CD-ROM. For installing the

application software, refer to "2.3 Installing the Scanner Application" in fi-

5530C Getting Started.