Flatpanel TV Deutsch, English, Français, Español, Italiano, Português Betriebsanleitung / Operating Manual MYRICA VQ32-1 / MYRICA VQ40-2
Sie haben ... ... technische Fragen oder Probleme? Wenden Sie sich bitte an unseren Help Desk (siehe Garantieheft). Aktuelle Informationen zu unseren Produkten, Tipps, Updates usw. finden Sie im Internet: www.fujitsu-siemens.com Are there ... ... any technical problems or other questions you need clarified? Please contact our Help Desk (see Warranty Booklet). The latest information on our products, tips, updates, etc., can be found on the Internet under: www.fujitsu-siemens.
Dieses Handbuch wurde erstellt von/This manual was produced by Xerox Global Services Herausgegeben von/Published by Fujitsu Siemens Computers GmbH Domagk-Street 28 D-80807 Munich Germany AG 11/06 Ausgabe/Edition 1 Bestell-Nr./Order No.
Deutsch English MYRICA VQ32-1 / MYRICA VQ40-2 Français Español Italiano Betriebsanleitung Operating Manual Ausgabe November 2006 November 2006 edition Português
Alle Rechte vorbehalten, insbesondere (auch auszugsweise) die der Übersetzung, des Nachdrucks, der Wiedergabe durch Kopieren oder ähnliche Verfahren. Zuwiderhandlungen verpflichten zu Schadenersatz. Alle Rechte vorbehalten, insbesondere für den Fall der Patenterteilung oder GM-Eintragung. Liefermöglichkeiten und technische Änderungen vorbehalten.
Inhalt Einleitung ............................................................................................................................................ 1 Darstellungsmittel ................................................................................................................................. 2 Wichtige Hinweise .............................................................................................................................. 3 Sicherheitshinweise..................................
Inhalt Bildformate für AV-Quellen (TV, CVBS, YC, SCART1, SCART2, HDMI1, HDMI2)....................40 Bildformate für VGA-Quellen ......................................................................................................41 Erweiterte Toneinstellungen................................................................................................................42 Einstellung Benutzer-Equalizer...................................................................................................
Einleitung In diesem Handbuch finden Sie wichtige Informationen, die Sie für die Inbetriebnahme Ihres TVGeräts benötigen. Der LCD-TV bietet vielfältige Anschlussmöglichkeiten für DVD–Player, Videorecorder, Videokamera, etc. Egal ob Fernseh-, Video-Bilder, alle werden gestochen scharf und verzerrungsfrei auf der völlig planen Bildschirmoberfläche dargestellt. Dabei zeichnen sich die Bilder durch eine hervorragende Helligkeit und außergewöhnliche Brillanz aus.
MYRICA VQ32-1 / MYRICA VQ40-2 Darstellungsmittel In diesem Handbuch finden Sie folgende Darstellungsmittel: ! i kennzeichnet Hinweise, bei deren Nichtbeachtung Ihre Gesundheit, die Funktionsfähigkeit Ihres TV-Geräts oder die Sicherheit Ihrer Daten gefährdet ist. Die Gewährleistung erlischt, wenn Sie durch Nichtbeachtung dieser Hinweise Defekte am TV-Gerät verursachen. kennzeichnet wichtige Informationen für den sachgerechten Umgang mit dem System.
MYRICA VQ32-1 / MYRICA VQ40-2 Wichtige Hinweise In diesem Kapitel finden Sie Sicherheitshinweise, die Sie beim Umgang mit Ihrem TV Gerät unbedingt beachten müssen. ! i i Vermeiden Sie Standbilder auf dem Bildschirm für einen längeren Zeitraum, z. B. Standbilder bei Videos, Sender-Label oder ähnliche (maximal 1 Stunde). Diese Bilder können sichtbar bleiben! Vermeiden Sie ebenso den längeren Betrieb in einem Bildmodus, in dem schwarze Balken sichtbar sind (Betrieb im Bildformat 4:3).
MYRICA VQ32-1 / MYRICA VQ40-2 ● Während eines Gewitters dürfen Sie Antennen- und Datenübertragungsleitungen weder anschließen noch lösen. ● Achten Sie darauf, dass keine Gegenstände (z. B. Schmuckkettchen, Büroklammern etc.) oder Flüssigkeiten in das Innere des Geräts gelangen (Gefahr von elektrischem Schlag, Kurzschluss). ● Es dürfen keine mit Flüssigkeiten gefüllten Gegenstände, z. B. Vasen, auf das Gerät gestellt werden.
MYRICA VQ32-1 / MYRICA VQ40-2 Ungünstige Bedingungen können zu einem Brummen Ihres LCD-TVs führen. Das Brummen kommt im allgemeinen aus der Netzspannungsversorgung und kann durch die Verbindung von unterschiedlichen Schutzleitern entstehen. Abhilfe können Sie hier schaffen, in dem Sie einen sogenannten Mantelstromfilter zwischen die ankommende Antennenleitung und den Antenneneingang am Bildschirm schalten. Die Mantelstromfilter werden in Form eines kleinen Zwischensteckers im Fachhandel angeboten.
MYRICA VQ32-1 / MYRICA VQ40-2 Reinigung Bevor Sie mit der Reinigung beginnen, schalten Sie das Gerät aus und ziehen den Netzstecker aus der Steckdose. Reinigung des Bildschirmes ● Für die Reinigung des Bildschirmes verwenden Sie ein mildes Reinigungsmittel in Verbindung mit einem weichen Tuch. ● Das Reinigungsmittel darf keine Ketone (z.B. Azeton) oder Ethylalkohol enthalten.
MYRICA VQ32-1 / MYRICA VQ40-2 Bei Störungen Ziehen Sie den Netzstecker aus der Steckdose, wenn das Gerät beschädigt ist. Sofort den Netzstecker aus der Steckdose ziehen, wenn Rauch, unangenehmer Geruch oder ungewöhnliche Geräusche aus dem Gerät kommen. Verfahren Sie ebenfalls in dieser Weise, wenn das Gerät nach dem Einschalten oder während des Betriebes kein Bild mehr darstellen kann. Versuchen Sie nicht den Bildschirm in diesem Zustand weiter zu betreiben. Öffnen Sie auf keinen Fall das Gerät selbst.
MYRICA VQ32-1 / MYRICA VQ40-2 Überprüfen der Lieferung Die Display-Oberfläche des TV-Geräts ist druck- und kratzempfindlich. Bitte fassen Sie das Gerät deshalb grundsätzlich nur am Gehäuse an. ! ► Packen Sie alle Teile aus. ► Prüfen Sie den Verpackungsinhalt auf sichtbare Transportschäden. ► Prüfen Sie, ob die Lieferung mit den Angaben auf dem Lieferschein übereinstimmt.
MYRICA VQ32-1 / MYRICA VQ40-2 Anschlüsse am LCD-TV 1= 2= 3= 4= 5= 6= 7= 8= 9= 10 = 11 = LINE OUT SUB LINE OUT L/R ANTENNA YUV / Y (Component Y), CVBS YUV / U (Component Pb) YUV / V (Component Pr) SCART 2 (YC, CVBS) SCART 1 (RGB, CVBS) DIG OUT VGA AUDIO IN RS-232 A26361-K1139-Z120-1-M119, Ausgabe 1 12 = 13 = 14 = 15 = 16 = 17 = 18 = 19 = 20 = 21 = HDMI 1 HDMI 2 VGA S-VIDEO Audioeingang S-VIDEO L Audioeingang S-VIDEO R Audioeingang YUV/CVBS L Audioeingang YUV/CVBS R Ein-/Ausschalter (nur MYRICA VQ40-2)
MYRICA VQ32-1 / MYRICA VQ40-2 Nachfolgend finden Sie eine Beschreibung der verschiedenen Anschlüsse: Anschluss Beschreibung LINE OUT SUB Anschluss für aktiven Subwoofer LINE OUT L/R z. B. Anschluss für Audioverstärker oder DVD-Recorder ANTENNA Anschluss TV Antennen-Signal (analoge terrestrische Antenne oder Kabelanschluss) Anschlüsse für Komponent-Eingangssignale YUV / Y (Component Y), CVBS YUV / U (Component Pb) z. B.
MYRICA VQ32-1 / MYRICA VQ40-2 Bedienelemente am LCD-TV Die Bedienelemente des LCD-TVs befinden sich an der Unterseite des Geräts. Die Funktionen der Tasten am Gerät entsprechen denen auf der Fernbedienung.
MYRICA VQ32-1 / MYRICA VQ40-2 Fernbedienung Um den LCD-TV mit der Fernbedienung steuern zu können, muss der Netzstecker eingesteckt und der Netzschalter eingeschaltet sein. Die Infrarot-Fernbedienung funktioniert nur, wenn sich kein Hindernis zwischen der Bedienung und dem Infrarot-Sensor an der Vorderseite (unten rechts) des LCD-TVs befindet. Die Reichweite der Fernbedienung beträgt ca. 6m. Wenn die Batterien schwächer werden, reduziert sich die Reichweite der Fernbedienung.
MYRICA VQ32-1 / MYRICA VQ40-2 Übersicht Fernbedienung 1 = POWER Schaltet das Gerät ein oder in den Standby-Modus 2 = TV Wechseln zum TV-Modus 3 = VIDEO Wechseln zum Video-Modus Umschalten der Video-Quellen 4 = PC Wählt den PC-Anschluss als Eingangsquelle 5 = 0 – 9 Zifferntasten TV-Modus: Kanalauswahl Videotext-Modus: Anwahl einer Videotext-Seite 6= i Zeigt die Information zur aktuellen Quelle an 7 = LIST TV-Modus: Öffnet Programm-Übersicht OSD-Menü: Auswahl von Menü-Punkten 8= PS Erhöhen der Kanal-Nummer N
MYRICA VQ32-1 / MYRICA VQ40-2 14 = XW PIP/F2) Vertauschen von Hauptbild und eingeblendetem Bild im PIP-Modus. 15 = P-POS Position des PIP-Kleinbilds verschieben 16 = P-SIZE Größe des PIP-Bilds ändern 17 = SOURCE/F4 Öffnen des Auswahl-Menüs „Eingänge“ (Quellen) 18 = HOLD/FREEZE Erzeugt von der laufenden Szene ein Standbild. Videotext-Modus: automatischen Seitenwechsel stoppen. 19 = Rot/Grün/Gelb/Blau Rot: Verlassen der Menüs.
MYRICA VQ32-1 / MYRICA VQ40-2 Fernbedienung vorbereiten ► Öffnen Sie den Batteriefachdeckel. ► Legen Sie die beiden mitgelieferten Batterien (AAA) in das Batteriefach ein. Beachten Sie die Polaritätsangaben (+) und (-) am Batteriefachboden. ► Schließen Sie den Batteriefachdeckel. Fernbedienung verwenden i Die Fernbedienung könnte nicht funktionieren, wenn der Fernbedienungssensor des LCDTVs direkter Sonnenbestrahlung oder starkem Kunstlicht ausgesetzt ist.
MYRICA VQ32-1 / MYRICA VQ40-2 LCD-TV aufstellen Vorbereitung Blickrichtung Trotz des großen Blickwinkels bietet der LCD-TV die beste Performance bei direkter senkrechter Blickrichtung. ► Richten Sie den LCD-TV auf die am häufigsten verwendete Blickrichtung aus. Aufstellungsort ! Vermeiden Sie die Aufstellung gegenüber von Fenstern oder anderen Lichtquellen, um Lichtreflextion zu vermeiden. Stellen Sie das Gerät so auf, dass Netzeingang und Netzschalter jederzeit leicht erreichbar sind.
MYRICA VQ32-1 / MYRICA VQ40-2 ► Stellen Sie den LCD-TV auf eine standfeste und waagerechte Unterlage. Der Untergrund muss fest und statisch tragfähig sein. ► Vergewissern Sie sich vor der Montage, dass der LCD-TV ausgeschaltet ist, sowie das Netzkabel und die Signalkabel ausgesteckt sind.
MYRICA VQ32-1 / MYRICA VQ40-2 ! Der LCD-TV darf nur an senkrechten Wänden montiert werden. Das Befestigungsmaterial muss für das 3 fache Gewicht des Bildschirmes ausgelegt sein. Wenden Sie sich, falls es nötig ist, an einen qualifizierten Installateur. Für die Wiedermontage des Tischfusses dürfen Sie nur das Originalbefestigungsmaterial verwenden. ► Prüfen Sie vor der Montage, ob die Tragfähigkeit der Wand für das 3fache Gewicht des LCDTVs (Gewicht siehe Kapitel “Technische Daten”) geeignet ist.
MYRICA VQ32-1 / MYRICA VQ40-2 1= Öffnungen für Befestigungshaken ► Montieren Sie 2 Befestigungshaken (1) (Dübel und Befestigungshaken gehören nicht zum Lieferumfang) waagerecht und im entsprechendem Abstand (Abstand siehe Kapitel "Bohrabmessungen") an der Wand. ► Positionieren Sie den LCD-TV so, dass die Befestigungshaken in die dafür auf der Geräterückseite vorgesehenen Öffnungen eingeführt werden können.
MYRICA VQ32-1 / MYRICA VQ40-2 Bohrabmessungen LCD TV MYRICA VQ32-1 20 - Deutsch A26361-K1139-Z120-1-M119, Ausgabe 1
MYRICA VQ32-1 / MYRICA VQ40-2 LCD TV MYRICA VQ40-1 A26361-K1139-Z120-1-M119, Ausgabe 1 Deutsch - 21
MYRICA VQ32-1 / MYRICA VQ40-2 Antenne anschließen ► Wenn Sie einen Kabelanschluss oder eine terrestrische Antenne (analog) anschließen möchten, verwenden Sie die Buchse ANTENNA. ► Stecken Sie das Netzkabel in die Netzeingangsbuchse am LCD-TV und den Netzstecker in eine Steckdose. ► Schalten Sie den Netzschalter (nur bei VQ40-2) an der Rückseite des LCD-TVs auf Position “I”. Der LCD-TV ist nun im Standby-Betrieb und kann mit der Fernbedienung eingeschaltet werden.
MYRICA VQ32-1 / MYRICA VQ40-2 Erstinstallation Nach dem ersten Einschalten des LCD-TVs müssen Sie nacheinander die Sprache und das Land einstellen. Danach beginnt die automatische Sendersuche. Sprache einstellen ► A26361-K1139-Z120-1-M119, Ausgabe 1 Wählen Sie mit der Taste S oder T Ihre Landessprache aus. Drücken Sie die MENU-Taste.
MYRICA VQ32-1 / MYRICA VQ40-2 Landesauswahl für Sortierreihenfolge 24 - Deutsch ► Wählen Sie mit der Taste S oder T aus, in welchem Land der LCD-TV betrieben wird. Die Einstellung bewirkt eine länderspezifische Sortierreihenfolge der TV Kanäle. ► Drücken Sie die MENU-Taste. Jetzt beginnt die automatische Sendersuche. ► Wenn Sie die automatische Sendersuche abbrechen möchten, drücken Sie die rote Taste.
MYRICA VQ32-1 / MYRICA VQ40-2 Bedienung Gerät ein- und ausschalten 1= 2= ► Anzeige bei Betrieb (Power On) (blau) Anzeige in Bereitschaft (Standby) (orange) IR-Sensor für Fernbedienung / Menü Zum Einschalten des LCD-TVs drücken Sie die Taste POWER/MENU an der Fernbedienung oder auf die Taste MENU am Gerät. Die Anzeige Power Ein / Standby am LCD-TV leuchtet blau. ► Zum Ausschalten des LCD-TVs drücken Sie die Taste POWER an der Fernbedienung. Die Anzeige Power Ein / Standby am LCD-TV leuchtet orange.
MYRICA VQ32-1 / MYRICA VQ40-2 Kanalwechsel (Programmwechsel) ► Wählen Sie den TV-Modus durch das Drücken der TV-Taste an der Fernbedienung. ► Drücken Sie die Taste PS zum Erhöhen der Programmnummer. ► Drücken Sie die Taste PT zum Verringern der Programmnummer. ► Wählen Sie eine Programmnummer direkt durch das Drücken der Tasten 0...9 aus. Mit der Programmübersicht im OSD-Menü. ► Drücken Sie die Taste LIST an der Fernbedienung, um die Programmübersicht am Bildschirm anzuzeigen.
MYRICA VQ32-1 / MYRICA VQ40-2 Lautstärke- und Toneinstellungen Mit den Tasten VOL S / VOL T an der Fernbedienung. Mit der Taste ► Drücken Sie die Taste VOL X zum Erhöhen der Lautstärke. ► Drücken Sie die Taste VOL W zum Vermindern der Lautstärke. an der Fernbedienung den Ton stumm schalten. ► Drücken Sie die Taste , der Ton ist stumm geschaltet. ► Drücken Sie die Taste erneut, um die Stummschaltung wieder aufzuheben. Hierzu können Sie auch die Taste VOL X benutzen.
MYRICA VQ32-1 / MYRICA VQ40-2 Geteilter Bildschirm (Split Screen) Hauptbild ► Nebenbild Drücken Sie erneut die PIP-Taste an der Fernbedienung. Die zuletzt gewählten Groß- und Kleinbilder sind nebeneinander zu sehen. ► Tauschen zwischen Haupt- und Nebenbild (Bild-im-Bild) mit Taste XW PIP oder F2 an der Fernbedienung oder unter Menüpunkt Anzeige - PIP tauschen X.
MYRICA VQ32-1 / MYRICA VQ40-2 Kombinationsmöglichkeiten Quelle mit PIP Quelle = Quelle mit PIP Quelle kombinierbar - = Quelle nicht mit PIP Quelle kombinierbar Quelle PIP Quelle Tuner SCART1 SCART2 CVBS YC YUV VGA Tuner - - - - - - - HDMI1 HDMI2 SCART1 - - - - - - - HDMI1 - - HDMI2 - - SCART2 - - - - - - - CVBS - - - - - - - YC - - - - - - - YUV - - - - - - - VGA - - - - - - - i Liegt an der gewählten PIP-Quelle keine Signal an, wird
MYRICA VQ32-1 / MYRICA VQ40-2 OSD-Menü Steuerung Nachstehend ist grundlegend die Vornahme von Einstellungen im OSD-Menü beschrieben. ► Drücken Sie die Taste MENU, um das Hauptmenü am Bildschirm anzuzeigen. ► Wählen Sie mit der Taste S oder T einen Menüpunkt aus und drücken die Taste X. ► Wiederholen Sie diesen Vorgang, bis der gewünschte Menüpunkt erreicht ist. Angewählte Menüpunkte sind mit einem blauen Balken markiert.
MYRICA VQ32-1 / MYRICA VQ40-2 ► Wählen Sie das Land mit der Taste X oder W. ► Wählen Sie Suchumfang mit mit der Taste S oder T. ► Wählen Sie den Suchumfang mit der Taste X oder W. Sie haben zwei Möglichkeiten zur Auswahl: Alle Programme und Neue Programme. ► Wählen Sie Suche starten mit der Taste S oder T an und drücken Sie die Taste X. ► Drücken Sie die MENU-Taste, um das Hauptmenü zu öffnen. ► Wählen Sie mit der Taste Soder T das Setup-Menü aus und drücken Sie die Taste X.
MYRICA VQ32-1 / MYRICA VQ40-2 Sie haben je Farbstandard drei Möglichkeiten zur Auswahl: ● bei Farbstandard PAL: B/G, D/K und I ● bei Farbstandard SECAM: B/G, D/K und L ► Wählen Sie Farb Standard mit der Taste S oder T. ► Wählen Sie einen Farbstandard (PAL oder SECAM) mit der Taste X oder W. ► Wählen Sie Decoder, siehe Kapitel "Einstellen eines Decoders". Ändern von Kanalnamen ► Wählen Sie Name mit der Taste Soder T und drücken Sie die Taste X. Die erste Zeichenposition ist angewählt.
MYRICA VQ32-1 / MYRICA VQ40-2 Sie haben die folgenden Auswahlmöglichkeiten: Decoder TV-Kanal Ton Bild Normal uncodiert uncodiert Decoder A SCART1 uncodiert codiert Decoder B SCART1 codiert codiert Decoder A SCART2 uncodiert codiert Decoder B SCART2 codiert codiert Programmübersicht bearbeiten Nachfolgend ist beschrieben, wie Sie die Reihenfolge der gespeicherten TV-Kanäle ändern oder aus der Programmübersicht löschen können. ► Drücken Sie die MENU-Taste, um das Hauptmenü zu öffnen.
MYRICA VQ32-1 / MYRICA VQ40-2 Ein Programm löschen ► Wählen Sie mit den Tasten STXW das Programm aus, das gelöscht werden soll. ► Drücken Sie die grüne Taste, um das ausgewählte Programm aus der Programmübersicht zu löschen. ► Zum Schließen des Menüs drücken Sie die rote Taste. OSD-Einstellungen ► Drücken Sie die MENU-Taste, um das Hauptmenü zu öffnen. ► Wählen Sie mit der Taste S oder T das Setup-Menü aus und drücken Sie die Taste X.
MYRICA VQ32-1 / MYRICA VQ40-2 Logoeinblendung Im Menüpunkt Logoeinblendung kann das bei beim Einschalten oder beim Fehlen des Signals angezeigte Logo aus- bzw. eingeschaltet werden. ► Wählen Sie Logoeinblendung mit der Taste S oder T. ► Wählen Sie mit der Taste W oder X Ein oder Aus. Aufruf Werkseinstellungen Sie haben die Möglichkeit alle im OSD-Menü vorgenommenen Änderungen wieder auf die ursprüngliche Werkseinstellung zurückzusetzen. ► Wählen Sie Aufruf Werkseinstellungen mit der Taste S oder T.
MYRICA VQ32-1 / MYRICA VQ40-2 Bildeinstellungen Nach der Erstinstallation bzw. nach dem Zurücksetzen auf die Werkseinstellungen sind die Werte im Menü Bild auf die Vorgabewerte eingestellt. Wie nachfolgend beschrieben können Sie diese Werte, je nach persönlichem Geschmack und Standort des LCD-TVs bzw. dem damit verbundenen Lichteinfall, individuell anpassen. Für AV-Quellen (TV, CVBS, YC, YUV, SCART1, SCART2, HDMI1, HDMI2) ► Drücken Sie die MENU-Taste, um das Hauptmenü zu öffnen.
MYRICA VQ32-1 / MYRICA VQ40-2 Schärfe ► Wählen Sie Schärfe mit der Taste S oder T. ► Drücken Sie die Taste X. Die Bildschärfe wird erhöht. Drücken Sie die Taste W. ► Die Bildschärfe wird verringert. Farbe ► Wählen Sie Farbe mit der Taste S oder T. ► Drücken Sie die Taste X. Die Farbsättigung wird erhöht. Drücken Sie die Taste W. ► Die Farbsättigung wird verringert. Farbton Farbeinstellung ist nur bei NTSC möglich. Farbbalance Wählen Sie Farbbalance mit der Taste S oder T.
MYRICA VQ32-1 / MYRICA VQ40-2 Foto CD Diese Option steht bei TV und HDMI nicht zur Verfügung. i Der Menüpunkt Foto CD ist speziell für die Wiedergabe von Standbildern z. B. von Foto-CD oder Picture-CD. ► Zum Schließen der Bildeinstellungen drücken Sie die rote Taste. Für VGA-Quellen "PC" wird in diesem Handbuch zur Kennzeichnung von Geräten mit der PCVideoschnittstelle "VGA" verstanden. i ► Drücken Sie die MENU-Taste, um das Hauptmenü zu öffnen.
MYRICA VQ32-1 / MYRICA VQ40-2 Schärfe ► Wählen Sie Schärfe mit der Taste S oder T. ► Drücken Sie die Taste X. Die Bildschärfe wird erhöht. Drücken Sie die Taste W. ► Die Bildschärfe wird verringert. Farbbalance Wählen Sie Farbbalance mit der Taste S oder T. ► Sie haben die drei Möglichkeiten zur Auswahl: Normal, Kalt und Warm. Wählen Sie die gewünschte Option mit der Taste W oder X. ► Bildanpassung Wählen Sie Bildanpassung mit der Taste S oder T.
MYRICA VQ32-1 / MYRICA VQ40-2 Bildformate für AV-Quellen (TV, CVBS, YC, SCART1, SCART2, HDMI1, HDMI2) i Für HDMI1 und 2 gelten die Bildformat-Einstellungen, wenn Overscan eingeschaltet ist. Overscan kann über Menü – Anzeige – Overscan ein- bzw. ausgeschaltet werden. Ist Overscan ausgeschaltet, sind die Bildformat-Einstellungen wie bei VGA-Quellen möglich. ► Drücken Sie die MENU-Taste, um das Hauptmenü zu öffnen. ► Wählen Sie mit der Taste S oder T das Anzeige-Menü aus und drücken Sie die Taste X.
MYRICA VQ32-1 / MYRICA VQ40-2 Panorama Diese Formateinstellung skaliert das Eingangssignal automatisch in horizontaler und vertikaler Richtung bildschirmfüllend, aber horizontal nicht linear. Das heißt, dass die Bildinhalte in der Bildschirmmitte original dargestellt werden und zum Rand hin eine stärkere Skalierung stattfindet. Bildformate für VGA-Quellen A26361-K1139-Z120-1-M119, Ausgabe 1 ► Drücken Sie die MENU-Taste, um das Hauptmenü zu öffnen.
MYRICA VQ32-1 / MYRICA VQ40-2 Bildformat Beschreibung Normal Stellt das PC-Bild bildschirmfüllend, ohne Änderung des Seitenverhältnisses, dar. Am linken und rechten Bildrand sind je nach Eingangsformat des PCBildes dunkle Streifen sichtbar. Vollbild In dieser Formateinstellung wird das Bild in horizontaler und vertikaler Richtung so angepasst, dass immer eine bildschirmfüllende Darstellung sichtbar ist. One to One Bei dieser Einstellung wird die Bildschirmpixelzahl dem Eingangssignal angepasst. D.
MYRICA VQ32-1 / MYRICA VQ40-2 Toneinstellung Beschreibung Lautstärke Anzeige der aktuell eingestellten Lautstärke. Balance Balance zwischen linken und rechten Lautsprecher. ► Drücken Sie die Taste X, um den linken Lautsprecherpegel zu verringern. ► Drücken Sie die Taste W, um den rechten Lautsprecherpegel zu verringern. Equalizer Die folgenden Möglichkeiten (Klangmuster) stehen zur Auswahl: Klassik, Flach, Jazz, Rock, Pop, Sprache; Benutzer (siehe Kapitel "Einstellung Benutzer-Equalizer").
MYRICA VQ32-1 / MYRICA VQ40-2 Einstellung Benutzer-Equalizer ► Um Einstellungen im Menü Benutzer EQ Einstellung durchzuführen, müssen Sie in Menüpunkt Equalizer die Einstellung Benutzer wählen und nach Anwahl des Menüpunktes Benutzer EQ Einstellung das Menü mit der Taste X aktivieren. Hier können Sie die Pegel für die einzelnen Frequenzen Ihren persönlichen Bedürfnissen anpassen. ► Wählen Sie mit der Taste S oder T die gewünschte Frequenz. ► Drücken Sie Taste X, um die gewählte Frequenz anzuheben.
MYRICA VQ32-1 / MYRICA VQ40-2 Videotextanzeige vergrößern ► Drücken Sie die Taste FORMAT mehrmals, um die Videotextanzeige für den oberen bzw. unteren Teil zu vergrößern. ► Durch nochmaliges Drücken kehren Sie zur Normalanzeige zurück. Verdeckte Informationen anzeigen ► Drücken Sie die Taste LIST, um verdeckte Informationen ein- bzw. auszuschalten, wie sie z. B. auf Quiz- oder Rätselseiten vorkommen.
MYRICA VQ32-1 / MYRICA VQ40-2 Anschluss externer Geräte Anschluss an SCART1/SCART2 An SCART1 und SCART2 können Sie externe Geräte wie: DVD-Player, DVD-Recorder, Videorecorder, Set Top-Boxen und Camcorder anschließen. SCART1 verfügt zusätzlich über die Möglichkeit RGB-Quellen anzuschließen. SCART2 verfügt zusätzlich über die Möglichkeit YC-Quellen anzuschließen.
MYRICA VQ32-1 / MYRICA VQ40-2 Einstellung Beschreibung TV SCART Die Funktion muss auf Ein stehen, wenn beim Einschalten eines Gerätes an SCART1 oder SCART2 automatisch auf den entsprechenden SCART-Eingang umgeschaltet werden soll. ● SCART : Liegt von einem externen Gerät eine Schaltspannung an Pin 16 an, so schaltet der LCD-TV automatisch auf das anliegende RGB-Signal um. Andernfalls wird ein CVBS-Signal wiedergegeben.
MYRICA VQ32-1 / MYRICA VQ40-2 Anschluss an den S-Video-Eingang An S-VIDEO können Sie externe Geräte, wie DVD-Player, Videorecorder und Camcorder mit einem S-Videoausgang, anschliessen. Für das Audiosignal benutzen Sie die Eingänge S-VIDEO (L/R). Anschluss an den CVBS-Eingang An CVBS können Sie externe Geräte, wie DVDPlayer, Videorecorder und Camcorder mit einem CVBS-Ausgang, anschliessen. Für das Audiosignal benutzen Sie die Eingänge YUV / CVBS (L/R).
MYRICA VQ32-1 / MYRICA VQ40-2 Anschluss an den VGA-Eingang Für den Anschluss eines Geräts mit VGASchnittstelle benutzen Sie den Eingang VGA. ► Drücken Sie die Taste SOURCE oder F4, um das Auswahlmenü zu öffnen. ► Wählen Sie mit der Taste S oder T den Eingang und drücken Sie die rote Taste (M). Oder ► Wählen Sie den VGA-Eingang mit der PCTaste. Einstellungen für VGA (RGB) A26361-K1139-Z120-1-M119, Ausgabe 1 ► Drücken Sie die MENU-Taste, um das Hauptmenü zu öffnen.
MYRICA VQ32-1 / MYRICA VQ40-2 Einstellung Beschreibung Auto. Abgleich ► Drücken Sie die Taste X, um den Auto. Abgleich zu starten. Die Funktion versucht jetzt die optimalen Bildeinstellungen für das anstehende Signal zu finden. Während der Einstellung bewegt sich das Bild leicht hin und her. H Total V Pos. Hier können Sie die Abtastfrequenz für das VGA-Bild korrigieren. Diese Funktion ist nur für fachkundige Benutzer gedacht. ► Stellen Sie mit der Taste W oder X die vertikale Bildposition ein.
MYRICA VQ32-1 / MYRICA VQ40-2 Eingänge auswählen Benutzen Sie für die Anwahl eines Einganges das Auswahlmenü Eingänge. A26361-K1139-Z120-1-M119, Ausgabe 1 ► Drücken Sie die Taste SOURCE oder F4, um das Auswahlmenü Eingänge zu öffnen. ► Wählen Sie mit der Taste S oder T den Eingang und drücken Sie die rote Taste (M).
MYRICA VQ32-1 / MYRICA VQ40-2 Fehlerbehandlung Bei Auftreten eines Fehlers überprüfen Sie zunächst die im Folgenden genannten Punkte. Falls das Fehlerbild dadurch noch nicht beseitigt wurde, sollte der LCD-TV nach Möglichkeit an einer anderen Signalquelle geprüft werden. Wenn Sie das Problem nicht lösen können, verständigen Sie unseren Help Desk.
MYRICA VQ32-1 / MYRICA VQ40-2 Die Farben sind schwach oder übermäßig Ursache Fehlerbehebung Farbe nicht richtig eingestellt. ► Stellen Sie die Farbe unter dem Menüpunkt Bild ein. Anschlusskabel nicht richtig angeschlossen. ► Schließen Sie das Anschlusskabel korrekt an. Das Bild ist abgeschnitten oder das Bild ist nicht zentriert Ursache Fehlerbehebung Bildlage nicht richtig eingestellt. ► Korrigieren Sie die Bildlage. Benutzen Sie die Auto Abgleich Funktion.
MYRICA VQ32-1 / MYRICA VQ40-2 Das dargestellte Bild ist zu dunkel Ursache Fehlerbehebung Die Bildqualität ist nicht richtig eingestellt. ► Korrigieren Sie Bildhelligkeit und Kontrast unter dem Menüpunkt Bild. Das Bild wird angezeigt, aber es ist kein Ton vorhanden Ursache Fehlerbehebung Ton ist stumm geschaltet. ► Drücken Sie die Taste auf der Fernbedienung. Lautstärke auf Minimum eingestellt. ► Erhöhen Sie die Lautstärke.
MYRICA VQ32-1 / MYRICA VQ40-2 Horizontale Streifen bei TV- oder Video-Signalen Ursache Fehlerbehebung Signalquelle vor dem Bildschirm aufgestellt. ► Platzieren Sie die Signalquellen grundsätzlich seitlich oder hinter dem Bildschirm. Schirmung der Videokabel ist nicht ausreichend. ► Verwenden Sie nur hochwertige Signalkabel mit hoher Schirmdämpfung.
MYRICA VQ32-1 / MYRICA VQ40-2 Technische Daten Bildschirm MYRICA VQ32-1 Bildschirm Diagonale 81 cm (32") Bildformat 16:9 Darstellbare Bildgröße 697 mm (horizontal) x 392 mm (vertikal) Auflösung 1366 x 768 Bildpunkte Farbdarstellung 16,7 Mio.
MYRICA VQ32-1 / MYRICA VQ40-2 Eingänge/Ausgänge/Synchronisation PC/Video-Eingang RGB analog und automatische Sync-Erkennung Video-Anschlüsse TV Tuner: IEC, 75 Ohm Eingangswiderstand SCART 1: RGB, FBAS Eingang, FBAS Ausgang SCART 2: YC, FBAS Eingang, FBAS Ausgang Y/C: MiniDIN (HOSIDEN) YUV (FBAS): 3 x Cinch (HDTV) FBAS: 1 x Cinch (Y) HDMI1 / 2: digital Video/Audio (HDTV) - HDCP PC-Anschluss analog/digital VGA: analog RGB Audio-Anschlüsse Integrierte Lautsprecher: 4 x Breitband Stereo-
MYRICA VQ32-1 / MYRICA VQ40-2 Bildschirm MYRICA VQ40-2 Bildschirm Größe / diagonal 101 cm (40”) Bildformat 16:9 Darstellbare Bildgröße 885 mm (horizontal) x 497 mm (vertikal) Auflösung 1366 x 768 Bildpunkte Farbdarstellung 16,7 Mio.
MYRICA VQ32-1 / MYRICA VQ40-2 SCART 2: YC, FBAS Eingang, FBAS Ausgang Y/C: MiniDIN (HOSIDEN) YUV (FBAS): 3 x Cinch (HDTV) FBAS: 1 x Cinch (Y) HDMI1 / 2: digital Video/Audio (HDTV) - HDCP PC-Anschluss analog/digital VGA: analog RGB Audio-Anschlüsse Integrierte Lautsprecher: 4 x Breitband Stereo-Eingang: 3 x 2 Cinch L/R 1VRMS (YUV/FBAS), YC, PC/VGA Stereo-Ausgang: 2 x Cinch (LINE OUT L/R) Aktiver Subwoofer: 1 x Cinch (LINE OUT SUB) Digitaler Audioausgang: 1 x Cinch (DIG OUT) Ausgangsl
MYRICA VQ32-1 / MYRICA VQ40-2 60 - Deutsch A26361-K1139-Z120-1-M119, Ausgabe 1
Contents Introduction......................................................................................................................................... 1 Notational conventions ......................................................................................................................... 2 Important notes .................................................................................................................................. 3 Safety information.....................................
Contents Picture formats for AV sources (TV, CVBS, YC, SCART1, SCART2, HDMI1, HDMI2) .............40 Picture formats for VGA Sources................................................................................................41 Advanced sound settings ....................................................................................................................42 User Settings - Equalizer ............................................................................................................
Introduction In this manual you will find important information on how to operate your TV set. The LCD TGV offers a range of ways of connecting DVD players, video recorders, video cameras, etc. It does not matter if they are TV or video pictures, they will all be shown with crisp sharpness and free of distortion on the absolutely flat panel surface. The outstanding features of the pictures are the excellent brightness and extraordinary brilliance.
MYRICA VQ32-1 / MYRICA VQ40-2 Notational conventions The following notational conventions are used in this manual: ! i this describes important information. Failure to follow this information could result in personal injury, damage to the TV unit or loss of data. Any damage or defects caused to your TV unit because of failure to follow the instructions will invalidate the warranty. indicates important information which is required to use the system properly.
MYRICA VQ32-1 / MYRICA VQ40-2 Important notes Here you will find essential safety information that you must be aware of when using your TV set. ! i i Do not allow still images to be displayed for an extended time, e.g. still images from videos, station label etc. (maximum of 1 hour). These pictures may remain visible! Also, do not allow prolonged operation in a picture mode in which black bars are visible (i.e. operation in 4:3 picture aspect). These black bars can also remain visible.
MYRICA VQ32-1 / MYRICA VQ40-2 ● Never place any containers which are filled with liquid (e.g. vases) on the device. The device is not waterproof! Protect the device from splashing water (rain, sea water). ● In emergencies (e.g. damaged casing, elements or cables, penetration of liquids or foreign matter), switch off the unit, disconnect the power plug and contact your sales outlet or our help desk. ● The device must be disposed of in accordance with the local regulations for disposal of special waste.
MYRICA VQ32-1 / MYRICA VQ40-2 To avoid eye pains and maintain the optimum viewing distance, the distance from the set should be five to six times the screen diagonal. There should be enough light in your television room to allow you to read. If the brightness is too high, the contrasts are lost. Too little light is bad for the eyes due to the light-dark transition on the screen.
MYRICA VQ32-1 / MYRICA VQ40-2 Cleaning Before you start to clean the set, switch it off and pull the mains plug from the socket. Cleaning the screen ● Use a mild cleaning agent together with a soft cloth to clean the screen. ● The cleaning agent must not contain any ketones (e.g. acetone) or ethyl alcohols. ● Do not use abrasive cleaners! Cleaning the casing ● Do not use any chemical solutions and cleaning agents to clean the casing since they may damage the flat panel.
MYRICA VQ32-1 / MYRICA VQ40-2 If faults occur Pull the mains adapter from the socket if the set has been damaged. Pull the mains adapter from the socket immediately if smoke, an unpleasant smell or unusual noises are coming from the set. Do the same if the set cannot display a picture after being switched or when switched on. Do not try to continue using the screen in this condition. Do not open the set yourself under any circumstances. This set does not contain any user serviceable or replaceable parts.
MYRICA VQ32-1 / MYRICA VQ40-2 Checking the contents of the consignment The TV set's flat panel is sensitive to pressure and scratches. Always hold the device by the casing! ! ► Unpack all the individual parts. ► Check the contents of the package for any visible damage caused during transport. ► Check that the consignment conforms to the details on the delivery note.
MYRICA VQ32-1 / MYRICA VQ40-2 Connections on the LCD TV 1= 2= 3= 4= 5= 6= 7= 8= 9= 10 = 11 = LINE OUT SUB LINE OUT L/R ANTENNA YUV / Y (Component Y), CVBS YUV / U (Component Pb) YUV / V (Component Pr) SCART 2 (YC, CVBS) SCART 1 (RGB, CVBS) DIG OUT VGA AUDIO IN RS-232 A26361-K1139-Z120-1-M119, Edition 1 12 = 13 = 14 = 15 = 16 = 17 = 18 = 19 = 20 = 21 = HDMI 1 HDMI 2 VGA S-VIDEO S-VIDEO L audio input S-VIDEO R audio input YUV/CVBS L audio input YUV/CVBS R audio input On/Off switch (MYRICA VQ40-2 only) C
MYRICA VQ32-1 / MYRICA VQ40-2 The various connectors are described below: Connection Description LINE OUT SUB Connection for active subwoofer LINE OUT L/R e.g. connection for audio amplifier or DVD recorder ANTENNA Connection for TV antenna signal (analogue terrestrial antenna or cable connection) Connections for component input signals YUV/Y (Component Y), CVBS YUV/U (Component Pb) e.g.
MYRICA VQ32-1 / MYRICA VQ40-2 Operating controls on the LCD TV The operating controls of the LCD TV are located on the lower right side of the set. The key functions on the set are the same as those on the remote control.
MYRICA VQ32-1 / MYRICA VQ40-2 Remote control To control the LCD TV with the remote control the mains adapter must be plugged in and the mains switch switched on. The infrared remote control works only if there is no obstacle between the remote control and the IR sensor on the front of the LCD TV (bottom right). The remote control has a range of about 6 m. When the batteries get weaker, the range of the remote control decreases. Please change the batteries if this happens. Only use 1.5 V LRO3 AAA batteries.
MYRICA VQ32-1 / MYRICA VQ40-2 Overview of remote control functions 1 = POWER Switches the device on or into standby mode.
MYRICA VQ32-1 / MYRICA VQ40-2 14 = XW PIP/F2) Swap between main picture and superimposed picture in PIP mode. 15 = P-POS Shift position of the picture in picture (PIP) 16 = P-SIZE Change size of PIP 17 = SOURCE/F4 Open the "Inputs" selection menu (sources) 18 = HOLD/FREEZE Freezes a picture in the current programme. Teletext mode: automatic page change stop. 19 = Red/Green/Yellow/Blue Red: exit menus.
MYRICA VQ32-1 / MYRICA VQ40-2 Preparing the remote control ► Open the battery compartment lid. ► Place the two batteries supplied (AAA) in the battery compartment. Match polarity symbols (+) and (-) on batteries with those on bottom of battery compartment ► Close the battery compartment lid. Using the remote control i The remote control might not work if the LCD TV's remote control sensor is exposed to direct sunshine or strong artificial light.
MYRICA VQ32-1 / MYRICA VQ40-2 Setting up the LCD TV Preparation Viewing direction Despite the large viewing angle, the LCD TV offers the best performance when viewed from a direct vertical direction. ► Align the LCD TV with the most frequently used viewing direction. Installation site ! Do not install the set opposite windows or other light sources to avoid light reflection. Install the set in such a way that the mains input and mains switch are easily accessible at all times.
MYRICA VQ32-1 / MYRICA VQ40-2 ► Place the LCD TV on a stable and horizontal surface. The surface must be stable and able to carry static loads. ► Make sure before installing the set that the LCD TV is switched off and mains cable and signal cable have been disconnected.
MYRICA VQ32-1 / MYRICA VQ40-2 ! The LCD TV must be mounted only on verticall walls. The fastening material must be designed to take three times the weight of the flat panel TV. Call in a qualified installer if required. To refit the stand you must use only the original fastening material. ► Check before mounting that the wall can accept a weight three times that of the LCD flat panel (for weight see chapter “Technical data”). Consult a qualified installer if in doubt.
MYRICA VQ32-1 / MYRICA VQ40-2 1= openings for fastening hooks ► Fit the 2 fastening hooks (1) (rawl plugs and fastening hook are not included in the supplied accessories) horizontally and at a suitable distance (for distance see chapter "Hole dimensions") on the wall. ► Position the LCD TV so that the fastening hooks can be inserted into the openings provided for them on the rear of the set.
MYRICA VQ32-1 / MYRICA VQ40-2 Hole dimensions LCD TV MYRICA VQ32-1 20 - English A26361-K1139-Z120-1-M119, Edition 1
MYRICA VQ32-1 / MYRICA VQ40-2 LCD TV MYRICA VQ40-1 A26361-K1139-Z120-1-M119, Edition 1 English - 21
MYRICA VQ32-1 / MYRICA VQ40-2 Connecting the antenna ► If you would like to connect a cable connection or a terrestrial antenna (analogue) use the ANTENNA socket. Connecting the mains cable 22 - English ► Plug the mains cable into the mains input socket on the LCD TV and and mains adapter into a socket. ► Switch the mains switch (on the VQ40-2 only) on the back of the LCD TV to position "I". The LCD TV is now in standby mode and can be switched in with the remote control.
MYRICA VQ32-1 / MYRICA VQ40-2 First-time installation After switching the LCD TV on for the first time you need first to set the language followed by the country. Automatic tuning will not start until you have done this. Setting the language ► A26361-K1139-Z120-1-M119, Edition 1 With the button S or T choose your language. Press the MENU button.
MYRICA VQ32-1 / MYRICA VQ40-2 Country selection for sorting sequence 24 - English ► With the button S or T select the country in which the LCD TV is to be operated. This setting sorts the TV channels into a sequence specific to the various countries. ► Press the MENU button. Automatic tuning starts now. ► If you would like to interrupt automatic tuning, press the red button. ► If no TV channel is found, check the antenna connections and try tuning again.
MYRICA VQ32-1 / MYRICA VQ40-2 Operation Switching the set on and off 1= 2= ► Display during operation (Power On) (blue) Display in standby mode (Standby) (orange) IR sensor for remote control / Menu To switch the LCD TV on press the POWER/MENU button on the remote control or the MENU button on the set. The blue Power on / Standby indicator on the LCD TV lights up. ► To switch the LCD TV off press the POWER button on the remote control. The orange Power on / Standby indicator on the LCD TV lights up.
MYRICA VQ32-1 / MYRICA VQ40-2 Changing channel (changing programme) ► Choose TV mode by pressing the TV button on the remote control. ► Press the P button S to go up one programme. ► Press the P button T to go down one programme. ► Select a programme number directly by pressing buttons 0...9. With the programme guide in the OSD menu. ► Press the LIST button on the remote control to display the programme guide on screen. ► Select a programme with the buttons ST XW on the remote control.
MYRICA VQ32-1 / MYRICA VQ40-2 Volume and sound settings With the VOL S / VOL T buttons on the remote control. Mute the sound with the ► Press the VOL button X to increase the volume. ► Press the VOL button W to decrease the volume. button on the remote control. ► Press the button and the sound is muted. ► Press the button again to cancel muting. You can also use the VOL X button to do this.
MYRICA VQ32-1 / MYRICA VQ40-2 Split Screen Main picture ► Secondary picture Press the PIP button on the remote control again. The main and PIP pictures last selected are shown side by side. ► Swapping between main and subsidary picture (PIP) with the XW PIP or F2 button on the remote control or under menu option Display - Swap PIP X. ► To terminate the PIP function press the PIP button on the remote control once or twice or set Display - Layout Single from the menu option.
MYRICA VQ32-1 / MYRICA VQ40-2 Possible combinations of source with PIP source = source can be combined with PIP source - = source cannot be combined with PIP source Source PIP Source Tuner SCART1 SCART2 CVBS YC YUV VGA Tuner - - - - - - - HDMI1 HDMI2 SCART1 - - - - - - - HDMI1 - - HDMI2 - - SCART2 - - - - - - - CVBS - - - - - - - YC - - - - - - - YUV - - - - - - - VGA - - - - - - - If no signal is present at the chosen PIP source, the
MYRICA VQ32-1 / MYRICA VQ40-2 OSD Menu Control The process for making settings in the OSD Menu is described below. ► Press the MENU button to display the Main Menu on the screen. ► With the S or T button choose a menu option and press the X button. ► Repeat this process until the desired menu option is reached. Selected menu options are highlighted with a blue bar. Menu options with another sub-menu or that can be executed directly are indicated with X .
MYRICA VQ32-1 / MYRICA VQ40-2 ► Select the country with the X or Wbutton. ► Select Tuning range with the S or Tbutton. ► Choose the tuning range with the button X or W. You have two ways of doing this: all programmes and new programmes. ► Choose Start tuning with the S or T button and press the X button. ► Press the MENU button to open the Main Menu. ► With the S or Tbutton choose the Setupmenu and press the Xbutton. ► Choose Tuner with the S or T button and press the X button.
MYRICA VQ32-1 / MYRICA VQ40-2 You have three possible choices for each colour standard: ● for PAL: B/G, D/K and I ● for SECAM: B/G, D/K and L ► Choose Colour Standard with the Sor T button. ► Choose a colour standard (PAL or SECAM) with the X or Wbutton. ► To choose Decoder, see Chapter "Setting a decoder". Changing channel names ► Choose Name with the Sor T button and press the Xbutton. The first character position is selected. ► With the S or T button choose a character.
MYRICA VQ32-1 / MYRICA VQ40-2 You have the following selections: Decoder TV channel Sound Picture Normal unencoded unencoded Decoder A SCART1 unencoded encoded Decoder B SCART1 encoded encoded Decoder A SCART2 unencoded encoded Decoder B SCART2 encoded encoded Editing the programme guide The way to change the order of the stored TV channels or to delete them from the programme guide is described below. ► Press the MENU button to open the Main Menu.
MYRICA VQ32-1 / MYRICA VQ40-2 Deleting a programme ► With the STXWbuttons select the programme that is to be deleted. ► Press the green button to delete the selected programme from the programme guide. ► Press the red button to close the menu. OSD Settings ► Press the MENU button to open the Main Menu. ► With the S or Tbutton choose the Setupmenu and press the Xbutton. ► Choose OSD with the Sor Tbutton and press the X button.
MYRICA VQ32-1 / MYRICA VQ40-2 Logo fade-in In the Logo fade-in menu option the logo displayed when the set is switched on, or there is no signal, can be switched on or off. ► Select Logo fade-in with the S or Tbutton. ► With the W or X button choose On or Off. Calling up factory settings You have the facility to reset all changes made in the OSD menu to the original factory setting. ► Select Calling up factory settings with the S or Tbutton. ► Press the X button to restore the factory settings.
MYRICA VQ32-1 / MYRICA VQ40-2 Picture settings After initial installation or after restoring the factory settings, the values in the Picture menu are set to the standard values. Below are instructions on how you can customise these values to satisfy your own taste and location of the LCD TV and the incident light due to its location. For AV sources (TV, CVBS, YC, YUV, SCART1, SCART2, HDMI1, HDMI2) ► Press the MENU button to open the Main Menu.
MYRICA VQ32-1 / MYRICA VQ40-2 Sharpness ► Select Sharpness with the S or Tbutton. ► Press the Xbutton. The sharpness is increased. Press the Wbutton. ► The sharpness is reduced. Colour ► Select Colour with the S or Tbutton. ► Press the Xbutton. The colour saturation is increased. Press the Wbutton. ► The colour saturation is reduced. Tint Colour setting is possible only with NTSC. Colour balance Select Colour balance with the S or Tbutton. ► You have three choices: normal, cool and warm.
MYRICA VQ32-1 / MYRICA VQ40-2 Photo CD This option is not available for TV and HDMI. i The menu option Photo CD is specifically there to play back stills from Photo CD or Picture CD for instance. ► Press the red button to close the picture settings menu. For VGA Sources In this manual "PC" is used to identify sets with the "VGA" PC video interface. i ► Press the MENU button to open the Main Menu. ► With the S or Tbutton choose the Picturemenu and press the Xbutton.
MYRICA VQ32-1 / MYRICA VQ40-2 Sharpness ► Select Sharpness with the S or Tbutton. ► Press the Xbutton. The sharpness is increased. Press the Wbutton. ► The sharpness is reduced. Colour balance Select Colour balance with the S or Tbutton. ► You have three choices: normal, cool and warm. Select the desired option with the W or X button. ► Picture adjustment Select Picture adjustment with the S or Tbutton. ► You have three choices: normal, bright and dark.
MYRICA VQ32-1 / MYRICA VQ40-2 Picture formats for AV sources (TV, CVBS, YC, SCART1, SCART2, HDMI1, HDMI2) i The picture format settings in place when Overscan is switched on apply to HDMI1 and 2. Overscan can be switched on or off via Menu – Display– Overscan. If Overscan is switched off, the picture format settings available for VGA sources are available here too. ► Press the MENU button to open the Main Menu. ► With the S or Tbutton choose the Displaymenu and press the Xbutton.
MYRICA VQ32-1 / MYRICA VQ40-2 Aspect Description Panoramic This setting scales the input signal automatically both horizontally and vertically to fill the screen, but without any stretching. This means that the picture contents are displayed in the middle of the screen, with greater scaling taking place around the edges. Picture formats for VGA Sources ► Press the MENU button to open the Main Menu. ► With the S or Tbutton choose the Displaymenu and press the Xbutton.
MYRICA VQ32-1 / MYRICA VQ40-2 Advanced sound settings ► Press the MENU button to open the Main Menu. ► With the S or Tbutton choose the Soundmenu and press the Xbutton. ► With the S or T button choose the desired option and press the Xbutton. ► Choose the desired setting for the option with the W or X button. Sound setting Description Volume Displays the current volume setting. Balance Balance between left and right loudspeaker.
MYRICA VQ32-1 / MYRICA VQ40-2 Sound setting Description Input Level The audio input level for all sources, apart from the tuner, can be turned up or down. User EQ settings For individual sound setting with the help of the Equalizer. Refer to chapter "User Settings - Equalizer".
MYRICA VQ32-1 / MYRICA VQ40-2 The subpage numbers, if available, are displayed at the top in the status line next to the chosen page number. ► Press the ZAP button to switch to the direct selection mode for subpages. ► Select the desired subpage using the numeric buttons from 0 to 9. Enlarging the teletext display ► Press the FORMAT button several times to enlarge the teletext display for the top or bottom section. ► By pressing the button repeatedly again you come back to the normal display.
MYRICA VQ32-1 / MYRICA VQ40-2 Connecting external devices Connecting to SCART1/SCART2 You can connect the following external devices to SCART1 and SCART2: DVD players, DVD recorders, video recorders, set-top boxes and camcorders. It is also possible to connect RGB sources to SCART1. It is also possible to connect YC sources to SCART2. If you have chosen the SCART1 or SCART2 input with the VIDEO button, you can input the settings described below: ► Press the MENU button to open the Main Menu.
MYRICA VQ32-1 / MYRICA VQ40-2 Setting Description TV SCART This function must be On if the corresponding SCART input is to be automatically selected from SCART1 or SCART2 when a device is switched on. ● SCART: if a switching voltage from an external device is present at Pin 16, then the LCD TV automatically switches over to the adjacent RGB signal. Otherwise a CVBS signal is received.
MYRICA VQ32-1 / MYRICA VQ40-2 Connecting to the S-Video Input You can connect external devices like DVD players, video recorders and camcorders with an S-video output to the S-video port. Use the S-video (L/R) inputs for the audio signal. Connecting to the CVBS Input You can connect external devices like DVD players, video recorders and camcorders with a CVBS output to the CVBS port. Use the YUV / CVBS (L/R) inputs for the audio signal.
MYRICA VQ32-1 / MYRICA VQ40-2 Connecting to the VGA Input Use the VGA input to connect a device with a VGA port. ► Press the SOURCE button or F4 to open the selection menu. ► With the Sor T button choose the input input and press the red button (M). Or ► Choose the VGA input with the PC button. ► Press the MENU button to open the Main Menu. ► With the S or Tbutton choose the Setupmenu and press the Xbutton. ► Choose SInputsT with the or button and press the X button.
MYRICA VQ32-1 / MYRICA VQ40-2 Selecting inputs Use Inputs from the selection menu to choose an input. A26361-K1139-Z120-1-M119, Edition 1 ► Press the SOURCE button or F4 to open the Inputs selection menu. ► With the Sor T button choose the input input and press the red button (M).
MYRICA VQ32-1 / MYRICA VQ40-2 Troubleshooting Should an error occur, first check the following points. If the picture fault has not been solved, then the LCD-TV should be checked using another signal source if possible. Please contact our help desk if you are unable to solve the problem. ! If the tips given on troubleshooting have not worked, switch the set off at the mains and pull the plug from the socket.
MYRICA VQ32-1 / MYRICA VQ40-2 Colours are too weak or too strong Cause Troubleshooting Colour not set properly. ► Set the colour using the Picture menu option. The connecting cable is not connected correctly. ► Connect the connecting cable correctly. The picture is cut off or not centered Cause Troubleshooting Picture position not set properly. ► Correct the picture position. Use the Auto Calibration function.
MYRICA VQ32-1 / MYRICA VQ40-2 The displayed picture is too dark. Cause Troubleshooting The picture quality has not been set correctly ► Correct the picture brightness and contrast using the Picture menu option. The picture is displayed, but there is no sound. Cause Troubleshooting Sound has been muted. ► Press the Volume set to minimum. ► Increase the volume. button on the remote control.
MYRICA VQ32-1 / MYRICA VQ40-2 Technical data MYRICA VQ32-1 flat panel Screen Diagonal 81 cm (32") Aspect 16:9 Viewable picture size 697 mm (horizontal) x 392 mm (vertical) Screen resolution 1366 x 768 pixels Colour display 16.
MYRICA VQ32-1 / MYRICA VQ40-2 Input/outputs/synchronisation PC/Video input RGB analogue and automatic synchronisation recognition Video connections: TV tuner: IEC, 75 Ohm input resistance SCART 1: RGB, FBAS input, FBAS output SCART 2: YC, FBAS input, FBAS output Y/C: MiniDIN (HOSIDEN) YUV (FBAS): 3 x Cinch (HDTV) FBAS: 1 x Cinch (Y) HDMI1 / 2: Digital video/audio (HDTV) - HDCP Analogue/digital PC connection VGA: Analogue RGB Audio ports Built-in loudspeakers: 4 x broadband Stereo inp
MYRICA VQ32-1 / MYRICA VQ40-2 MYRICA VQ40-2 flat panel Screen Size / diagonal 101 cm (40”) Aspect 16:9 Viewable picture size 885 mm (horizontal) x 497 mm (vertical) Screen resolution 1366 x 768 pixels Colour display 16.
MYRICA VQ32-1 / MYRICA VQ40-2 SCART 2: YC, FBAS input, FBAS output Y/C: MiniDIN (HOSIDEN) YUV (FBAS): 3 x Cinch (HDTV) FBAS: 1 x Cinch (Y) HDMI1 / 2: Digital video/audio (HDTV) - HDCP Analogue/digital PC connection VGA: Analogue RGB Audio ports Built-in loudspeakers: 4 x broadband Stereo input: 3 x 2 Cinch L/R 1VRMS (YUV/FBAS), YC, PC/VGA 2 x SCART 1VRMS Stereo output: 2 x Cinch (LINE OUT L/R) Active subwoofer: 1 x Cinch (LINE OUT SUB) Digital audio output: 1 x Cinch (DIG OUT) Ampli
Sommaire Introduction......................................................................................................................................... 1 Symboles.............................................................................................................................................. 2 Remarques importantes .................................................................................................................... 3 Consignes de sécurité ...................................
Sommaire Formats d'image pour les sources AV (TV, CVBS, YC, SCART1, SCART2, HDMI1, HDMI2)................................................................................................................................40 Formats d'image pour sources VGA...........................................................................................41 Réglages de tonalité étendus .............................................................................................................
Introduction Ce manuel contient des informations importantes, nécessaires à la mise en service de votre téléviseur. Le téléviseur LCD offre de multiples possibilités pour raccorder des lecteurs DVD, des magnétoscospes, des caméscopes, etc. La surface parfaitement plate de l'écran offre un affichage net et sans déformation, qu'il s'agisse d'images télévisées ou vidéo. Vous profiterez donc d'images d'une luminosité exceptionnelle et d'une brillance extraordinaire.
MYRICA VQ32-1 / MYRICA VQ40-2 Symboles Vous rencontrerez dans ce manuel les symboles suivants : ! i signale des instructions à respecter impérativement pour votre propre sécurité, celle de votre téléviseur et celle de vos données. La garantie s’éteint dès l’instant où vous endommagez le téléviseur en ne respectant pas ces consignes. signale des informations importantes pour l’utilisation correcte du système. ► signale une opération que vous devez exécuter.
MYRICA VQ32-1 / MYRICA VQ40-2 Remarques importantes Ce chapitre contient des consignes de sécurité que vous devez absolument observer en utilisant votre téléviseur. ! i i Evitez l'affichage d'images fixes pendant une longue période, p. ex. des arrêts sur image des vidéos, mires ou similaires (maximum 1 heure).
MYRICA VQ32-1 / MYRICA VQ40-2 ● Par temps d'orage, le branchement ou débranchement de l’antenne ou des câbles de données doit être évité. ● Veillez à ce que ni objets (p. ex. bracelets, trombones, etc.) ni liquides ne s'introduisent à l'intérieur de l'appareil (risque d'électrocution, court-circuit). ● Ne posez jamais sur l’appareil des objets contenant des liquides, p. ex. des vases. L'appareil n'est pas imperméable ! Protégez l'appareil contre les éclaboussures (pluie, eau de mer).
MYRICA VQ32-1 / MYRICA VQ40-2 Des conditions inadéquates peuvent provoquer une ondulation secteur de votre téléviseur LCD. En général, l'ondulation secteur provient de l'alimentation de secteur et peut survenir suite à la connexion de différents conducteurs de protection. Pour remédier à cela, vous pouvez monter sur l'écran un filtre de courant sur gaine entre la descente d'antenne d'arrivée et l'entrée d'antenne.
MYRICA VQ32-1 / MYRICA VQ40-2 Nettoyage Avant de procéder au nettoyage du téléviseur, éteignez-le et retirez la fiche secteur de la prise. Nettoyage de l'écran ● Pour nettoyer l'écran, utilisez un produit nettoyant neutre et un chiffon doux. ● Le produit nettoyant doit être exempt d'acétone et d'alcool éthylique.
MYRICA VQ32-1 / MYRICA VQ40-2 En cas de pannes Si l'appareil est endommagé, retirez la fiche secteur de la prise. Si l'appareil produit de la fumée, une odeur désagréable ou des bruits inhabituels, retirez immédiatement la fiche secteur de la prise. Procédez de la même manière si, après la mise en marche ou pendant le fonctionnement, l'appareil n'affiche plus d'image. Dans ce cas, n'essayez plus de faire fonctionner l'écran. N'ouvrez dans aucun cas l'appareil.
MYRICA VQ32-1 / MYRICA VQ40-2 Vérification de la livraison La surface de l'écran du téléviseur est sensible aux pressions et aux griffures. Veuillez saisir l'appareil uniquement par le boîtier. ! ► Déballez les différents éléments. ► Vérifiez si le contenu de l'emballage présente des dommages apparents dus au transport. ► Vérifiez si la livraison correspond aux données reprises sur le bon de livraison.
MYRICA VQ32-1 / MYRICA VQ40-2 Prises du téléviseur LCD 1= 2= 3= 4= 5= 6= 7= 8= 9= 10 = 11 = LINE OUT SUB LINE OUT L/R ANTENNA YUV / Y (Component Y), CVBS YUV / U (Component Pb) YUV / V (Component Pr) SCART 2 (YC, CVBS) SCART 1 (RGB, CVBS) DIG OUT VGA AUDIO IN RS-232 A26361-K1139-Z120-1-M119, édition 1 12 = 13 = 14 = 15 = 16 = 17 = 18 = 19 = 20 = HDMI 1 HDMI 2 VGA S-VIDEO Entrée audio S-VIDEO L Entrée audio S-VIDEO R Entrée audio YUV/CVBS L Entrée audio YUV/CVBS R Interrupteur Marche/Arrêt (MYRICA VQ40
MYRICA VQ32-1 / MYRICA VQ40-2 Vous trouverez ci-après une description des différentes prises : Prise Description LINE OUT SUB Port pour caisson de basses actif LINE OUT L/R p. ex. Port pour amplificateur audio ou enregistreur DVD ANTENNA Port pour signal d'antenne TV (connecteur de câble ou antenne terrestre analogique) Ports pour les signaux d'entrée Composant YUV / Y (Component Y), CVBS YUV / U (Component Pb) p. ex.
MYRICA VQ32-1 / MYRICA VQ40-2 Eléments de commande du téléviseur LCD Les éléments de commande du téléviseur LCD sont situés sur la face inférieure de l'appareil. Les fonctions des touches sur l'appareil correspondent à celles de la télécommande.
MYRICA VQ32-1 / MYRICA VQ40-2 Télécommande Afin de pouvoir commander le téléviseur LCD avec la télécommande, la fiche secteur doit être insérée et l'interrupteur d'alimentation doit être sous tension. La télécommande à infrarouge fonctionne uniquement si aucun objet n'entrave la communication entre la télécommande et le capteur infrarouge sur la face avant (en bas à droite) du téléviseur LCD. La portée de la télécommande est d'environ 6 m.
MYRICA VQ32-1 / MYRICA VQ40-2 Aperçu de la télécommande 1 = POWER Met l'appareil en marche ou en mode veille (standby).
MYRICA VQ32-1 / MYRICA VQ40-2 13 = PIP Active le mode PIP Commutation des formats PIP (PIP/ISplit Screen) 14 = XW PIP/F2) Inversion de l'image pricipale et de l’image incrustée en mode PIP. 15 = P-POS Pour modifier la position de la petite image PIP 16 = P-SIZE Pour modifier la taille de l'image PIP 17 = SOURCE/F4 Affichage du menu de sélection "Entrées" (sources) 18 = HOLD/FREEZE Créé une image fixe à partir de la scène en cours. Mode vidéotexte : pour arrêter le défilement automatique des pages.
MYRICA VQ32-1 / MYRICA VQ40-2 Préparation de la télécommande ► Ouvrez le couvercle du logement des piles. ► Placez les deux piles fournies (AAA) dans le logement. Respectez les marquages (+) et (-) indiquant la polarité sur le fond du logement. ► Refermez le couvercle du logement des piles. Utilisation de la télécommande i La télécommande ne fonctionne pas si le capteur de télécommande du téléviseur LCD est exposé aux rayons directs du soleil ou à un éclairage artificiel trop intense.
MYRICA VQ32-1 / MYRICA VQ40-2 Installation du téléviseur LCD Préparation Angle de vision Malgré son angle de vision large, le téléviseur LCD offre les meilleures performances dans l'angle de vision vertical. ► Réglez l'angle du téléviseur LCD dans la position d'utilisation la plus fréquente. Emplacement ! Ne placez pas le téléviseur LCD à l'opposé des fenêtres ou d'autres sources lumineuses afin d'éviter toute réflexion lumineuse.
MYRICA VQ32-1 / MYRICA VQ40-2 ► Placez le téléviseur LCD sur une surface stable et horizontale. La surface d'appui doit être suffisamment solide et immobile. ► Avant le montage, assurez-vous que le téléviseur LCD est hors tension et que le câble secteur ainsi que le câble de signal ne sont pas branchés.
MYRICA VQ32-1 / MYRICA VQ40-2 ! Le téléviseur LCD ne doit être monté que sur des murs verticaux. Le matériel de fixation doit être conçus pour supporter 3 fois le poids de l'écran. Le cas échéant, contactez un installateur qualifié. Pour le remontage du pied de table, utilisez uniquement le matériel de fixation d'origine. ► Avant le montage, contrôlez si la capacité portante du mur correspond à trois fois le poids du téléviseur LCD (pour le poids, voir le chapitre "Caractéristiques techniques").
MYRICA VQ32-1 / MYRICA VQ40-2 1= Ouvertures pour les crochets de fixation ► Montez sur le mur 2 crochets de fixation (1) (chevilles et crochets de fixation ne sont pas compris dans le lot de livraison) à l'horizontale et à la distance adéquate (pour la distance, voir le chapitre "Mesures de perçage"). ► Positionnez le téléviseur LCD de sorte que les crochets de fixation puissent être insérés dans les ouvertures prévues à cet effet sur la face arrière de l'appareil.
MYRICA VQ32-1 / MYRICA VQ40-2 Mesures de perçage LCD TV MYRICA VQ32-1 20 - Français A26361-K1139-Z120-1-M119, édition 1
MYRICA VQ32-1 / MYRICA VQ40-2 LCD TV MYRICA VQ40-1 A26361-K1139-Z120-1-M119, édition 1 Français - 21
MYRICA VQ32-1 / MYRICA VQ40-2 Brancher une antenne ► Si vous souhaitez brancher un connecteur de câble ou une antenne terrestre (analogique), utilisez la prise ANTENNA. ► Insérez le câble secteur dans la prise d'entrée secteur sur le téléviseur LCD et la fiche secteur dans une prise. ► Commutez l'interrupteur d'alimentation (VQ40-2 uniquement) au dos du téléviseur LCD en position "I". Le téléviseur LCD est alors en mode standby et vous pouvez l'allumer avec la télécommande.
MYRICA VQ32-1 / MYRICA VQ40-2 Première installation Après avoir allumé le téléviseur LCD pour la première fois, vous devez régler la langue et le pays. Ensuite, la recherche automatique des émetteurs débute. Réglage de la langue ► A26361-K1139-Z120-1-M119, édition 1 Avec la touche S ou T, sélectionnez la langue de votre pays. Appuyez sur la touche MENU.
MYRICA VQ32-1 / MYRICA VQ40-2 Sélection du pays pour la séquence de classification 24 - Français ► Avec la touche S ou T, sélectionnez le pays d'utilisation du téléviseur LCD. Ce réglage entraîne une séquence de classification des canaux TV du pays. ► Appuyez sur la touche MENU. La recherche automatique des émetteurs débute. ► Si vous souhaitez interrompre la recherche automatique des émetteurs, appuyez sur la touche rouge.
MYRICA VQ32-1 / MYRICA VQ40-2 Commande Allumer et éteindre l'appareil 1= 2= ► Témoin Marche (Power On) (bleu) Témoin Veille (Standby) (orange) Capteur IR pour télécommande / Menü Pour allumer le téléviseur LCD, appuyez sur la touche POWER/MENU de la télécommande ou sur la touche MENU sur l'appareil. Le témoin Power On / Standby sur le téléviseur LCD s'allume en bleu. ► Pour éteindre le téléviseur LCD, appuyez sur la touche POWER de la télécommande.
MYRICA VQ32-1 / MYRICA VQ40-2 Commutation des canaux (commutation de programme) ► Sélectionnez le mode TV en appuyant sur la touche TV de la télécommande. ► Appuyez sur la touche PS pour passer à un numéro de programme supérieur. ► Appuyez sur la touche PT pour passer à un numéro de programme inférieur. ► Sélectionnez un numéro de programme en appuyant directement sur les touches 0...9. Via l'aperçu des programmes dans le menu OSD.
MYRICA VQ32-1 / MYRICA VQ40-2 Réglages de volume et de son Avec les touches VOL S / VOL T de la télécommande. Appuyez sur la touche ► Appuyez sur la touche VOL X pour augmenter le volume. ► Appuyez sur la touche VOL W pour réduire le volume. pour couper le son. ► Pour couper le son, vous appuyez sur la touche ► Appuyez à nouveau sur la touche . pour rétablir le son. Pour couper le son, vous pouvez également utiliser la touche VOL X.
MYRICA VQ32-1 / MYRICA VQ40-2 Image composite (Split Screen) Image principale ► Image secondaire Appuyez à nouveau sur la touche PIP de la télécommande. Les dernières grandes et petites images sélectionnées apparaissent côte à côte. ► Commutez entre l'image principale et l'image secondaire (image dans image) avec la touche XW PIP ou F2 de la télécommande ou en sélectionnant l'option de menu Affichage Commuter PIP X.
MYRICA VQ32-1 / MYRICA VQ40-2 Possibilités de combinaison de source et source PIP = Combinaison possibile de source et source PIP - = Combinaison impossibile de source et source PIP Source Source PIP Tuner SCART1 SCART2 CVBS YC YUV VGA Tuner - - - - - - - HDMI1 HDMI2 SCART1 - - - - - - - HDMI1 - - HDMI2 - - SCART2 - - - - - - - CVBS - - - - - - - YC - - - - - - - YUV - - - - - - - VGA - - - - - - - i Si la source PIP sélectionneé ne p
MYRICA VQ32-1 / MYRICA VQ40-2 Commande du menu OSD Ci-après nous décrivons la configuration des réglages de base dans le menu OSD. ► Appuyez sur le bouton MENU pour afficher le menu principal à l'écran. ► Sélectionnez une option du menu avec la touche S ou T et appuyez sur la touche X. ► Répétez cette opération jusqu'à atteindre l'option de menu souhaitée. Les options de menu sélectionnées sont indiquées par une barre bleue.
MYRICA VQ32-1 / MYRICA VQ40-2 ► Sélectionnez le pays avec la touche X ou W. ► Sélectionnez Etendue de recherche avec la touche S ou T. ► Sélectionnez l'étendue de la recherche avec la touche X ou W. Deux possibilités s'offrent à vous : Tous les programmes et Nouveaux programmes. ► Sélectionnez Démarrer la recherche avec la touche S ou T puis appuyez sur la touche X. Recherche manuelle des émetteurs ► ► Appuyez sur la touche MENU pour ouvrir le menu principal.
MYRICA VQ32-1 / MYRICA VQ40-2 En fonction du standard de couleur, vous disposez de trois possibilités : ● standard de couleur PAL : B/G, D/K et I ● standard de couleur SECAM : B/G, D/K et L ► Sélectionnez Standard de couleur avec la touche S ou T. ► Sélectionnez un standard de couleur (PAL ou SECAM) avec la touche X ou W. ► Sélectionnez Decodeur, voir chapitre "Configurer un décodeur".
MYRICA VQ32-1 / MYRICA VQ40-2 Les possibilités suivantes s'offrent à vous : Décodeur Canal TV Tonalité Image Normal décodé décodé Décodeur A SCART1 décodé codé Décodeur B SCART1 codé codé Décodeur A SCART2 décodé codé Décodeur B SCART2 codé codé Editer l'aperçu des programmes Ci-dessous nous décrivons la séquence de modification ou d'effacement des canaux TV mémorisés dans l'aperçu des programmes. ► Appuyez sur la touche MENU pour ouvrir le menu principal.
MYRICA VQ32-1 / MYRICA VQ40-2 Effacer un programme ► Sélectionnez le programme que vous souhaitez effacer avec les touches STXW. ► Pour effacer le programme sélectionné de l'aperçu des programmes, appuyez sur la touche verte. ► Pour fermer le menu, appuyez sur la touche rouge. Réglages OSD ► Appuyez sur la touche MENU pour ouvrir le menu principal. ► Avec la touche S ou T sélectionnez le menu Setup, puis appuyez sur la touche X.
MYRICA VQ32-1 / MYRICA VQ40-2 Incrustation de logos L'option de menu Incrustation de logos vous permet d'activer ou de désactiver le logo affiché lors de la mise sous tension ou lors de l'absence de signal. ► Sélectionnez Incrustation de logos avec la touche S ou T. ► Avec la touche W ou X, sélectionnez On ou Off. Appel des réglages par défaut Vous pouvez remettre à zéro toutes les modifications apportées au menu OSD et rétablir ainsi les réglages par défaut.
MYRICA VQ32-1 / MYRICA VQ40-2 Paramètres d'image Après la première installation ou la restauration des réglages par défaut, les valeurs du menu Image sont réglées en fonction des valeurs par défaut. Vous pouvez modifier ces valeurs à votre goût et selon l'emplacement de votre téléviseur LCD ou l'éclairage. Pour les sources AV (TV, CVBS, YC, YUV, SCART1, SCART2, HDMI1, HDMI2) ► Appuyez sur la touche MENU pour ouvrir le menu principal.
MYRICA VQ32-1 / MYRICA VQ40-2 Netteté ► Sélectionnez Netteté avec la touche S ou T. ► Appuyez sur la touche X. La netteté de l'image augmente. Appuyez sur la touche W. ► La netteté de l'image diminue. Couleur ► Sélectionnez Couleur avec la touche S ou T. ► Appuyez sur la touche X. La saturation des couleurs augmente. Appuyez sur la touche W. ► La saturation des couleurs diminue. Teinte Le réglage de teinte n'est possible qu'en NTSC.
MYRICA VQ32-1 / MYRICA VQ40-2 Foto CD i Cette option n'est pas disponible en mode TV et HDMI. L'option de menu Foto CD est prévue spécialement pour la lecture d'images fixes, p. ex. de CD photo ou les CD image. ► Pour fermer les réglages d'image, appuyez sur la touche rouge. Pour sources VGA i Par "PC" nous entendons dans ce manuel des appareils pourvus de l'interface vidéo PC "VGA". ► Appuyez sur la touche MENU pour ouvrir le menu principal.
MYRICA VQ32-1 / MYRICA VQ40-2 Netteté ► Sélectionnez Netteté avec la touche S ou T. ► Appuyez sur la touche X. La netteté de l'image augmente. Appuyez sur la touche W. ► La netteté de l'image diminue. Equilibre des couleurs Sélectionnez Equilibre des couleurs avec la touche S ou T. ► Trois possibilités s'offrent à vous : Normal, Froid et Chaud. Sélectionnez l'option souhaitée avec la touche W ou X. ► Adaptation de l'image Sélectionnez Adaptation de l'imageavec la touche S ou T.
MYRICA VQ32-1 / MYRICA VQ40-2 Formats d'image pour les sources AV (TV, CVBS, YC, SCART1, SCART2, HDMI1, HDMI2) i Pour HDMI1 et 2 les réglages de format d'image sont valides lorsque Overscan est activé. Vous pouvez activer ou désactiver Overscan en sélectionnant Menu – Affichage – Overscan. Si Overscan est désactivé, les réglages de format d'image possibles sont ceux des sources VGA. ► Appuyez sur la touche MENU pour ouvrir le menu principal.
MYRICA VQ32-1 / MYRICA VQ40-2 Format d’image Description Panoramique Ce réglage de format adapte automatiquement l'échelle du signal d'entrée en sens horizontal et vertical au format plein écran. Toutefois, la modification en sens horizontal n'est pas linéaire. Ceci signifie que les contenus originaux de l'image sont affichés au centre de l'écran, mais qu'ils subissent une adaptation sur les bords. Formats d'image pour sources VGA ► Appuyez sur la touche MENU pour ouvrir le menu principal.
MYRICA VQ32-1 / MYRICA VQ40-2 Réglages de tonalité étendus 42 - Français ► Appuyez sur la touche MENU pour ouvrir le menu principal. ► Avec la touche S ou T sélectionnez le menu Tonalité et appuyez sur la touche X. ► Avec la touche S ou T sélectionnez l'option souhaitée et appuyez sur la touche X. ► Avec la touche W ou X sélectionnez le réglage souhaité pour cette option.
MYRICA VQ32-1 / MYRICA VQ40-2 Réglage de la tonalité Description Volume Affichage du réglage de volume actuel. Balance Balance entre les haut-parleurs droit et gauche. ► Appuyez sur la touche X pour réduire le niveau du haut-parleur gauche. ► Appuyez sur la touche W pour réduire le niveau du haut-parleur droit. Egaliseur Les possibilités suivantes s'offrent à vous (échantillon de son) : Classique, Relax, Jazz, Rock, Pop, Langue ; Utilisateur (voir chapitre "Réglage Egaliseur Utilisateur").
MYRICA VQ32-1 / MYRICA VQ40-2 Réglage Egaliseur Utilisateur ► Afin d'effectuer des réglages dans le menu Réglage EQ Utilisateur, dans l'option de menu Egaliseur sélectionnez le réglageUtilisateur et, après avoir sélectionné l'option de menu Réglage Egaliseur Utilisateur, activez le menu avec la touche X. Ici, vous pouvez adapter le niveau des différentes fréquences à vos exigences personnelles. ► Avec la touche S ou T , sélectionnez la fréquence souhaitée.
MYRICA VQ32-1 / MYRICA VQ40-2 Agrandir l'affichage du vidéotexte ► Pour agrandir l'affichage de la partie supérieure ou inférieure du vidéotexte, appuyez plusieurs fois sur la touche FORMAT. ► Si vous appuyez de nouveau, vous revenez à l'affichage normal. Afficher des informations masquées ► Appuyez sur la touche LIST pour afficher ou non des informations masquées, telles que les pages Quiz ou Enigmes.
MYRICA VQ32-1 / MYRICA VQ40-2 Connexion de périphériques Connexion à SCART1/SCART2 Vous pouvez connecter des périphériques à SCART1 et SCART2 tels que : lecteur DVD, enregistreur DVD, enregistreur vidéo, Box Set Top et caméscope. SCART1 permet en outre de raccorder des sources RGB. SCART2 permet en outre de raccorder des sources YC.
MYRICA VQ32-1 / MYRICA VQ40-2 Réglage Description TV SCART La fonction doit être réglée sur On pour que la commutation à l'entrée SCART correspondante ait lieu automatiquement à la mise sous tension d'un appareil sur SCART1 ou SCART2. ● SCART : Si la broche 16 présente une tension de commutation en provenance d'un périphérique, le téléviseur LCD commute automatiquement au signal RGB présent. Autrement, il lit un signal CVBS.
MYRICA VQ32-1 / MYRICA VQ40-2 Raccordement à l'entrée S-Video Sur S-VIDEO, vous pouvez raccorder des périphériques tels que des lecteurs DVD, des enregistreurs DVD et des caméscopes à une sortie vidéo S. Pour le signal audio, utilisez les entrées SVIDEO (L/R). Raccordement à l'entrée CVBS Sur CVBS, vous pouvez raccorder des périphériques tels que des lecteurs DVD, des enregistreurs vidéo et des caméscopes à une sortie CVSB. Pour le signal audio, utilisez les entrées YUV / CVBS (L/R).
MYRICA VQ32-1 / MYRICA VQ40-2 Raccordement à l'entrée VGA Pour le raccordement d'un appareil à une interface VGA, utilisez l'entrée VGA. ► Appuyez sur la touche SOURCE ou F4 pour ouvrir le menu de sélection . ► Avec la touche S ou T sélectionnez l'entrée et appuyez sur la touche rouge (M). Ou ► Sélectionnez l'entrée VGA avec la touche PC. ► Appuyez sur la touche MENU pour ouvrir le menu principal. ► Avec la touche S ou T sélectionnez le menu Setup et appuyez sur la touche X.
MYRICA VQ32-1 / MYRICA VQ40-2 Réglage Description Ajustement Auto ► Appuyez sur la touche X pour démarrer l'ajustement auto. La fonction recherche alors les réglages d'image optimaux pour le signal présent. Pendant le réglage, l'image se déplace légèrement d'un côté à l'autre. H Total Pos. V Ici vous pouvez corriger la fréquence d'échantillonnage pour l'image VGA. Cette fonction a été conçue spécialement pour des utilisateurs experts. ► Avec la touche W ou X réglez la position verticale de l'image.
MYRICA VQ32-1 / MYRICA VQ40-2 Sélectionner des entrées Pour sélectionner une entrée, utilisez le menu de sélection Entrées. A26361-K1139-Z120-1-M119, édition 1 ► Appuyez sur la touche SOURCE ou F4 pour ouvrir le menu de sélection Entrées. ► Avec la touche S ou T sélectionnez l'entrée et appuyez sur la touche rouge (M).
MYRICA VQ32-1 / MYRICA VQ40-2 Traitement des erreurs En présence d’une erreur, vérifiez tout d’abord les points suivants. Si l'erreur persiste, contrôlez, si possible, le téléviseur LCD sur une autre source de signal. Si vous êtes dans l’impossibilité de résoudre le problème, veuillez contacter notre Help Desk. ! Si les consignes indiquées ne permettent pas de remédier à l'erreur, coupez l'interrupteur d'alimentation et retirez la fiche secteur de la prise.
MYRICA VQ32-1 / MYRICA VQ40-2 Les couleurs sont pâles ou trop vives Cause Solution Mauvais réglage des couleurs. ► Réglez la couleur sous l'option de menu Image. Le câble de raccordement n’est pas branché correctement. ► Branchez correctement le câble de raccordement. L'image est coupée ou n'est pas centrée Cause Solution Mauvais réglage de la position de l'image. ► Corrigez la position de l'image. Utilisez la fonction d'Ajustement auto.
MYRICA VQ32-1 / MYRICA VQ40-2 L'image affichée est trop sombre Cause Solution Mauvais réglage de la qualité d'image. ► Corrigez la luminosité et le contraste sous l'option de menu Image. L'image est affichée, mais il n'y a pas de son Cause Solution Le son a été coupé. ► Appuyez sur la touche télécommande. Le volume est réglé au minimum. ► Augmentez le volume.
MYRICA VQ32-1 / MYRICA VQ40-2 Caractéristiques techniques Ecran MYRICA VQ32-1 Ecran Diagonale 81 cm (32") Format d’image 16:9 Dimensions de l’image visible 697 mm (horizontal) x 392 mm (vertical) Résolution 1366 x 768 éléments d'image Nombre de couleurs 16,7 millions de couleurs Normes vidéo Vidéo Tuner TV PAL/SECAM/NTSC PAL (BG, DK, I) SECAM (BG, DK, L) 47-861 MHz (VHF, UHF, Hyperband) PALplus, Cinescope Formats Identification automatique du format (plein écran) 4:3 16:9 (Top) 14:9 (Top) Pano
MYRICA VQ32-1 / MYRICA VQ40-2 Entrées / Sorties / Synchronisation Entrée PC/Video Identification de synchronisation automatique et analogique RGB Ports Video Tuner TV : IEC, résistance d’entrée 75 Ohms SCART 1 : Entrée FBAS, RGB, sortie FBAS SCART 2 : Entrée FBAS, YC, sortie FBAS Y/C : MiniDIN (HOSIDEN) YUV (FBAS) : 3 x Cinch (HDTV) FBAS : 1 x Cinch (Y) HDMI1 / 2 : Video/Audio numérique (HDTV) - HDCP Port PC analogique/numérique VGA : RGB analogique Ports Audio Haut-parleurs intégrés :
MYRICA VQ32-1 / MYRICA VQ40-2 Ecran MYRICA VQ40-2 Ecran Dimensions / diagonale 101 cm (40") Format d’image 16:9 Dimensions de l'image visible 885 mm (horizontal) x 497 mm (vertical) Résolution 1366 x 768 éléments d'image Nombre de couleurs 16,7 millions de couleurs Normes vidéo Vidéo Tuner TV PAL/SECAM/NTSC PAL (BG, DK, I) SECAM (BG, DK, L) 47-861 MHz (VHF, UHF, Hyperband) PALplus, Cinescope Formats Identification automatique du format (plein écran) 4:3 16:9 (Top) 14:9 (Top) Panoramique Plein
MYRICA VQ32-1 / MYRICA VQ40-2 Ports Video Tuner TV : CEI, résistance d'entrée 75 Ohms SCART 1 : Entrée FBAS, RGB, sortie FBAS SCART 2 : Entrée FBAS, YC, sortie FBAS Y/C : MiniDIN (HOSIDEN) YUV (FBAS) : 3 x Cinch (HDTV) FBAS : 1 x Cinch (Y) HDMI1 / 2 : Video/Audio numérique (HDTV) - HDCP Port PC analogique/numérique VGA : RGB analogique Ports Audio Haut-parleurs intégrés : 4 x large bande Entrée Stereo : 3 x 2 Cinch L/R 1VRMS (YUV/FBAS), YC, PC/VGA Sortie Stereo : 2 x Cinch (LINE OUT
Contenido Introducción........................................................................................................................................ 1 Símbolos............................................................................................................................................... 2 Indicaciones importantes .................................................................................................................. 3 Indicaciones de seguridad..............................
Contenido Formatos de imagen para fuentes AV (TV, CVBS, YC, SCART1, SCART2, HDMI1, HDMI2)................................................................................................................................40 Formatos de imagen para fuentes VGA .....................................................................................41 Ajustes de sonido ampliados ..............................................................................................................
Introducción En este manual encontrará información de interés necesaria para la puesta en funcionamiento de su televisor. El televisor LCD ofrece numerosas posibilidades de conexión para reproductores de DVD, aparatos de vídeo, videocámaras, etc. Ya sean de televisión o de vídeo, todas las imágenes se reproducen de forma muy nítida y sin distorsiones en toda la superficie de la pantalla plana. Las imágenes se distinguen por su extrema luminosidad y su brillo excepcional.
MYRICA VQ32-1 / MYRICA VQ40-2 Símbolos En este manual encontrará los siguientes símbolos y diferentes tipos de letra: ! i Identifican indicaciones que deben tenerse en cuenta. Si no las observa, puede poner en peligro su vida, deteriorar el televisor o sufrir una pérdida de datos. La garantía vencerá, si daña el televisor por no observar estas indicaciones. destaca información importante para el correcto manejo del equipo. ► señala una operación que debe realizar.
MYRICA VQ32-1 / MYRICA VQ40-2 Indicaciones importantes En este capítulo encontrará las instrucciones de seguridad que se deben tener en cuenta para manejar el televisor. ! i i Evite que se muestren imágenes fijas en la pantalla durante un periodo de tiempo prolongado, p. ej., imágenes fijas de vídeos, logotipos de emisora o similares (como máximo durante 1 hora). Estas imágenes pueden permanecer visibles en la pantalla.
MYRICA VQ32-1 / MYRICA VQ40-2 ● Los cables de transmisión de datos y de antena no deben enchufarse ni desenchufarse durante las tormentas. ● Cuide de que no penetren objetos (p. ej., grapas, clips, etc.) o líquidos al interior del equipo (peligro de descargas eléctricas y cortocircuitos). ● No deben colocarse objetos que contengan líquidos (p. ej. jarrones) sobre el equipo. ¡El equipo no es resistente al agua! Proteja el equipo de salpicaduras de agua (lluvia, agua del mar).
MYRICA VQ32-1 / MYRICA VQ40-2 Unas condiciones inadecuadas pueden hacer que el televisor LCD emita un zumbido. Por lo general, este zumbido tiene su origen en la red eléctrica, y se puede producir debido a la conexión de diferentes conductores de protección. Esto se puede solucionar conectando entre el cable de antena y la entrada de antena de la pantalla un filtro corrector. Los filtros correctores, que tienen forma de un pequeño adaptador, pueden adquirirse en los comercios especializados.
MYRICA VQ32-1 / MYRICA VQ40-2 Limpieza Antes de comenzar a limpiarlo, apague el aparato y desconéctelo de la red. Limpieza de la pantalla ● Para limpiar la pantalla se debe utilizar un producto de limpieza y un paño suaves. ● El producto de limpieza no debe contener cetona (p. ej. acetona) ni alcohol etílico. ● No utilice productos abrasivos. Limpieza de la carcasa ● No utilice para limpiar la carcasa ninguna solución química ni producto de limpieza que pudiese dañar la superficie del aparato.
MYRICA VQ32-1 / MYRICA VQ40-2 En caso de avería Desconecte el enchufe de la toma de corriente si el aparato está dañado. Desconecte inmediatamente el enchufe de la toma de corriente si el aparato desprende un olor desagradable, hace ruidos raros o sale humo de él. Proceda de la misma forma si el aparato deja de reproducir imágenes tras conectarlo o durante el funcionamiento. No intente que la pantalla siga funcionando en este estado.
MYRICA VQ32-1 / MYRICA VQ40-2 Desembalaje del envío La superficie de la pantalla del aparato de televisión es sensible al rayado y a la presión. ¡Coja el equipo solamente por la caja! ! ► Desembale todos los elementos. ► Verifique el contenido del envío y asegúrese de que no se han producido daños visibles debidos al transporte. ► Compruebe que los elementos suministrados coinciden con los datos de la nota de entrega.
MYRICA VQ32-1 / MYRICA VQ40-2 Conectores del televisor LCD 1= 2= 3= 4= 5= 6= 7= 8= 9= 10 = 11 = LINE OUT SUB LINE OUT L/R ANTENNA YUV / Y (Component Y), CVBS YUV / U (Component Pb) YUV / U (Component Pb) SCART 2 (YC, CVBS) SCART 1 (RGB, CVBS) DIG OUT VGA AUDIO IN RS-232 A26361-K1139-Z120-1-M119, edición 1 12 = 13 = 14 = 15 = 16 = 17 = 18 = 19 = 20 = HDMI 1 HDMI 2 VGA S-VIDEO Entrada de audio S-VIDEO L Entrada de audio S-VIDEO R Entrada de audio YUV/CVBS L Entrada de audio YUV/CVBS R Interruptor de enc
MYRICA VQ32-1 / MYRICA VQ40-2 A continuación se describen los distintos conectores. Conector Descripción LINE OUT SUB Conector para un subwoofer activo LINE OUT L/R p. ej., para conectar un amplificador de audio o un grabador de DVD ANTENNA Conector para la señal de antena de TV (antena terrestre analógica o TV por cable) Conectores para señales de entrada COMPONENT YUV / Y (Component Y), CVBS YUV / U (Component Pb) p. ej.
MYRICA VQ32-1 / MYRICA VQ40-2 Elementos de mando del televisor LCD Los elementos de mando del televisor LCD se encuentran en la parte inferior del equipo. Las funciones de los botones del aparato se corresponden con las del mando a distancia.
MYRICA VQ32-1 / MYRICA VQ40-2 Mando a distancia Para poder manejar el televisor LCD con el mando a distancia, el enchufe debe estar conectado a la toma de corriente y el interruptor de alimentación debe estar conectado. El mando a distancia por infrarrojos solo funciona si no hay ningún obstáculo entre el mando a distancia y el sensor de infrarrojos de la parte delantera (abajo a la derecha) del televisor LCD. El mando a distancia tiene un alcance de unos 6 m.
MYRICA VQ32-1 / MYRICA VQ40-2 Descripción del mando a distancia 1 = POWER Encendido del equipo o activación del modo Standby 2 = TV Cambio al modo TV 3 = VIDEO Cambio al modo de vídeo Selección de la entrada de vídeo 4 = PC Selecciona la conexión del PC como fuente de entrada 5 = 0 – 9 Botones numéricos Modo de TV: Selección de canal Modo de teletexto: Selección de una página del teletexto 6= i Muestra información sobre la entrada seleccionada 7 = LIST Modo TV: Acceso a la programación Menú OSD: Selección
MYRICA VQ32-1 / MYRICA VQ40-2 13 = PIP Activación del modo PIP Selección de formato PIP (PIP/Split Screen) 14 = XW PIP/F2) Intercambio de la imagen principal y de la imagen superpuesta en el modo PIP. 15 = P-POS Cambio de la posición de la imagen PIP 16 = P-SIZE Cambio del tamaño de la imagen PIP 17 = SOURCE/F4 Apertura del menú de selección "Entradas" (Fuentes) 18 = HOLD/FREEZE Congelación de la imagen. Modo de teletexto: Detención del cambio de página automático.
MYRICA VQ32-1 / MYRICA VQ40-2 26 = /MIX Ajuste del Sleep Timer. Modo de teletexto: Superposición de la imagen de TV y del teletexto) Preparación del mando a distancia ► Abra la tapa del compartimento de las pilas. ► Coloque las dos pilas que se adjuntan (AAA) en el compartimento de las pilas. Preste atención a las indicaciones de polaridad (+) y (-) del compartimento de las pilas. ► Vuelva a cerrar la tapa.
MYRICA VQ32-1 / MYRICA VQ40-2 Colocación del televisor LCD Preparación Orientación A pesar de su amplio ángulo de visión, el televisor LCD ofrece su mejor rendimiento cuando se ve en dirección directamente perpendicular. ► Oriente el televisor LCD en el sentido de visión más utilizado. Lugar de colocación ! Evite colocar el televisor enfrente de una ventana o de cualquier otra fuente de luz para evitar reflejos.
MYRICA VQ32-1 / MYRICA VQ40-2 ► Coloque el televisor LCD sobre una base estable y horizontal. El fondo debe ser fuerte y firme. ► Asegúrese antes del montaje de que el televisor LCD está apagado, y de que el cable de alimentación y el cable de señal no estén conectados.
MYRICA VQ32-1 / MYRICA VQ40-2 ! El televisor LCD solo se debe montar en paredes rectas. El material de fijación debe ser adecuado para un peso tres veces superior al de la pantalla. Recurra a un instalador cualificado si fuese necesario. Para volver a montar el pie de mesa solo se debe utilizar el material de fijación original. ► Compruebe antes del montaje si la pared tiene una capacidad de carga tres veces superior al peso del televisor LCD (Peso, véase el capítulo “Datos técnicos”).
MYRICA VQ32-1 / MYRICA VQ40-2 1= aberturas para las escarpias ► Monte las 2 escarpias (1) (los tacos y las escarpias no se adjuntan) rectas y a la distancia correspondiente (Separación, véase el capítulo "Mediciones para los taladros") en la pared. ► Coloque el televisor LCD de modo que las escarpias se puedan introducir en las aberturas de la parte posterior del aparato practicadas a tal efecto.
MYRICA VQ32-1 / MYRICA VQ40-2 Mediciones para los taladros TV LCD MYRICA VQ32-1 20 - Español A26361-K1139-Z120-1-M119, edición 1
MYRICA VQ32-1 / MYRICA VQ40-2 TV LCD MYRICA VQ40-1 A26361-K1139-Z120-1-M119, edición 1 Español - 21
MYRICA VQ32-1 / MYRICA VQ40-2 Conexión de la antena ► Si desea conectar una televisión por cable o una antena terrestre (analógica), utilice la conexión ANTENNA. Conexión del cable de alimentación 22 - Español ► Enchufe el cable de alimentación al conector del cable de alimentación del televisor LCD y el enchufe en una toma de corriente. ► Coloque el interruptor de alimentación (solo en el VQ40-2) de la parte posterior del televisor LCD en la posición "I".
MYRICA VQ32-1 / MYRICA VQ40-2 Primera instalación Tras encender por primera vez el televisor LCD se deben ajustar el idioma y el país. A continuación, se inicia la búsqueda automática de canal. Ajuste del idioma ► A26361-K1139-Z120-1-M119, edición 1 Seleccione su idioma con el botón S o T. Pulse el botón MENU.
MYRICA VQ32-1 / MYRICA VQ40-2 Selección de país para el orden de clasificación 24 - Español ► Seleccione el país en el que se va a utilizar el televisor LCD con el botónS o T. El ajuste proporciona un orden de clasificación de los canales de TV específico del país. ► Pulse el botón MENU. La búsqueda automática de canales comienza ahora. ► Si desea interrumpir la búsqueda automática de canales, pulse el botón rojo.
MYRICA VQ32-1 / MYRICA VQ40-2 Manejo Encendido y apagado del aparato 1= 2= ► Indicador durante el funcionamiento (Power On) (azul) Indicador en modo de espera (Standby) (naranja) Sensor de infrarrojos para el mando a distancia / Menú Para encender el televisor LCD, pulse el botón POWER/MENU del mando a distancia, o el botón MENU del aparato. El indicador de funcionamiento/Standby del televisor LCD se enciende en azul. ► Para apagar el televisor LCD, pulse el botón POWER del mando a distancia.
MYRICA VQ32-1 / MYRICA VQ40-2 Cambio de canal (cambio de cadena) ► Seleccione el modo de TV pulsando el botón TV del mando a distancia. ► Pulse el botón PS para cambiar al canal siguiente. ► Pulse el botón PT para cambiar al canal anterior. ► Seleccione directamente el número del canal pulsando los botones 0...9. Con el resumen de canales en el menú OSD. ► Pulse el botón LIST del mando a distancia para ver el resumen de canales en pantalla.
MYRICA VQ32-1 / MYRICA VQ40-2 Ajustes de volumen y sonido Con los botones VOL S / VOL T del mando a distancia. Con el botón ► Pulse el botón VOL X para aumentar el volumen. ► Pulse el botón VOL W para disminuir el volumen. del mando a distancia se silencia el sonido. se silencia el sonido. ► Pulsando el botón ► Pulsando de nuevo el botón se desactiva el silenciamiento del sonido. Para ello también se puede utilizar el botón VOL X.
MYRICA VQ32-1 / MYRICA VQ40-2 Pantalla partida (Split Screen) Imagen principal ► Imagen adjunta Pulse de nuevo el botón PIP del mando a distancia. Las últimas imágenes seleccionadas como imagen grande e imagen pequeña se ven una junto a la otra con el mismo tamaño. ► Se cambia entre la imagen principal y la imagen adjunta (imagen sobre imagen) con el botón XW PIP o F2 del mando a distancia o en la opción de menú Pantalla - Intercambiar X.
MYRICA VQ32-1 / MYRICA VQ40-2 Posibilidades de combinación de fuentes con la fuente PIP = Fuente combinable con la fuente PIP - = Fuente no combinable con la fuente PIP Fuente Fuente PIP Sinton SCART1 izador SCART2 CVBS YC YUV VGA HDMI1 HDMI2 HDMI1 - - HDMI2 - - Sintoniz ador - - - - - - - SCART1 - - - - - - - SCART2 - - - - - - - CVBS - - - - - - - YC - - - - - - - YUV - - - - - - - VGA - - - - - - - i Si no hay señal en la fuente PIP
MYRICA VQ32-1 / MYRICA VQ40-2 Manejo del menú OSD A continuación se describe de forma básica cómo se efectúan los ajustes en el menú OSD. ► Pulse el botón de MENÚ para mostrar en pantalla el menú principal. ► Seleccione con el botón S o T una opción del menú y pulse el botón X. ► Repita este procedimiento hasta alcanzar la opción de menú deseada. Las opciones de menú seleccionadas se marcan con una barra azul.
MYRICA VQ32-1 / MYRICA VQ40-2 ► Seleccione el país con el botón X o W. ► Seleccione Modo con el botón S o T. ► Seleccione el modo de búsqueda con el botón X o W. Existe la posibilidad de seleccionar dos opciones: Todos y Nuevos. ► Seleccione Efectuar búsqueda con el botón S o T y pulse el botón X. ► Pulse el botón MENU para abrir el menú principal. ► Seleccione con el botón S o T el menú Setup y pulse el botón X. ► Seleccione Tuner con el botón S o T y pulse el botón X.
MYRICA VQ32-1 / MYRICA VQ40-2 ► Seleccione una norma de televisión (sonido) con el botón X o W. Existe la posibilidad de seleccionar tres opciones por sistema de color: ● en el sistema de color PAL: B/G, D/K y I ● en el sistema de color SECAM: B/G, D/K y L ► Seleccione Estandar de colores con el botón S o T. ► Seleccione un sistema de color (PAL o SECAM) con el botón X o W. ► Seleccione Descod., véase el capítulo "Ajuste de un descodificador".
MYRICA VQ32-1 / MYRICA VQ40-2 Dispone de las siguientes opciones: Descodificador Canal de TV Sonido Imagen Normal descodificado descodificado Descodificador A SCART1 descodificado codificado Descodificador B SCART1 codificado Descodificador A SCART2 descodificado codificado Descodificador B SCART2 codificado codificado codificado Edición del resumen de canales A continuación se describe cómo se puede modificar el orden de los canales de TV guardados o cómo se pueden borrar estos del resumen
MYRICA VQ32-1 / MYRICA VQ40-2 El menú Resumen de canales aparece en pantalla. Ordenar ► Seleccione con los botones STXW el canal que se desea desplazar. ► Pulse el botón amarillo. El canal se marca en amarillo. ► Desplace el canal con los botones STXW a la posición deseada. ► Pulse de nuevo el botón amarillo del mando a distancia. Eliminación de un canal ► Seleccione con los botones STXW el canal que se desea borrar.
MYRICA VQ32-1 / MYRICA VQ40-2 Tiempo de apagado Bajo la opción de menú se puede modificar la duración de la visualización (tiempo entre la última activación y la desactivación) del menú OSD. ► Seleccione Tiempo de apagado con el botón S o T. Existe la posibilidad de seleccionar las siguientes opciones: Apagado; 5, 10, 15, 20, 25, y 30 segundos. Transparencia La función "Transparencia" ofrece la posibilidad de modificar la transparencia del menú OSD.
MYRICA VQ32-1 / MYRICA VQ40-2 El ajuste se hace de acuerdo con el idioma ajustado del teletexto que se utiliza. Para Europa occidental se utiliza la opción WEST. ► Para cerrar el menú, pulse el botón rojo (M). Ajustes de la imagen Tras instalar el aparato por primera vez, o tras devolverlo a los ajustes de fábrica, los valores del menú Imagen se ajustan a los valores nominales.
MYRICA VQ32-1 / MYRICA VQ40-2 Nitidez ► Seleccione Nitidez con el botón S o T. ► Pulse el botón X. La nitidez aumenta. Pulse el botón W. ► La nitidez disminuye. Color ► Seleccione Color con el botón S o T. ► Pulse el botón X. La saturación de color aumenta. Pulse el botón W. ► La saturación de color disminuye. Tono de color El ajuste de color solo se puede realizar en NTSC. Temperatura de color Seleccione Temperatura de color con el botónS o T.
MYRICA VQ32-1 / MYRICA VQ40-2 Foto CD En TV y HDMI no está disponible esta opción. i La opción de menú Foto CD es especial para la reproducción de imágenes fijas como por ejemplo CD de fotos o imágenes. ► Para cerrar los ajustes de imagen, pulse el botón rojo. Para fuentes VGA En este manual "PC" se utiliza para los aparatos con interfaz de vídeo para PC "VGA". i ► Pulse el botón MENU para abrir el menú principal. ► Seleccione con el botón S o T el menú Imagen y pulse el botón X.
MYRICA VQ32-1 / MYRICA VQ40-2 Nitidez ► Seleccione Nitidez con el botón S o T. ► Pulse el botón X. La nitidez aumenta. Pulse el botón W. ► La nitidez disminuye. Temperatura de color Seleccione Temperatura de color con el botónS o T. ► Existe la posibilidad de seleccionar las siguientes tres opciones: Normal, frío y caliente. Seleccione la opción deseada con el botón W o X. ► Adaptación de la imagen Seleccione Adaptación imagen con el botón S o T.
MYRICA VQ32-1 / MYRICA VQ40-2 Formatos de imagen para fuentes AV (TV, CVBS, YC, SCART1, SCART2, HDMI1, HDMI2) i Para HDMI1 y 2 se pueden hacer ajustes de formato de imagen solo si Overscan está encendido. Overscan se puede encender y apagar a través de Menú – Pantalla – Overscan. Si Overscan está apagado, se pueden hacer ajustes de formato de imagen como en las fuentes VGA. ► Pulse el botón MENU para abrir el menú principal. ► Seleccione con el botón S o T el menú Pantalla y pulse el botón X.
MYRICA VQ32-1 / MYRICA VQ40-2 Formato de imagen Descripción 14:9 Con el zoom 14:9 se aumenta verticalmente la imagen un 15 % en total, es decir, se corta alrededor de 15 % del contenido de la imagen en vertical. La imagen se reduce horizontalmente, en comparación con la representación a pantalla completa, un 15 %, es decir, se ven a la izquierda y a la derecha delgadas barras negras. 14:9 Top Imagen en formato 14:9 Letterbox con subtítulos.
MYRICA VQ32-1 / MYRICA VQ40-2 Formato de imagen Descripción Normal Se representa la imagen de PC a pantalla completa sin modificar la relación de aspecto. En las orillas izquierda y derecha de la pantalla se pueden ver unas rayas oscuras según el formato de entrada de la imagen de PC. Pantalla completa En este ajuste de formato la imagen se adapta tanto de forma horizontal como vertical de modo que siempre se ve una expansión de la imagen a pantalla completa.
MYRICA VQ32-1 / MYRICA VQ40-2 Ajuste de sonido Descripción Volumen Indica el volumen ajustado. Balance Equilibrio entre el altavoz izquierdo y el derecho. ► Pulse el botón X para disminuir el nivel del altavoz izquierdo. ► Pulse el botón W para disminuir el nivel del altavoz derecho. Ecualizador Se pueden seleccionar las siguientes posibilidades (muestra de sonido): clásico, plano, jazz, rock, pop, habla; usuario (remítase al capítulo "Ajuste del ecualizador del usuario").
MYRICA VQ32-1 / MYRICA VQ40-2 Ajuste del ecualizador del usuario ► Para realizar ajustes en el menú Ecualizador del usuario, se debe seleccionar en la opción de menú Ecualizador el ajuste Usuario , y tras seleccionar la opción de menú Ecualizador del usuario, activar el menú con el botón X. Aquí se puede adaptar el nivel de las distintas frecuencias a sus gustos personales. ► Seleccione con el botón S o T la frecuencia deseada. ► Pulse el botón X para subir la frecuencia seleccionada.
MYRICA VQ32-1 / MYRICA VQ40-2 Ampliación de la pantalla del teletexto ► Pulse el botón FORMAT varias veces para aumentar la parte superior o inferior de la pantalla del teletexto. ► Pulsando otra vez se vuelve a la pantalla normal. Mostrar información oculta ► Pulse el botón LIST para activar o desactivar la información oculta, como por ejemplo la que hay en las páginas de pasatiempos.
MYRICA VQ32-1 / MYRICA VQ40-2 Conexión de dispositivos externos Conexión a SCART1/SCART2 A las conexiones SCART1 y SCART2 se pueden conectar dispositivos externos como reproductores de DVD, grabadores de DVD, aparatos de vídeo, descodificadores y cámaras de vídeo. SCART1 ofrece además la posibilidad de conectar fuentes RGB. SCART2 ofrece además la posibilidad de conectar fuentes YC.
MYRICA VQ32-1 / MYRICA VQ40-2 Ajuste Descripción TV SCART La función debe permanecer en Encendido si cuando se conecta un dispositivo a SCART1 o SCART2 se debe cambiar de forma automática a la entrada SCART correspondiente. ● SCART : Si se aplica una tensión de conmutación en el terminal 16 desde un dispositivo externo, el televisor LCD cambia automáticamente a la señal RGB. En caso contrario, se reproduce una señal CVBS.
MYRICA VQ32-1 / MYRICA VQ40-2 Conexión a la entrada S-Video A S-VIDEO se pueden conectar dispositivos externos como un reproductor de DVD, un aparato de vídeo o una cámara de vídeo con una salida S-Video. Para la señal de audio se deben utilizar las entradas S-VIDEO (L/R). Conexión a la entrada CVBS A CVBS se pueden conectar dispositivos externos como un reproductor de DVD, un aparato de vídeo o una cámara de vídeo con una salida CVBS.
MYRICA VQ32-1 / MYRICA VQ40-2 Conexión a la entrada VGA Para la conexión de un aparato con interfaz VGA, utilice la entrada VGA. ► Pulse el botón SOURCE o F4 para abrir el menú de selección . ► Seleccione con el botón S o T la entrada y pulse el botón rojo(M). o bien ► seleccione la entrada VGA con el botón PC. ► Pulse el botón MENU para abrir el menú principal. ► Seleccione con el botón S o T el menú Setup y pulse el botón X.
MYRICA VQ32-1 / MYRICA VQ40-2 Ajuste Descripción Instalación automática ► Pulse el botón X para iniciar la instalación automática. La función intenta encontrar los ajustes de imagen óptimos para la señal recibida. La imagen se mueve ligeramente durante el ajuste. Total H Pos. V Aquí se puede corregir la frecuencia de exploración para la imagen VGA. Esta función está destinada a usuarios expertos. ► Ajuste con el botón W o X la posición vertical de la imagen.
MYRICA VQ32-1 / MYRICA VQ40-2 Selección de entradas Para seleccionar una entrada se debe utilizar el menú de selección Entradas. A26361-K1139-Z120-1-M119, edición 1 ► Pulse el botón SOURCE o F4 para abrir el menú de selección Entradas. ► Seleccione con el botón S o T la entrada y pulse el botón rojo(M).
MYRICA VQ32-1 / MYRICA VQ40-2 Tratamiento de errores Cuando surja un error, compruebe primero los puntos siguientes. Si no se elimina el problema de esta forma, compruebe el televisor LCD si es posible con otra señal de entrada. Si no puede solucionar el problema, póngase en contacto con nuestro Help Desk. ! Si las indicaciones proporcionadas para la solución de los errores no resultan efectivas, apague el aparato con el interruptor de alimentación y desenchúfelo de la toma de corriente.
MYRICA VQ32-1 / MYRICA VQ40-2 Los colores son débiles o exagerados Causa Solución Color incorrectamente ajustado ► Ajuste el color en la opción de menú Imagen. El cable de conexión no está bien conectado ► Conecte correctamente el cable de conexión. La imagen está cortada o descentrada Causa Solución Posición de la imagen incorrectamente ajustada ► Corrija la posición de la imagen. Utilice la función de instalación automática.
MYRICA VQ32-1 / MYRICA VQ40-2 La imagen es demasiado oscura Causa Solución La calidad de la imagen no está correctamente ajustada ► Corrija el brillo y el contraste de la imagen en la opción de menú Imagen. Hay imagen pero no hay sonido Causa Solución El sonido está silenciado ► Pulse el botón Volumen ajustado al mínimo ► Aumente el volumen. del mando a distancia.
MYRICA VQ32-1 / MYRICA VQ40-2 Rayas horizontales en señales de televisión o vídeo Causa Solución La fuente de la señal está colocada delante de la pantalla ► Coloque la fuente de la señal al lado o detrás de la pantalla por principio. El blindaje del cable del vídeo no es suficiente ► Utilice solamente cables de señal de buena calidad con un buen blindaje. i Para devolver todos los ajustes a su estado original, utilice la opción de menúSetup – OSD – Reinicio valores de fábrica.
MYRICA VQ32-1 / MYRICA VQ40-2 Datos técnicos Pantalla MYRICA VQ32-1 Pantalla Diagonal 81 cm (32 pulgadas) Formato de imagen 16:9 Imagen visible 697 mm (horizontal) x 392 mm (vertical) Resolución 1366 x 768 píxeles Cantidad de colores 16,7 mill.
MYRICA VQ32-1 / MYRICA VQ40-2 Entradas, salidas, sincronización Entrada ordenador/vídeo RGB analógica y reconocimiento automático de sincronización Conexiones de vídeo Sintonizador de TV: IEC, resistencia de entrada: 75 ohmios SCART 1: RGB, entrada CVBS, salida CVBS SCART 2: YC, entrada CVBS, salida CVBS Y/C: MiniDIN (HOSIDEN) YUV (CVBS): 3 RCA (HDTV) CVBS: 1 RCA (Y) HDMI1 / 2: Vídeo/audio digital (HDTV) - HDCP Conexión de ordenador analógica/digital VGA: RGB analógico Conexiones de aud
MYRICA VQ32-1 / MYRICA VQ40-2 Pantalla MYRICA VQ40-2 Pantalla Tamaño / diagonal 101 cm (40 pulgadas) Formato de imagen 16:9 Imagen visible 885 mm (horizontal) x 497 mm (vertical) Resolución 1366 x 768 píxeles Cantidad de colores 16,7 mill.
MYRICA VQ32-1 / MYRICA VQ40-2 SCART 1: RGB, entrada CVBS, salida CVBS SCART 2: YC, entrada CVBS, salida CVBS Y/C: MiniDIN (HOSIDEN) YUV (CVBS): 3 RCA (HDTV) CVBS: 1 RCA (Y) HDMI1 / 2: Vídeo/audio digital (HDTV) - HDCP Conexión de ordenador analógica/digital VGA: RGB analógico Conexiones de audio Altavoces integrados: 4, banda ancha Entrada estéreo: 3 x 2 RCA I/D 1VRMS (YUV (CVBS), YC, PC/VGA Salida estéreo: 2 RCA (LINE OUT I/D) Subwoofer activo: 1 RCA (LINE OUT SUB) Salida de audio
MYRICA VQ32-1 / MYRICA VQ40-2 60 - Español A26361-K1139-Z120-1-M119, edición 1
Sommario Introduzione ........................................................................................................................................ 1 Simboli.................................................................................................................................................. 2 Istruzioni importanti ........................................................................................................................... 3 Norme di sicurezza.............................
Sommario Formati immagine per le sorgenti AV (TV, CVBS, YC, SCART1, SCART2, HDMI1, HDMI2) ....40 Formati immagini per le sorgenti VGA ........................................................................................41 Impostazioni audio avanzate ..............................................................................................................42 Impostazioni utente equalizzatore ..............................................................................................44 Televideo.....
Introduzione In questo manuale vengono fornite le informazioni necessarie per la messa in funzione dell'apparecchio televisivo. Il televisore LCD consente di collegare numerosi dispositivi, ad esempio un lettore DVD, un videoregistratore, una videocamera ecc. Qualunque sia l'origine dell'immagine, televisiva o video, la resa sulla superficie completamente piatta dello schermo è sempre perfettamente nitida e priva di distorsioni.
MYRICA VQ32-1 / MYRICA VQ40-2 Simboli In questo manuale vengono utilizzati i seguenti simboli: ! i Indica istruzioni a cui è necessario attenersi. La mancata osservanza potrebbe comportare lesioni personali, compromettere il funzionamento del televisore o la sicurezza dei dati. In caso di guasto provocato della mancata osservanza di queste istruzioni, la garanzia non sarà più valida. Indica informazioni importanti per l'uso appropriato del sistema. ► Indica una fase di una procedura da eseguire.
MYRICA VQ32-1 / MYRICA VQ40-2 Istruzioni importanti In questo capitolo sono riportate le norme di sicurezza a cui è indispensabile attenersi durante l'utilizzo del televisore. ! i i Evitare il fermo immagine sullo schermo per un periodo prolungato, ad esempio i fermi immagine dei video, i loghi delle emittenti o simili (massimo 1 ora). Queste immagini possono rimanere visibili.
MYRICA VQ32-1 / MYRICA VQ40-2 ● Fare attenzione che all'interno dell'apparecchio non penetrino oggetti (ad esempio collane, graffette, ecc.) o liquidi (pericolo di scosse elettriche o cortocircuito). ● Non posizionare sull’apparecchio alcun contenitore con liquidi, ad esempio vasi. L’apparecchio non è resistente all’acqua. Proteggere l'apparecchio dagli spruzzi d’acqua (pioggia, acqua marina).
MYRICA VQ32-1 / MYRICA VQ40-2 Condizioni sfavorevoli di utilizzo possono causare un ronzio del televisore LCD. Il ronzio proviene di solito dall'alimentazione di rete e può essere eliminato collegando diversi conduttori di protezione. Un possibile rimedio è costituito da un cosiddetto filtro di corrente alla schermatura tra il cavo antenna di ingresso e il connettore antenna sullo schermo. Questo tipo di filtro è disponibile nei negozi specializzati sotto forma di piccolo adattatore.
MYRICA VQ32-1 / MYRICA VQ40-2 Pulizia Prima di procedere alla pulizia dell'apparecchio, spegnerlo e staccare la spina di alimentazione dalla presa. Pulizia dello schermo ● Per la pulizia dello schermo, utilizzare un panno morbido con un detergente delicato. ● Il detergente non deve contenere chetoni (ad esempio acetone) oppure alcool etilico. ● Non utilizzare sostanze abrasive.
MYRICA VQ32-1 / MYRICA VQ40-2 In caso di anomalie Se l'apparecchio è danneggiato, staccare la spina dalla presa di alimentazione. Staccare immediatamente la spina dalla presa di alimentazione, se l'apparecchio emette fumo, odori spiacevoli o rumorosità anomala. Procedere allo stesso modo anche quando l'apparecchio non trasmette alcuna immagine dopo l'accensione o durante il funzionamento. Non continuare a utilizzare uno schermo che si trova in questa condizione. Non tentare mai di aprire l'apparecchio.
MYRICA VQ32-1 / MYRICA VQ40-2 Controllo della fornitura La superficie del display dell'apparecchio TV è sensibile alla pressione e ai graffi. Afferrare l'apparecchio solo dall'alloggiamento. ! ► Rimuovere tutti i componenti dall'imballaggio. ► Verificare che i componenti contenuti nell'imballaggio non abbiano subito danni visibili durante il trasporto. ► Verificare che i componenti forniti corrispondano ai dati indicati sulla bolla di consegna.
MYRICA VQ32-1 / MYRICA VQ40-2 Connettori sul televisore LCD 1= 2= 3= 4= 5= 6= 7= 8= 9= 10 = 11 = LINE OUT SUB LINE OUT L/R ANTENNA YUV / Y (Component Y), CVBS YUV / U (Component Pb) YUV / V (Component Pr) SCART 2 (YC, CVBS) SCART 1 (RGB, CVBS) DIG OUT VGA AUDIO IN RS-232 A26361-K1139-Z120-1-M119, edizione 1 12 = 13 = 14 = 15 = 16 = 17 = 18 = 19 = 20 = HDMI 1 HDMI 2 VGA S-VIDEO Ingresso audio S-VIDEO L Ingresso audio S-VIDEO R Ingresso audio YUV/CVBS L Ingresso audio YUV/CVBS R Interruttore ON/OFF (sol
MYRICA VQ32-1 / MYRICA VQ40-2 Di seguito è riportata una descrizione dei diversi connettori: Connettore Descrizione LINE OUT SUB Connettore per il subwoofer attivo LINE OUT L/R Ad esempio, connettore per amplificatore audio o registratore DVD ANTENNA Connettore segnale antenna TV (antenna analogica terrestre o collegamento via cavo) Connettori per i segnali di ingresso dei componenti.
MYRICA VQ32-1 / MYRICA VQ40-2 Elementi di comando del televisore LCD Gli elementi di comando della TV LCD si trovano sul lato inferiore dell’apparecchio. Le funzioni dei tasti sull'apparecchio corrispondono a quelle dei tasti sul telecomando.
MYRICA VQ32-1 / MYRICA VQ40-2 Telecomando Per selezionare le funzioni del televisore LCD tramite il telecomando, è necessario inserire la spina nella presa di alimentazione e attivare la presa. Il telecomando a infrarossi funziona solo se non sono presenti ostacoli tra il telecomando e il sensore a infrarossi situato in basso a destra sul lato anteriore del televisore LCD. Il raggio di azione del telecomando è di circa 6 m.
MYRICA VQ32-1 / MYRICA VQ40-2 Panoramica del telecomando 1 = POWER Accensione dell'apparecchio o attivazione del modo Standby 2 = TV Passaggio al modo TV 3 = VIDEO Passaggio al modo Video Commutazione fra le sorgenti video 4 = PC Selezione del collegamento PC come sorgente di ingresso 5 = 0 – 9 tasti numerici Modo TV: Selezione canale Modo televideo: selezione di una pagina televideo 6= i Mostra le informazioni sulla sorgente corrente 7 = LIST Modo TV: apre la panoramica dei programmi Menu OSD: selezione d
MYRICA VQ32-1 / MYRICA VQ40-2 13 = PIP Attiva il modo PIP Commutazione tra i formati PIP (PIP/Split Screen) 14 = XW PIP/F2) Commutazione tra immagine principale e immagine visualizzata nel modo PIP. 15 = P-POS Spostamento della posizione dell'immagine piccola PIP 16 = P-SIZE Modifica delle dimensioni dell'immagine PIP 17 = SOURCE/F4 Apertura del menu di selezione "Ingressi" (sorgenti) 18 = HOLD/FREEZE Creazione di un fermo immagine da scene in movimento.
MYRICA VQ32-1 / MYRICA VQ40-2 26 = /MIX Impostazione dello Sleep Timer. Modo televideo: funzionamento combinato (immagine TV/televideo) Preparazione del telecomando ► Aprire il coperchio dello scomparto batterie. ► Inserire le due batterie (AAA) fornite nello scomparto. Prestare attenzione ai contrassegni della polarità (+) e (-) sul fondo dello scomparto batterie. ► Chiudere il coperchio dello scomparto batterie.
MYRICA VQ32-1 / MYRICA VQ40-2 Posizionamento della TV LCD Preparazione Linea di mira Nonostante l'ampio angolo di osservazione, il televisore LCD offre le prestazioni migliori quando è posizionato entro una linea di mira verticale diretta. ► Orientare il televisore LCD verso la linea di mira utilizzata più di frequente. Luogo di posizionamento ! Non posizionare l'apparecchio di fronte a finestre o altre fonti di illuminazione, in modo da evitare la riflessione.
MYRICA VQ32-1 / MYRICA VQ40-2 ► Posizionare il televisore LCD su un supporto orizzontale e resistente. La superficie di appoggio deve essere fissa e stabile dal punto di vista statico. ► Prima del montaggio, assicurarsi che il televisore LCD sia spento e che il cavo di alimentazione e il cavo segnale siano scollegati. Montaggio a parete Per il montaggio a parete, rispettare le distanze minime per una ventilazione adeguata dell'apparecchio.
MYRICA VQ32-1 / MYRICA VQ40-2 ! La TV LCD può essere montata su pareti verticali. Gli elementi di fissaggio devono essere progettati per un peso 3 volte superiore a quello dello schermo. Se necessario, rivolgersi a un installatore qualificato. Per il rimontaggio del supporto da tavolo, utilizzare solo gli elementi di fissaggio originali.
MYRICA VQ32-1 / MYRICA VQ40-2 1= Aperture per i ganci di fissaggio ► Montare i 2 ganci di fissaggio (1) (i tasselli e i ganci di fissaggio non vengono forniti con il televisore) in direzione orizzontale e alla distanza corrispondente (per la distanza, vedere il capitolo "Dimensioni dei fori") sulla parete. ► Posizionare il televisore LCD in modo che i ganci di fissaggio possano essere inseriti nelle aperture predisposte sul retro dell'apparecchio.
MYRICA VQ32-1 / MYRICA VQ40-2 Dimensioni dei fori LCD TV MYRICA VQ32-1 20 - Italiano A26361-K1139-Z120-1-M119, edizione 1
MYRICA VQ32-1 / MYRICA VQ40-2 LCD TV MYRICA VQ40-1 A26361-K1139-Z120-1-M119, edizione 1 Italiano - 21
MYRICA VQ32-1 / MYRICA VQ40-2 Collegamento dell’antenna ► Se si desidera collegare un connettore cavo o un'antenna terrestre (analogica), utilizzare la presa ANTENNA. Collegamento del cavo di alimentazione 22 - Italiano ► Inserire il cavo di alimentazione nella presa di alimentazione sulla TV LCD e la spia di alimentazione in una presa. ► Spostare l'interruttore di alimentazione (solo sui modelli VQ40-2) sul retro della TV LCD sulla posizione “I”.
MYRICA VQ32-1 / MYRICA VQ40-2 Prima installazione Dopo la prima installazione del televisore LCD, è necessario impostare la lingua e il paese di utilizzo. Al termine dell'impostazione viene avviata la ricerca automatica dei canali. Impostazione della lingua ► A26361-K1139-Z120-1-M119, edizione 1 Selezionare la propria lingua utilizzando i tasti S o T. Premete il tasto MENU.
MYRICA VQ32-1 / MYRICA VQ40-2 Selezione del paese per la sequenza di ordinamento 24 - Italiano ► Selezionare con il tasto S o T il paese di utilizzo del televisore LCD. L'impostazione determina una sequenza di ordinamento dei canali TV specifica del paese. ► Premere il tasto MENU. Inizia ora la ricerca automatica dei canali. ► Se si desidera interrompere la ricerca automatica dei canali, premere il tasto rosso.
MYRICA VQ32-1 / MYRICA VQ40-2 Funzionamento Accensione/spegnimento dell'apparecchio 1= 2= ► Spia di funzionamento (Power On) (blu) Spia di attesa (Standby) (arancione) Sensore IR per il telecomando / Menu Per accendere il televisore LCD, premere il tasto POWER/MENU sul telecomando oppure il tasto MENU sull'apparecchio. La spia Power On/Standby sulla TV LCD si accende di colore blu. ► Per spegnere il televisore LCD, premere il tasto POWER sul telecomando.
MYRICA VQ32-1 / MYRICA VQ40-2 Cambio di canale (cambio di programma) ► Selezionare il modo TV premendo il tasto TV sul telecomando. ► Premere il tasto PS per aumentare il numero di programma. ► Premere il tasto PT per ridurre il numero di programma. ► Selezionare un numero di programma direttamente premendo i tasti 0...9. Tramite l'elenco dei programmi nel menu OSD. ► Premere il tasto LIST sul telecomando per visualizzare sullo schermo l'elenco dei programmi.
MYRICA VQ32-1 / MYRICA VQ40-2 Impostazioni del volume e dell'audio Con i tasti VOL S / VOL T sul telecomando. Disattivare l'audio premendo il tasto ► Premere il tasto VOL X per aumentare il volume. ► Premere il tasto VOL W per ridurre il volume. sul telecomando. per disattivare l'audio. ► Premere il tasto ► Premere nuovamente il tasto per riattivare l'audio. A questo scopo, è possibile utilizzare anche il tasto VOL X.
MYRICA VQ32-1 / MYRICA VQ40-2 Schermo diviso (Split Screen) Immagine principale ► Immagine secondaria Premere nuovamente il tasto PIP sul telecomando. L'immagini grande e l'immagine piccola selezionate per ultime vengono visualizzate affiancate. ► Passare dall'immagine principale a quella secondaria (Picture in Picture) con il tasto XW PIP o F2 sul telecomando o tramite l'opzione di menu Display - Cambio PIPX.
MYRICA VQ32-1 / MYRICA VQ40-2 Combinazioni possibili di sorgenti e sorgenti PIP = Sorgente che può essere combinata con una sorgente PIP - = Sorgente che non può essere combinata con una sorgente PIP Sorgente Sorgente PIP Tuner SCART1 SCART2 CVBS YC YUV VGA Tuner - - - - - - - HDMI1 HDMI2 SCART1 - - - - - - - HDMI1 - - HDMI2 - - SCART2 - - - - - - - CVBS - - - - - - - YC - - - - - - - YUV - - - - - - - VGA - - - - - - - i Se non è pre
MYRICA VQ32-1 / MYRICA VQ40-2 Impostazioni del menu OSD Di seguito viene descritto come eseguire le impostazioni di base del menu OSD. ► Premere il tasto MENU per visualizzare sullo schermo il menu principale. ► Selezionare con il tasto S o T un'opzione di menu e premere il tasto X. ► Ripetere questa procedura fino a quando non viene raggiunta l'opzione di menu desiderata. Le opzioni di menu selezionate sono evidenziate in blu.
MYRICA VQ32-1 / MYRICA VQ40-2 ► Selezionare il paese con il tasto X o W. ► Selezionare Ricerca con il tasto S o T. ► Selezionare il tipo di ricerca con il tasto X o W. Sono disponibili due opzioni: Tutti i progr. e Nuovi progr. ► Selezionare Avviare ricerca con il tasto S o T e premere il tasto X. ► Premere il tasto MENU per visualizzare il menu principale. ► Selezionare con il tasto S o T il menu Setup e premere il tasto X. ► Selezionare Tuner con il tasto S o T e premere il tasto X.
MYRICA VQ32-1 / MYRICA VQ40-2 A seconda della codifica del colore, sono disponibili tre opzioni: ● per lo standard PAL: B/G, D/K e I ● per lo standard SECAM: B/G, D/K ed L ► Selezionare Colore standard con il tasto S o T. ► Selezionare una codifica del colore (PAL o SECAM) con il tasto X o W. ► Selezionare Decoder; vedere il capitolo "Impostazione di un decoder". Modifica del numero del canale ► Selezionare Nome con il tasto So T e premere il tasto X.
MYRICA VQ32-1 / MYRICA VQ40-2 Sono disponibili le opzioni seguenti: Decoder Canale TV Audio Immagine Normale non codificato non codificato Decoder A SCART1 non codificato codificato Decoder B SCART1 codificato Decoder A SCART2 non codificato codificato Decoder B SCART2 codificato codificato codificato Modifica dell'elenco programmi Di seguito viene descritto come modificare la sequenza dei canali TV memorizzati oppure come eliminarli dall'elenco programmi.
MYRICA VQ32-1 / MYRICA VQ40-2 Eliminazione di un programma ► Selezionare con i tasti STXW il programma che deve essere eliminato. ► Premere il tasto verde per eliminare il programma desiderato dall'elenco programmi. ► Per chiudere il menu, premere il tasto rosso. Impostazioni OSD ► Premere il tasto MENU per visualizzare il menu principale. ► Selezionare con il tasto S o T il menu Setup e premere il tasto X. ► Selezionare OSD con il tasto So T e premere il tasto X.
MYRICA VQ32-1 / MYRICA VQ40-2 Visualizza logo L'opzione di menu Visualizza logo consente di visualizzare o nascondere il logo all'accensione o in caso di assenza di segnale. ► Selezionare Visualizza logo con il tasto So T. ► Selezionare con i tasti W o X Acceso o Spento. Impostazioni di fabbrica È possibile annullare tutte le modifiche eseguite nel menu OSD e ripristinare le impostazioni predefinite in fabbrica. ► Selezionare Impostazioni di fabbrica con il tasto So T.
MYRICA VQ32-1 / MYRICA VQ40-2 Impostazioni immagine Dopo la prima installazione o il ripristino delle impostazioni di fabbrica, le impostazioni del menu Immagine sono configurate sui valori predefiniti. Come descritto di seguito, è possibile adeguare tali valori al guasto personale o al luogo di utilizzo della TV LCD e alla specifica incidenza luminosa. Per le sorgenti AV (TV, CVBS, YC, YUV, SCART1, SCART2, HDMI1, HDMI2) ► Premere il tasto MENU per visualizzare il menu principale.
MYRICA VQ32-1 / MYRICA VQ40-2 Nitidezza ► Selezionare Nitidezza con il tasto S o T. ► Premere il tasto X. La nitidezza dell'immagine aumenta. Premere il tasto W. ► La nitidezza dell'immagine si riduce. Colore ► Selezionare Colore con il tasto S o T. ► Premere il tasto X. La saturazione del colore aumenta. Premere il tasto W. ► La saturazione del colore si riduce. Tonalità L'impostazione del colore è possibile solo con lo standard NTSC.
MYRICA VQ32-1 / MYRICA VQ40-2 Foto CD i Questa opzione non è disponibile per i segnali TV e HDMI. L'opzione di menu Foto CD consente di riprodurre immagini fisse, ad esempio da CD di foto o Picture CD. ► Per chiudere le impostazioni immagine, premere il tasto rosso. Per le sorgenti VGA i La sigla "PC" indica in questo manuale i dispositivi dotati di interfaccia video PC "VGA". ► Premere il tasto MENU per visualizzare il menu principale.
MYRICA VQ32-1 / MYRICA VQ40-2 Nitidezza ► Selezionare Nitidezza con il tasto S o T. ► Premere il tasto X. La nitidezza dell'immagine aumenta. Premere il tasto W. ► La nitidezza dell'immagine si riduce. Temperatura colore Selezionare Temperatura colore con il tasto S o T. ► Sono disponibili le tre opzioni seguenti: Normale, Freddo e Caldo. Selezionare l'opzione desiderata con il tasto W o X. ► Regolazione immagine Selezionare Regolazione immagine con il tasto S o T.
MYRICA VQ32-1 / MYRICA VQ40-2 Formati immagine per le sorgenti AV (TV, CVBS, YC, SCART1, SCART2, HDMI1, HDMI2) i Per HDMI1 e 2 le impostazioni del formato immagine vengono applicate se la funzione overscan è attivata. La funzione overscan può essere attivata o disattivata selezionando Menu – Display – Overscan. Se l'overscan è disattivato, è possibile impostare il formato immagine come per le sorgenti VGA. ► Premere il tasto MENU per visualizzare il menu principale.
MYRICA VQ32-1 / MYRICA VQ40-2 Formato immagine Descrizione 14:9 Nel formato zoom 14:9 l'immagine viene ingrandita complessivamente del 15%, ovvero viene eliminato circa il 15% del contenuto dell'immagine in direzione verticale. Rispetto al formato a tutto schermo, in direzione orizzontale l'immagine viene ridotta del 15%, ovvero sui bordi destro e sinistro compaiono due strisce nere sottili. 14:9 Top Immagine in formato 14:9 Letterbox con sottotitoli.
MYRICA VQ32-1 / MYRICA VQ40-2 Impostazioni audio avanzate 42 - Italiano ► Premere il tasto MENU per visualizzare il menu principale. ► Selezionare con il tasto S o T il menu Suono e premere il tasto X. ► Selezionare con il tasto S o T l'opzione desiderata e premere il tasto X. ► Selezionare l'impostazione desiderata per l'opzione con il tasto W o X.
MYRICA VQ32-1 / MYRICA VQ40-2 Impostazione audio Descrizione Volume Visualizza il volume impostato corrente. Balance Bilanciamento tra l'altoparlante destro e l'altoparlante sinistro. ► Premere il tasto X per abbassare il livello dell'altoparlante sinistro. ► Premere il tasto W per abbassare il livello dell'altoparlante destro.
MYRICA VQ32-1 / MYRICA VQ40-2 Impostazioni utente equalizzatore ► Per eseguire le impostazioni nel menu Equalizzatore utente, è necessario selezionare nel menu Equalizzatore l'impostazione Utente e, dopo la selezione dell'opzione Equalizzatore utente, attivare il menu con il tasto X. Qui è possibile selezionare il livello delle diverse frequenze in base alle proprie esigenze. ► Selezionare la frequenza desiderata con il tasto S o T . ► Premere il tasto X per aumentare la frequenza selezionata.
MYRICA VQ32-1 / MYRICA VQ40-2 Ingrandimento del televideo ► Premere più volte il tasto FORMAT per ingrandire la parte superiore o inferiore della pagina del televideo visualizzata. ► Premendo il tasto ripetutamente, si ritorna alla visualizzazione normale. Visualizzazione delle informazioni nascoste ► Premere il tasto LIST per visualizzare o nascondere le informazioni nascoste, ad esempio sulle pagine dei quiz o degli indovinelli.
MYRICA VQ32-1 / MYRICA VQ40-2 Collegamento di dispositivi esterni Collegamento alla presa SCART1/SCART2 Alle prese SCART1 e SCART2 è possibile collegare dispositivi esterni, ad esempio lettori DVD, registratori DVD, videoregistratori, ricevitori Set-Top Box e camcorder. Alla presa SCART1 è possibile inoltre collegare sorgenti RGB. Alla presa SCART2 è possibile inoltre collegare sorgenti YC.
MYRICA VQ32-1 / MYRICA VQ40-2 Impostazione Descrizione TV SCART Impostare questa funzione su Acceso, se si desidera che l'apparecchio venga commutato automaticamente sull'ingresso SCART corrispondente all'accensione di un dispositivo collegato a SCART1 o SCART2. ● SCART : se è presente una tensione di commutazione di un dispositivo esterno sul pin 16, la TV LCD commuta automaticamente sul segnale RGB in entrata. In caso contrario, viene riprodotto un segnale CVBS.
MYRICA VQ32-1 / MYRICA VQ40-2 Collegamento all'ingresso S-Video All'ingresso S-VIDEO è possibile collegare dispositivi esterni, quali lettori DVD, videoregistratori e camcorder dotati di uscita SVideo. Per il segnale audio utilizzare gli ingressi SVIDEO (L/R). Collegamento all'ingresso CVBS All'ingresso CVBS è possibile collegare dispositivi esterni, quali lettori DVD, videoregistratori e camcorder dotati di uscita CVBS. Per il segnale audio utilizzare gli ingressi YUV/CVBS (L/R).
MYRICA VQ32-1 / MYRICA VQ40-2 Collegamento all'ingresso VGA Per il collegamento di un dispositivo con interfaccia VGA, utilizzare l'ingresso VGA. ► Premere il tasto SOURCE o F4 per aprire il menu di selezione . ► Selezionare con il tasto So T l'ingresso e premere il tasto rosso (M). Oppure ► Selezionare l'ingresso VGA con il tasto PC. Impostazioni per VGA (RGB) A26361-K1139-Z120-1-M119, edizione 1 ► Premere il tasto MENU per visualizzare il menu principale.
MYRICA VQ32-1 / MYRICA VQ40-2 Impostazione Descrizione Installazione automatica ► Premere il tasto X per avviare la sintonizzazione automatica. Tramite questa funzione vengono rilevate le impostazioni immagine ottimali per il segnale esistente. Durante l'impostazione, si potrebbe verificare un lieve tremolio dell'immagine. Totale orizz. Posiz. vert. Qui è possibile correggere la frequenza di scansione per l'immagine VGA. Questa funzione è destinata agli utenti esperti.
MYRICA VQ32-1 / MYRICA VQ40-2 Selezione degli ingressi Per la selezione di un ingresso, utilizzare il menu di selezione Ingressi. A26361-K1139-Z120-1-M119, edizione 1 ► Premere il tasto SOURCE o F4 per aprire il menu di selezione Ingressi. ► Selezionare con il tasto So T l'ingresso e premere il tasto rosso (M).
MYRICA VQ32-1 / MYRICA VQ40-2 Risoluzione dei problemi Se si presenta un errore, verificare dapprima i punti indicati di seguito. Se il problema relativo all'immagine persiste, controllare la TV LCD con una sorgente segnale diversa, se possibile. Se non è possibile eliminare il problema, contattare il nostro Help Desk. ! Se le istruzioni elencate di seguito non sono sufficienti a risolvere un problema, spegnere l'apparecchio con l'interruttore principale e staccare la spina dalla presa di alimentazione.
MYRICA VQ32-1 / MYRICA VQ40-2 I colori sono sbiaditi o troppo forti Causa Eliminazione del guasto I colori non sono impostati correttamente. ► Regolare i colori tramite l'opzione di menu Immagine. Il cavo di collegamento non è collegato correttamente. ► Collegare il cavo di collegamento correttamente. L'immagine appare tagliata o non centrata Causa Eliminazione del guasto La posizione dell'immagine non è impostata correttamente. ► Correggere la posizione dell'immagine.
MYRICA VQ32-1 / MYRICA VQ40-2 L'immagine è troppo scura Causa Eliminazione del guasto La qualità dell'immagine non è impostata correttamente. ► Correggere la luminosità e il contrasto tramite l'opzione di menu Immagine. L'immagine compare ma l'audio è assente Causa Eliminazione del guasto L'audio è disattivato. ► Premere il tasto Il volume è impostato sul minimo. ► Aumentare il volume. sul telecomando.
MYRICA VQ32-1 / MYRICA VQ40-2 Dati tecnici Schermo MYRICA VQ32-1 Schermo Diagonale 81 cm (32") Formato immagine 16:9 Dimensione immagine visualizzabile 697 mm (orizzontale) x 392 mm (verticale) Risoluzione 1366 x 768 pixel Rappresentazione colori 16,7 milioni di colori Standard video Video Tuner TV PAL/SECAM/NTSC PAL (BG, DK, I) SECAM (BG, DK, L) 47-861 MHz (VHF, UHF, Hyperband) PALplus, Cinescope Formati Riconoscimento automatico del formato (schermo intero) 4:3 16:9 (Top) 14:9 (Top) Panorama
MYRICA VQ32-1 / MYRICA VQ40-2 Ingressi/uscite/sincronizzazione Ingresso PC/video RGB analogico e riconoscimento automatico della sincronizzazione Connettori video Tuner TV: IEC, resistenza di entrata 75 Ohm SCART 1: RGB, ingresso FBAS, uscita FBAS SCART 2: YC, ingresso FBAS, uscita FBAS Y/C: MiniDIN (HOSIDEN) YUV (FBAS): 3 x Cinch (HDTV) FBAS: 1 x Cinch (Y) HDMI1 / 2: Video/audio digitale (HDTV) - HDCP Connettore PC analogico/digitale VGA: RGB analogico Connettori audio Altoparlanti in
MYRICA VQ32-1 / MYRICA VQ40-2 Schermo MYRICA VQ40-2 Schermo Dimensione/diagonale 101 cm (40”) Formato immagine 16:9 Dimensione immagine visualizzabile 885 mm (orizzontale) x 497 mm (verticale) Risoluzione 1366 x 768 pixel Rappresentazione colori 16,7 milioni di colori Standard video Video Tuner TV PAL/SECAM/NTSC PAL (BG, DK, I) SECAM (BG, DK, L) 47-861 MHz (VHF, UHF, Hyperband) PALplus, Cinescope Formati Riconoscimento automatico del formato (schermo intero) 4:3 16:9 (Top) 14:9 (Top) Panorama
MYRICA VQ32-1 / MYRICA VQ40-2 Connettori video Tuner TV: IEC, resistenza di entrata 75 Ohm SCART 1: RGB, ingresso FBAS, uscita FBAS SCART 2: YC, ingresso FBAS, uscita FBAS Y/C: MiniDIN (HOSIDEN) YUV (FBAS): 3 x Cinch (HDTV) FBAS: 1 x Cinch (Y) HDMI1 / 2: Video/audio digitale (HDTV) - HDCP Connettore PC analogico/digitale VGA: RGB analogico Connettori audio Altoparlanti integrati: 4 x banda larga Ingresso PC: 3 x 2 Cinch L/R 1VRMS (YUV/FBAS), YC, PC/VGA Uscita stereo: 2 x Cinch (LINE
Índice Introdução ........................................................................................................................................... 1 Símbolos............................................................................................................................................... 2 Instruções importantes...................................................................................................................... 3 Instruções de segurança ...............................
Índice Formatos de imagem para fontes AV (TV, CVBS, YC, SCART1, SCART2, HDMI1, HDMI2) ...40 Formatos de imagem para fontes VGA ......................................................................................41 Definições do som avançadas ............................................................................................................42 Definição equalizador do utilizador .............................................................................................44 Videotexto .............
Introdução Neste manual irá encontrar informações importantes necessárias para colocar em funcionamento o seu aparelho de televisão. A LCD-TV oferece inúmeras possibilidade de ligação para leitores de DVD, videogravadores, câmaras de filmar, etc. Independentemente da imagem ser emitida pela televisão ou pelo aparelho de vídeo, a mesma é apresentada perfeitamente nítida e livre de distorção em toda a superfície totalmente plana do ecrã.
MYRICA VQ32-1 / MYRICA VQ40-2 Símbolos Neste manual são utilizados os seguintes símbolos: ! i Representa instruções que, se não forem cumpridas, colocam em risco a saúde, o funcionamento do seu aparelho de televisão ou a segurança dos dados. Os danos causados no aparelho de televisão devido a não observância destes avisos implicam a perda da garantia. Representa informações importantes sobre a utilização correcta do sistema. ► Representa um passo de trabalho que deve ser executado.
MYRICA VQ32-1 / MYRICA VQ40-2 Instruções importantes Neste capítulo encontra instruções de segurança que devem ser observadas no manuseamento do aparelho de televisão. ! i i Evite a apresentação de imagens paradas no ecrã durante muito tempo, por exemplo, imagens paradas de vídeos, símbolos de estações emissores ou similares (no máximo 1 hora).
MYRICA VQ32-1 / MYRICA VQ40-2 ● Preste atenção para que não entrem objectos (por exemplo, fios, clipes de escritório, etc.) ou líquidos para o interior do aparelho (perigo de choque eléctrico, curto-circuito). ● Não é permitida a colocação de objectos que contenham líquidos como, por exemplo, vasos, sobre o aparelho. O aparelho não é resistente à água! Proteja o aparelho contra eventuais salpicos de água (chuva, água salgada).
MYRICA VQ32-1 / MYRICA VQ40-2 Condições desfavoráveis podem provocar um zumbido na LCD-TV. Em geral, o zumbido reside na alimentação eléctrica e pode ter origem na ligação de diferentes condutores de protecção. Pode resolver o problema, ligando um chamado filtro de isolamento entre o cabo de antena de entrada e a entrada de antena no ecrã. O filtro de isolamento pode ser adquirido no comércio da especialidade sob a forma de uma ficha de interligação.
MYRICA VQ32-1 / MYRICA VQ40-2 Limpeza Antes de começar com a limpeza, desligue o aparelho e retire a ficha da tomada eléctrica. Limpeza do ecrã ● Para a limpeza do ecrã utilize um produto de limpeza suave e um pano macio. ● O produto de limpeza não pode conter cetonas (por ex., acetona) nem álcool etílico.
MYRICA VQ32-1 / MYRICA VQ40-2 No caso de avarias Retire a ficha da tomada, se o aparelho tiver sofrido danos. Retire imediatamente a ficha da tomada se começar a sair fumo do aparelho ou se este começar a produzir mau cheiro ou ruídos estranhos. Proceda da mesma forma, se após ser ligado ou durante o funcionamento o aparelho não apresentar ou deixar de apresentar imagem. Não tente continuar a utilizar o aparelho nestas condições.
MYRICA VQ32-1 / MYRICA VQ40-2 Verificação do fornecimento A superfície do ecrã do aparelho de televisão é sensível à pressão e a riscos. Por este motivo, pegue sempre no aparelho pela caixa. ! ► Desembale todas as peças. ► Verifique se o conteúdo da embalagem não apresenta danos visíveis devido ao transporte. ► Verifique se o equipamento fornecido corresponde ao indicado na guia de remessa.
MYRICA VQ32-1 / MYRICA VQ40-2 Ligações na LCD-TV 1= 2= 3= 4= 5= 6= 7= 8= 9= 10 = 11 = LINE OUT SUB LINE OUT L/R ANTENNA YUV / Y (Component Y), CVBS YUV / U (Component Pb) YUV / V (Component Pr) SCART 2 (YC, CVBS) SCART 1 (RGB, CVBS) DIG OUT VGA AUDIO IN RS-232 A26361-K1139-Z120-1-M119, edição 1 12 = 13 = 14 = 15 = 16 = 17 = 18 = 19 = 20 = HDMI 1 HDMI 2 VGA S-VIDEO Entrada áudio S-VIDEO L Entrada áudio S-VIDEO R Entrada áudio YUV/CVBS L Entrada áudio YUV/CVBS R Interruptor de ligar/desligar (apenas no
MYRICA VQ32-1 / MYRICA VQ40-2 Segue-se uma descrição das várias ligações: Ligação Descrição LINE OUT SUB Ligação para o Subwoofer activo LINE OUT L/R Por ex., ligação para o amplificador áudio ou gravador de DVD ANTENNA Ligação para o sinal de antenas de televisão (antena terrestre analógica ou ligação por cabo) Ligações para sinais de entrada Component YUV / Y (Component Y), CVBS YUV / U (Component Pb) por ex.
MYRICA VQ32-1 / MYRICA VQ40-2 Elementos de comando na LCD-TV Os elementos de comando da LCD-TV encontram-se na parte inferior do aparelho. As funções dos botões no aparelho correspondem às dos botões do telecomando.
MYRICA VQ32-1 / MYRICA VQ40-2 Telecomando Para poder controlar a LCD-TV com o telecomando, a ficha tem de estar inserida na tomada e o interruptor de ligação à corrente tem de estar ligado. O telecomando de infravermelhos só funciona se não existirem obstáculos entre o comando e o sensor de infravermelhos, localizado na parte da frente da LCD-TV (em baixo, do lado direito). O alcance do telecomando é aprox. 6m. O alcance do telecomando é reduzido quando as pilhas estão fracas.
MYRICA VQ32-1 / MYRICA VQ40-2 Perspectiva geral do telecomando 1 = POWER Liga o aparelho ou coloca-o no modo Standby 2 = TV Permite mudar para o modo TV 3 = VIDEO Permite mudar para o modo Vídeo Permite alternar entre as fontes de vídeo 4 = PC Permite seleccionar a ligação de PC como fonte de entrada 5 = 0 – 9 Botões dos números Modo TV: Selecção do canal Modo videotexto: Selecção de uma página de videotexto 6= i Mostra as informações sobre a fonte actual 7 = LIST Modo TV: Abre a vista geral dos programas
MYRICA VQ32-1 / MYRICA VQ40-2 13 = PIP Activa o modo PIP Permite alternar entre os formatos PIP (PIP/Split Screen) 14 = XW PIP/F2) Permite trocar a imagem principal e a imagem mostrada no modo PIP. 15 = P-POS Deslocar a posição da imagem pequena PIP 16 = P-SIZE Modificar o tamanho da imagem PIP 17 = SOURCE/F4 Abrir o menu de selecção “Entradas“ (fontes) 18 = HOLD/FREEZE Cria uma imagem parada da cena em movimento. Modo videotexto: Parar a mudança automática de página.
MYRICA VQ32-1 / MYRICA VQ40-2 26 = /MIX Ajustar o Sleep Timer. Modo videotexto: Funcionamento misto (Imagem TV/Videotexto) Preparar o telecomando ► Abra a tampa do compartimento das pilhas. ► Coloque as duas pilhas (AAA), incluídas no fornecimento, no respectivo compartimento. Preste atenção à marcação da polaridade (+) e (-) no fundo do compartimento das pilhas. ► Feche a tampa do compartimento das pilhas.
MYRICA VQ32-1 / MYRICA VQ40-2 Instalar a LCD-TV Preparação Direcção de visionamento Apesar do amplo ângulo de visionamento, a LCD-TV oferece o melhor desempenho com uma direcção de visionamento vertical directa. ► Oriente a LCD-TV na direcção de visionamento mais frequentemente utilizada. Local de instalação ! Não instale o aparelho em frente a janelas ou outras fontes de luz para evitar os reflexos de luz.
MYRICA VQ32-1 / MYRICA VQ40-2 ► Coloque a LCD-TV sobre uma base horizontal estável. O substrato tem de ser robusto e possuir capacidade de suporte estático suficiente. ► Antes da montagem, certifique-se de que a LCD-TV está desligada e que o cabo de alimentação e o cabo de sinalização estão desconectados.
MYRICA VQ32-1 / MYRICA VQ40-2 ! A LCD-TV só pode ser montada em paredes verticais. O material de fixação tem de ser capaz de suportar 3 vezes o peso do aparelho. Se necessário, consulte um instalador qualificado. Para a nova montagem do pé da mesa só pode utilizar o material de fixação original. ► Antes da montagem, verifique se a capacidade de suporte da parede é adequada para suportar o triplo do peso da LCD-TV (vide o peso no capítulo “Características técnicas”).
MYRICA VQ32-1 / MYRICA VQ40-2 1= Aberturas para os ganchos de fixação ► Monte 2 ganchos de fixação (1) (as buchas e os ganchos de fixação não fazem parte do âmbito de fornecimento) na horizontal e observando a devida distância (vide distância no capítulo "Medidas dos furos") . ► Posicione a LCD-TV, de modo a que os ganchos de fixação possam ser introduzidos nas aberturas previstas para o efeito na parte de trás do aparelho.
MYRICA VQ32-1 / MYRICA VQ40-2 Medidas dos furos LCD TV MYRICA VQ32-1 20 - Português A26361-K1139-Z120-1-M119, edição 1
MYRICA VQ32-1 / MYRICA VQ40-2 LCD TV MYRICA VQ40-1 A26361-K1139-Z120-1-M119, edição 1 Português - 21
MYRICA VQ32-1 / MYRICA VQ40-2 Ligar a antena ► Se desejar conectar uma ligação por cabo ou antena terrestre (analógica), utilize a tomada ANTENNA. Ligar o cabo de alimentação 22 - Português ► Conecte o cabo de alimentação à tomada da entrada de alimentação eléctrica na LCD-TV e a ficha a uma tomada. ► Ligue o interruptor de ligação à corrente (apenas no VQ40-2), na parte de trás da LCD-TV, colocando-o na posição “I”. A LCD-TV encontra-se, agora, em Standby e pode ser ligada com o telecomando.
MYRICA VQ32-1 / MYRICA VQ40-2 Primeira instalação Após a primeira ligação da LCD-TV, tem de definir o idioma e o país. A seguir tem início a pesquisa automática de estações emissoras. Definir o idioma ► A26361-K1139-Z120-1-M119, edição 1 Seleccione com o botão S ou T o seu idioma. Prima o botão MENU.
MYRICA VQ32-1 / MYRICA VQ40-2 Seleccionar o país para a sequência de ordenação 24 - Português ► Com o botão S ou T seleccione o país em que a LCD-TV vai ser utilizada. Esta definição determina uma sequência de ordenação dos canais de televisão específica do país. ► Prima o botão MENU. A pesquisa automática de estações emissoras tem início agora. ► Se desejar cancelar a pesquisa automática de estações emissoras, prima o botão vermelho.
MYRICA VQ32-1 / MYRICA VQ40-2 Operação Ligar e desligar o aparelho 1= 2= ► Indicador de funcionamento (Power On) (azul) Indicador de prontidão operacional (Standby) (cor de laranja) Sensor IR para o telecomando / Menu Para ligar a LCD-TV prima o botão POWER/MENU no telecomando ou o botão MENU no aparelho. O indicador Power On / Standby na LCD-TV acende com luz azul. ► Para desligar a LCD-TV prima o botão POWER no telecomando. O indicador Power On / Standby na LCD-TV acende com luz cor de laranja.
MYRICA VQ32-1 / MYRICA VQ40-2 Mudar de canal (mudar de programa) ► Seleccione o modo TV premindo o botão TV no telecomando. ► Prima o botão PS para andar para frente no número de programa. ► Prima o botão PT para andar para trás no número de programa. ► Seleccione um número de programa directamente, premindo os botões 0...9. Com a vista geral dos programas no menu OSD. ► Prima o botão LIST no telecomando para visualizar a vista geral dos programas no ecrã.
MYRICA VQ32-1 / MYRICA VQ40-2 Ajustes do volume e do som Com os botões VOL S / VOL T no telecomando. O botão ► Prima o botão VOL X para aumentar o volume. ► Prima o botão VOL W para diminuir o volume. no telecomando permite cortar o som. para cortar o som. ► Prima o botão ► Prima novamente o botão para repor o som. Para o efeito também pode utilizar o tecla VOL X.
MYRICA VQ32-1 / MYRICA VQ40-2 Ecrã dividido (Split Screen) Imagem principal ► Imagem secundária Prima novamente o botão PIP no telecomando. A imagem grande e pequena seleccionadas por último são apresentadas lado a lado. ► Alterne entre imagem principal e secundária (imagem em imagem) com o botão XW PIP ou F2 no telecomando ou no ponto do menu Mostrador - Trocar PIP X.
MYRICA VQ32-1 / MYRICA VQ40-2 Possibilidades de combinação da fonte com fonte PIP = fonte combinável com fonte PIP - = fonte não combinável com fonte PIP Fonte Fonte PIP Sinton SCART1 izador SCART2 CVBS YC YUV VGA HDMI1 HDMI2 HDMI1 - - HDMI2 - - Sintoniz ador - - - - - - - SCART1 - - - - - - - SCART2 - - - - - - - CVBS - - - - - - - YC - - - - - - - YUV - - - - - - - VGA - - - - - - - i Se não houver sinal na fonte PIP seleccionada, a
MYRICA VQ32-1 / MYRICA VQ40-2 Comando através do menu OSD Seguem-se as definições gerais que podem ser feitas no menu OSD. ► Prima o botão MENU para visualizar o menu principal no ecrã. ► Seleccione com o botão S ou T um ponto do menu e prima o botão X. ► Repita este procedimento até obter o ponto do menu desejado. Os pontos do menu seleccionados são marcados com uma barra azul. Os pontos do menu com um submenu ou que podem ser directamente executados estão identificados com X.
MYRICA VQ32-1 / MYRICA VQ40-2 ► Seleccione o país com o botão X ou W. ► Seleccione Modo de pesquisa com o botão S ou T. ► Seleccione o modo de pesquisa com o botão X ou W. Tem duas opções à escolha: Todos os programas e novos programas. ► Seleccione Iniciar busca com o botão S ou T e prima o botão X. Pesquisa manual de estações emissoras ► ► Prima o botão MENU para abrir o menu principal. ► Seleccione com o botão S ou T o menu Setup e prima o botão X.
MYRICA VQ32-1 / MYRICA VQ40-2 Dependendo da norma de cor, tem três opções à escolha: ● Com a norma de cor PAL: B/G, D/K e I ● Com a norma de cor SECAM: B/G, D/K e L ► Seleccione Norma cor com o botão S ou T. ► Seleccione uma norma de cor (PAL ou SECAM) com o botão X ou W. ► Seleccione Decoder, vide o capítulo "Definir um descodificador". Alterar os nomes dos canais ► Seleccione Nomecom o botão S ou T e prima o botão X. A posição do primeiro carácter é seleccionada.
MYRICA VQ32-1 / MYRICA VQ40-2 Tem as seguintes opções à escolha: Descodificador Canal de TV Som Imagem Normal não codificado não codificado Descodificador A SCART1 não codificado codificado Descodificador B SCART1 codificado codificado Descodificador A SCART2 não codificado codificado Descodificador B SCART2 codificado codificado Editar vista geral dos programas Segue-se uma descrição de como pode alterar a sequência dos canais de televisão memorizados ou apagá-los da vista geral dos prog
MYRICA VQ32-1 / MYRICA VQ40-2 O menu Editar Estação lista é mostrado no ecrã. Ordenar ► Seleccione com os botões STXW o programa que pretende mudar. ► Prima o botão amarelo. O programa é marcado de amarelo. ► Mude o programa com os botões STXW para a posição desejada. ► Prima novamente o botão amarelo no telecomando. Apagar um programa ► Seleccione com os botões STXW o programa que pretende apagar. ► Prima o botão verde para apagar o programa seleccionado da vista geral dos programas.
MYRICA VQ32-1 / MYRICA VQ40-2 Tempo de espera No ponto do menu pode alterar a duração de apresentação (tempo após a última actuação até à ocultação) do menu OSD. ► Seleccione Tempo desligado com o botão S ou T. Tem as seguintes opções à escolha: Desligado; 5, 10, 15, 20, 25 e 30 segundos. Transparente A função "Transparente" oferece a possibilidade de alterar a transparência do menu OSD. ► Seleccione Transparente com o botão S ou T.
MYRICA VQ32-1 / MYRICA VQ40-2 A definição depende do idioma definido do videotexto utilizado. Para a Europa Ocidental utiliza a opção WEST. ► Para fechar o menu, prima o botão vermelho (M). Definições da imagem Após a primeira instalação ou após a reposição das definições de fábrica, os valores no menu Imagem são valores predefinidos. Tal como se descreve a seguir, pode personalizar estes valores em função das suas preferências pessoais e da localização da LCD-TV, bem como incidência da luz associada.
MYRICA VQ32-1 / MYRICA VQ40-2 Nitidez ► Seleccione Nitidez com o botão S ou T. ► Prima a tecla X. A nitidez da imagem é aumentada. Prima a tecla W. ► A nitidez da imagem é diminuída. Cor ► Seleccione Cor com o botão S ou T. ► Prima a tecla X. A saturação da cor é aumentada. Prima a tecla W. ► A saturação da cor é diminuída. Tonalidade O ajuste da cor só é possível com NTSC. Balanço da cor Seleccione balanço da cor com o botão S ou T.
MYRICA VQ32-1 / MYRICA VQ40-2 Foto CD i Esta opção não está disponível com TV e HDMI. O ponto do menu Foto CD destina-se especificamente para a reprodução de imagens paradas, por exemplo, de CD com imagens ou CD com fotografias. ► Para fechar as definições da imagem, prima o botão vermelho. Para fontes VGA i No presente manual, o termo "PC" é utilizado para identificar aparelhos com a interface de PC "VGA". ► Prima o botão MENU para abrir o menu principal.
MYRICA VQ32-1 / MYRICA VQ40-2 Nitidez ► Seleccione Nitidez com o botão S ou T. ► Prima a tecla X. A nitidez da imagem é aumentada. Prima a tecla W. ► A nitidez da imagem é diminuída. Balanço da cor Seleccione balanço da cor com o botão S ou T. ► Tem as três opções seguintes à escolha: Normal, frio e quente. Seleccione a opção desejada com o botão W ou X. ► Ajustar a imagem Seleccione Imagem ajustar com o botão S ou T. ► Tem as três opções seguintes à escolha: Normal, clara e escura.
MYRICA VQ32-1 / MYRICA VQ40-2 Formatos de imagem para fontes AV (TV, CVBS, YC, SCART1, SCART2, HDMI1, HDMI2) i Para HDMI1 e 2 as definições do formato de imagem são válidas se Overscan estiver ligado. Overscan pode ser ligado/desligado através do Menu – Mostrador – Overscan. Se Overscan estiver desligado, são possíveis as definições do formato de imagem, tais como nas fontes VGA. ► Prima o botão MENU para abrir o menu principal. ► Seleccione com o botão S ou T o menu Mostrador e prima o botão X.
MYRICA VQ32-1 / MYRICA VQ40-2 Formato de imagem Descrição 14:9 Com o zoom 14:9, a imagem é aumentada verticalmente cerca de 15 % no total, ou seja, aprox. 15 % do conteúdo da imagem na vertical é cortado. Horizontalmente, a imagem é reduzida em cerca de 15 %, em comparação com a apresentação no ecrã total, ou seja, é apresentada uma barra preta estreita, respectivamente do lado esquerdo e do lado direito. 14:9 Top Imagem no formato 14:9 Letterbox com legendas.
MYRICA VQ32-1 / MYRICA VQ40-2 Formato de imagem Descrição Normal Apresenta a imagem do PC de forma a preencher todo o ecrã, sem alterar o formato. Nas margem esquerda e direita do ecrã aparecem barras escuras, em função do formato de entrada da imagem do PC. Ecrã total Nesta definição do formato, a imagem é adaptada na horizontal e na vertical, de modo a ser sempre apresentada uma imagem que preenche todo o ecrã. One to One Nesta definição o número de pixels do ecrã é adaptado ao sinal de entrada.
MYRICA VQ32-1 / MYRICA VQ40-2 Definição do som Descrição Volume Indicação do volume actualmente regulado. Balanço Balanço entre os altifalantes esquerdo e direito. ► Prima o botão X para diminuir o nível de volume no altifalante esquerdo ► Prima o botão W para diminuir o nível de volume no altifalante direito Equalizador Tem as seguintes opções (amostras) à escolha: Clássica, Flat, Jazz, Rock, Pop, Voz; utilizador (vide o capítulo "Definição equalizador do utilizador").
MYRICA VQ32-1 / MYRICA VQ40-2 Definição equalizador do utilizador ► Para realizar definições no menu Equalizador do utilizador, tem de seleccionar no ponto do menu Equalizador a opção Utilizador e depois da selecção do ponto do menu Equalizador do utilizador activar o menu com o botão X. Aqui pode ajustar o nível das diferentes frequências às suas necessidades pessoais. ► Seleccione com o botão S ou T a frequência desejada. ► Prima o botão X para destacar a frequência seleccionada.
MYRICA VQ32-1 / MYRICA VQ40-2 Aumentar a apresentação do videotexto ► Prima o botão FORMAT várias vezes para aumentar a apresentação do videotexto para a parte superior ou inferior. ► Se voltar a premir, voltará à apresentação normal. Mostrar informações ocultas ► Prima o botão LIST para ligar/desligar informações ocultas, por ex., sobre a forma de aceder a páginas de passatempos.
MYRICA VQ32-1 / MYRICA VQ40-2 Ligar aparelhos externos Ligar a SCART1/SCART2 Ao SCART1 e SCART2 pode ligar aparelhos externos, tais como: leitores de DVD, gravadores de DVD, videogravadores, caixas codificadoras/descodificadoras (Set Top Box) e câmaras de vídeo. SCART1 dispõe adicionalmente da possibilidade de ligar fontes RGB. SCART2 dispõe adicionalmente da possibilidade de ligar fontes YC.
MYRICA VQ32-1 / MYRICA VQ40-2 Definição Descrição TV SCART A função tem de estar definida para Ligar, se se pretender que ao conectar-se um aparelho a SCART1 ou SCART2 a comutação para a entrada SCART correspondente seja automaticamente feita. ● SCART: Se um aparelho externo aplicar uma tensão de comutação no pino 16, a LCD-TV comuta automaticamente para o sinal RGB presente. Caso contrário, não é reproduzido um sinal CVBS.
MYRICA VQ32-1 / MYRICA VQ40-2 Ligar à entrada S-Video À S-VIDEO pode ligar aparelhos externos, tais como leitores de DVD, gravadores de DVD e câmaras de vídeo com uma saída de vídeo S. Para o sinal áudio deve utilizar as entradas SVIDEO (L/R). Ligar à entrada CVBS À CVBS pode ligar aparelhos externos, tais como leitores de DVD, gravadores de DVD e câmaras de vídeo com uma saída CVBS. Para o sinal áudio deve utilizar as entradas YUV / CVBS (L/R).
MYRICA VQ32-1 / MYRICA VQ40-2 Ligar à entrada VGA Para ligar um aparelho com interface VGA, utilize a entrada VGA. ► Prima o botão SOURCE ou F4 para abrir o menu de selecção . ► Seleccione com botão S ou T a entrada e prima o botão vermelho (M). Ou ► Seleccione a entrada VGA com o botão PC. Definições para VGA (RGB) A26361-K1139-Z120-1-M119, edição 1 ► Prima o botão MENU para abrir o menu principal. ► Seleccione com o botão S ou T o menu Setup e prima o botão X.
MYRICA VQ32-1 / MYRICA VQ40-2 Definição Descrição Instalação automática ► Prima o botão X para iniciar a instalação automática. A função vai agora tentar encontrar as definições de imagem optimizadas para o sinal presente. Durante a definição a imagem movese ligeiramente para um lado e para o outro. Total H Pos. V Aqui pode corrigir a frequência de varrimento para a imagem VGA. Esta função destina-se apenas a utilizadores com conhecimentos mais avançados.
MYRICA VQ32-1 / MYRICA VQ40-2 Seleccionar entradas Para a selecção utilize uma entrada do menu de selecção Entradas. A26361-K1139-Z120-1-M119, edição 1 ► Prima o botão SOURCE ou F4 para abrir o menu de selecção Entradas. ► Seleccione com botão S ou T a entrada e prima o botão vermelho (M).
MYRICA VQ32-1 / MYRICA VQ40-2 Tratamento de falhas Se surgir uma falha, verifique em primeiro lugar os pontos mencionados de seguida. Se não conseguir resolver os erros de imagem através dos pontos indicados, tente, se possível, experimentar a LCD-TVcom outra fonte de sinal. Se não conseguir resolver o problema, entre em contacto com o nosso Help Desk. ! Se as instruções indicadas não permitirem resolver o erro, desligue o aparelho no interruptor de ligação à corrente e retire a ficha da tomada.
MYRICA VQ32-1 / MYRICA VQ40-2 As cores são apagadas ou demasiado intensas Causa Resolução de falhas A cor não está correctamente definida. ► Defina a cor no ponto do menu Imagem. O cabo de ligação não está correctamente conectado. ► Conecte o cabo de ligação correctamente. A imagem está cortada ou não é apresentada de modo centrado Causa Resolução de falhas A posição da imagem não está correctamente definida. ► Corrija a posição da imagem. Utilize a função de instalação automática.
MYRICA VQ32-1 / MYRICA VQ40-2 A imagem apresentada é demasiado escura Causa Resolução de falhas A qualidade da imagem não está correctamente definida. ► Corrija a luminosidade e o contraste da imagem no ponto do menu Imagem. Há imagem, mas não há som Causa Resolução de falhas O som está desligado (cortado). ► Prima o botão Volume regulado para o mínimo. ► Aumente o volume. no telecomando.
MYRICA VQ32-1 / MYRICA VQ40-2 Características técnicas Ecrã MYRICA VQ32-1 Ecrã Diagonal 81 cm (32") Formato de imagem 16:9 Tamanho de imagem passível de reprodução 697 mm (horizontal) x 392 mm (vertical) Resolução 1366 x 768 pixels Cores 16,7 milhões de cores Normas de vídeo Vídeo PAL/SECAM/NTSC Sintonizador de TV PAL (BG, DK, I) SECAM (BG, DK, L) 47-861 MHz (VHF, UHF, Hyperband) PALplus, Cinescope Formatos Detecção automática do formato (adapta imagem ao tamanho do ecrã) 4:3 16:9 (Top) 14:9
MYRICA VQ32-1 / MYRICA VQ40-2 Entradas/saídas/sincronização Entrada de PC/Vídeo Detecção de sincronização automática e analógica RGB Ligações vídeo Sintonizador de TV: IEC, resistência de entrada de 75 Ohm SCART 1: RGB, entrada FBAS, saída FBAS SCART 2: YC, entrada FBAS, saída FBAS Y/C: MiniDIN (HOSIDEN) YUV (FBAS): 3 x Cinch (HDTV) FBAS: 1 x Cinch (Y) HDMI1 / 2: Video/Audio (HDTV) digital - HDCP Ligação de PC analógica/digital VGA: RGB analógico Ligações áudio Altifalantes integrados:
MYRICA VQ32-1 / MYRICA VQ40-2 Ecrã MYRICA VQ40-2 Ecrã Tamanho / diagonal 101 cm (40") Formato de imagem 16:9 Tamanho de imagem passível de reprodução 885 mm (horizontal) x 497 mm (vertical) Resolução 1366 x 768 pixels Cores 16,7 milhões de cores Normas de vídeo Vídeo PAL/SECAM/NTSC Sintonizador de TV PAL (BG, DK, I) SECAM (BG, DK, L) 47-861 MHz (VHF, UHF, Hyperband) PALplus, Cinescope Detecção automática do formato (adapta imagem ao tamanho do ecrã) Formatos 4:3 16:9 (Top) 14:9 (Top) Panor
MYRICA VQ32-1 / MYRICA VQ40-2 SCART 1: RGB, entrada FBAS, saída FBAS SCART 2: YC, entrada FBAS, saída FBAS Y/C: MiniDIN (HOSIDEN) YUV (FBAS): 3 x Cinch (HDTV) FBAS: 1 x Cinch (Y) HDMI1 / 2: Video/Audio (HDTV) digital - HDCP Ligação de PC analógica/digital VGA: RGB analógico Ligações áudio Altifalantes integrados: 4 x largura de banda Entrada estéreo: 3 x 2 Cinch L/R 1VRMS (YUV/FBAS), YC, PC/VGA Saída estéreo: 2 x Cinch (LINE OUT L/R) Subwoofer activo: 1 x Cinch (LINE OUT SUB) Saída