Operating Manual

Main menu - Making system settings BIOS Setup
A26391-K84-Z100-1-7619
43
Main menu - Making system settings
In the
Main
menu you can set up the following:
•
time (in the field marked
Time
)
•
date (in the field marked
Date
)
•
hard disk settings (in the two fields marked
IDE Adapter
)
•
display device (in the field marked
Display Device Selection)
•
Pointing elements (in the field marked
PS/2 Pointing Device
)
•
System startup options (in the field marked
Boot Options
)
Phoenix BIOS Setup
Main
Advanced Security Power Docking Boot Exit
System Time: [08:00:00]
System Date: [08/14/1998]
Diskette A: [1.44M, 3 ¤ ]
² IDE Adapter 0 Master (C: 810 MB)
² IDE Adapter 1 Master [None]
Display Device Selection: [LCD & CRT]
TV Mode: [PAL]
² Boot Options
System Memory: 640 KB
Extended Memory: 15 MB
Item Specific Help
——————————————————————
F1 Help
↑↓
Select Item Space Change Values F9 Setup Defaults
ESC Exit
← →
Select Menu Enter Select ² Sub-Menu F10 Previous Values
Example for
Main
menu
System Time/System Date
System Time
indicate the time of the device. If you change the time setting, enter the time in the
format
HH:MM:SS
(hours:minutes:seconds)
System Date
indicate the date of the device. If you change the date setting, enter the date in the
format
MM.DD.YYYY
(month/day/ year)
Diskette A: - floppy disk drive
This field shows the type of the built-in floppy disk drive.
360KB
-
5 1/4", 720KB
-
3 1/2", 1.2MB
-
51/4", 1.44MB
-
3 1/2"
,
2.88MB
-
3 1/2"
The entry depends on the floppy disk drive installed.
Not Installed
A floppy disk drive is not installed.