Operating Manual

BIOS Setup Security menu - Setting up the security features
58
A26391-K84-Z100-1-7619
Hard Disk Security - Setting hard disk passwords
This field calls the submenu to make the settings for the hard disk passwords.
Phoenix BIOS Setup
Security
Hard Disk Security Item Specific Help
HD1 Password is: Disabled
Set HD1 password: [Press Enter]
F1 Help
↑↓
Select Item Space Change Values F9 Setup Defaults
ESC Exit
← →
Select Menu Enter Select ² Sub-Menu F10 Previous Values
Example for submenu
PCI Devices
HD1 Password is
Disabled, Enabled
This field indicates whether the appropriate password is installed or not.
Set HD1 password
This field enables you to install the hard disk password. The hard disk password only applies to the
hard disk in the notebook and not the one in the MobiDock. If a hard disk password has already been
set, you must enter the set password before you can change or delete it.
Password on boot - Password query during system startup
Requirement: the supervisor password or user password must be installed.
This field is used to specify whether the password is to be queried when the operating system is
booted.
Disabled
The password is queried only when
BIOS Setup
is called.
Enabled
The password is queried before the operating system is booted and when
BIOS Setup
is
called.
Diskette access - Access privilege for disk drive
This field is used to specify whether diskettes can be accessed.
User
Both users and the supervisor can access diskettes.
Supervisor
Only a supervisor can access diskettes.
Flash update - Permission for BIOS update
This field specifies whether a BIOS flash update may be carried out on the notebook.
Disabled
BIOS flash update not possible.
Enabled
BIOS flash update is permitted.