Operating Manual

BIOS Setup Power menu - Setting energy saving functions
62
A26391-K84-Z100-1-7619
Suspend Mode
This field specifies where the system state is saved when the device is switched to suspend mode.
Save to DRAM
The system state is buffered in the DRAM memory.
Save to Disk
The system state is saved to the hard disk, the system is switched off.
Resume On Modem Ring - Switching on for modem ring
This field specifies whether the notebook is booted when a call is made to the connected modem.
This field can be operated only if Suspend Mode is set to
Save to DRAM
.
OFF
The function is disabled.
ON
The function is enabled.
Resume On Time - Switching on at a fixed time
This field specifies whether the notebook is booted at a specific time. The time is set in the
Resume Time
field.
This field can be operated only if Suspend Mode is set to
Save to DRAM
.
OFF
The function is disabled.
ON
The function is enabled.
Resume Time - Setting the switch-on time
This field specifies whether the notebook is booted at a specific time.
This field can only be set if the
Suspend Mode
is set to
Save to DRAM
and the
Resume On Time
field is set
to
ON
.
Cooling Control - Cooling mode
This field defines the cooling mode.
Performance
When a certain temperature limit is exceeded in the system, the integrated fan is
switched on first. If the temperature nevertheless continues to increase, the clock
frequency of the processor is also reduced.
Silence
First the clock frequency of the process is reduced, then the integrated fan is switched
on.