Operating Manual
Table Of Contents
- Title
- Contents
- Introduction
- Important notes
- Preparation for use and operation
- Unpacking and checking the delivery
- Preparing the PC for use
- Setting up the PC
- Connecting devices
- Connecting the PC to the line voltage
- Unlocking/locking the system unit
- Switching the PC on and off
- Indicators on the system unit
- Keyboard
- Working with floppy disks
- Settings in BIOS Setup
- Property and data protection
- Troubleshooting and tips
- System expansions
- Technical data
- Index
Preparation for use and operation Keyboard
20
A26361-K516-Z100-1-7619
6 - Power-on indicator
−
green:
The System unit is on.
−
orange:
The System unit is ready-to-operate.
In this mode the PC consumes very little power and can be switched on at the ON/OFF
switch. If the remote-on function is
Enabled
in the
BIOS Setup
, the system unit can be
switched on by an incoming message (e. g. fax, telephone call).
−
flashes green/orange:
The indicator only flashes on systems which support the ACPI function
(A
dvanced
C
onfiguration and
P
ower
I
nterface).
The system unit is in the energy-saving mode (standby). After being switched on with the
ON/OFF switch, the PC returns to the state it was in before the energy-saving mode. In
the energy-saving mode the system unit may not be switched off with the main switch or
disconnected from the mains supply, as this may otherwise result in data loss.
−
does not glow:
The system unit is switched off.
Keyboard
1
34
5
2
1 = function keys
2 = ON/OFF switch (optional)
3 = alphanumeric keypad
4 = cursor control keys
5 = numeric keypad (calculator keypad)