Operating Manual
Table Of Contents
- Title
- Contents
- Introduction
- Important notes
- Preparation for use and operation
- Unpacking and checking the delivery
- Preparing the PC for use
- Setting up the PC
- Connecting devices
- Connecting the PC to the line voltage
- Unlocking/locking the system unit
- Switching the PC on and off
- Indicators on the system unit
- Keyboard
- Working with floppy disks
- Settings in BIOS Setup
- Property and data protection
- Troubleshooting and tips
- System expansions
- Technical data
- Index
Installing and removing drives System expansions
A26361-K516-Z100-1-7619
35
²
Take the new drive out of its packaging.
²
Make the required settings on the drive (if necessary, on installed drives as well).
3
1
2
²
Slide the drive into the system unit (1).
²
Plug the connectors of the data cable and the power supply cable into the drive (2).
²
Fasten the drive with the screws (3).
²
Close the system unit (see "Assembling the system unit").
i
If necessary, you must adapt the entry for the drive in the Setup menu.