Operating Manual
Table Of Contents
- Title
- Contents
- Introduction
- Important notes
- Preparation for use and operation
- Unpacking and checking the delivery
- Preparing the PC for use
- Setting up the PC
- Connecting devices
- Connecting the PC to the line voltage
- Unlocking/locking the system unit
- Switching the PC on and off
- Indicators on the system unit
- Keyboard
- Working with floppy disks
- Settings in BIOS Setup
- Property and data protection
- Troubleshooting and tips
- System expansions
- Technical data
- Index
Installing and removing drives System expansions
A26361-K516-Z100-1-7619
39
Installing the second hard disk drive
2
2
2
1
²
Take the new hard disk drive out of its
packaging.
²
Make the required settings (e.g.
master/slave, stand alone) on the drives.
²
Slide the hard disk drive into the drive
carrier (1).
²
Fasten the drive with the screws (2).
Removing the first hard disk drive
2
1
²
Lightly press on the clip (1).
²
Pull the hard disk drive out of the
carrier (2).
²
Press on the clip (1).
²
Pull the hard disk drive out of the carrier (2).
1
1
2
²
Fold the plastic bracket in the direction of
the arrow (1).
²
Remove the hard disk drive (2).