Operating Manual
Table Of Contents
- Title
- Contents
- Introduction
- Important notes
- Preparation for use and operation
- Unpacking and checking the delivery
- Preparing the PC for use
- Setting up the PC
- Connecting devices
- Connecting the PC to the line voltage
- Unlocking/locking the system unit
- Switching the PC on and off
- Indicators on the system unit
- Keyboard
- Working with floppy disks
- Settings in BIOS Setup
- Property and data protection
- Troubleshooting and tips
- System expansions
- Technical data
- Index
Extensions on the system board System expansions
A26361-K516-Z100-1-7619
43
Extensions on the system board
Details of how and if you can upgrade the main memory or the processor of your PC are provided in
the Technical Manual for the system board. Below the necessary steps are described to enable you
to work on the system board.
²
Open the system unit (see "Opening the system unit").
Upgrading main memory
²
Upgrade the memory as it is described in the Technical Manual for the system board.
²
Close the system unit (see "Assembling the system unit").
Replacing processor and lithium battery
To replace the processor and the lithium battery, you must remove the ventilation duct.
Removing ventilation duct
2
3
4
1
1
²
Press the clip together (1).
²
Lift the ventilation duct slightly (2) and guide the ventilation duct out of the guide holes (3).
²
Remove the ventilation duct from the unit (4).
You have free access to the locations.