ASUG12LZBS Operation Manual

En-11
12. OPTIONAL PARTS
12.1. Wired remote controller
The optional wired remote controller can be used.
You can use wired and wireless remote controller together.
However, some functions of the wireless remote controller are restricted.
If you set the restricted functions, beeping sound will be heard, [
], [ ],
[ ], and [ ] indicator on the indoor unit will blink.
<Restricted functions for wireless remote controller>
When using together with wired remote controller (2-wire type)
• Weekly timer operation
• Powerful operation
• Outdoor unit low noise operation
• Min. heat operation
You can use wired remote controller and wireless LAN control
together (optional).
However, some operations from the mobile app are restricted.
Multiple remote controller
You can connect two wired remote controllers to one air conditioner.
Either remote controller can control the air conditioner.
However, the timer functions cannot be used by the secondary unit.
Group control
One remote controller can control up to 16 air conditioners. All of the air
conditioners will be operated with the same settings.
You cannot use group control and wireless LAN control together.
12.2. Wireless LAN control
To use the wireless LAN control, the WLAN adapter and mobile
app is necessary.
For how to operate the mobile app, refer to the operation manual of the
mobile app.
Write down the SSID and the PIN code to the following table.
MAC: 
SSID :AP-WF-
PIN: 
Wireless LAN label
Connection port
Information on WLAN adapter
SSID
PIN
Google Play is a registered trademark of Google Inc.
App store is a service mark of Apple Inc., registered in the U.S. and
other countries.
Setting to use wireless LAN control
Step 1. Application software installation
1. Open “Google Play” or “App Store” depending on the type
of your smartphone or tablet PC.
2. Search for “FGLair”.
3. Install the application software (mobile app) following the
instructions on your screen.
Step 2. User registration
1. Open the installed mobile app.
2. Register the user (with either a smartphone or tablet PC)
by following the instructions in the create an account
section of the mobile app.
Step 3. Installing WLAN adapter
CAUTION
• Be sure to turn o󰀨 the power supply of the air
conditioner when installing or removing this product
to avoid the risk of electric shock.
• Do not put  ngers, sticks etc. in the connection part of
this product and the connection slot of the indoor unit.
Otherwise, electric shock or damage to the product
may occur.
• Do not standing on an unstable platform when
installing or removing this product to avoid injury.
1. Be sure to turn air conditioner o󰀨 and to disconnect all the
power supply.
2. Open the intake grille until it snaps.
3. Open the WLAN adapter cover until it snaps.
4. Plug the WLAN adapter into the connection slot of the indoor
unit in the direction as shown in the  gure.
Label side
5. Close the WLAN adapter cover and the intake grille.
9387602210_OM.indb 119387602210_OM.indb 11 25/02/2021 11:23:0325/02/2021 11:23:03