ASUG12LZBS Operation Manual

En-8
8. OTHER OPERATIONS
8.1. Powerful operation
In the Powerful operation, the air conditioner will operate at maximum
power and strong airow to cool down or warm up the room quickly.
)
Press to activate/deactivate the Powerful operation.
When activated, the indoor unit will emit 2 short beeps.
When deactivated, the indoor unit will emit 1 short beep.
The Powerful operation will be turned o󰀨 automatically in the following
situations:
• The Powerful operation runs for a certain amount of time and the
room temperature reaches the set temperature in the Cooling, Dry,
or Heating mode.
• 20 minutes after the Powerful operation has started.
NOTES:
• The airow direction and the fan speed are controlled automatically.
• The Powerful operation cannot be performed simultaneously with
Economy operation.
• The Powerful operation overrides the following operations. If the
following operation is set, they will start after the Powerful operation
nishes.
- Outdoor unit low noise operation
- Energy saving program
• If the wired remote controller (optional) is connected, this function is
restricted.
8.2. Outdoor unit low noise operation
The Outdoor unit low noise operation lowers noise from the outdoor unit.
During this operation, the rotation number of the compressor decreases
and the outdoor unit fan rotates slowly.
)
Press to activate/deactivate the Outdoor unit low
noise operation.
While the Outdoor unit low noise operation is activated,
on the remote controller is displayed.
The setting is preserved even if the air conditioner is turned o󰀨.
NOTES:
• This operation cannot be performed simultaneously with the Fan
mode, Dry mode, and Powerful operation.
• If the wired remote controller (optional) is connected, this function is
restricted.
8.3. Min. (Minimum) heat operation
Min. heat operation maintains the room temperature at 50 °F (10 °C) so
as to prevent the room temperature to drop too low.
)
Press to activate the Min. heat operation.
The indoor unit will emit 1 short beep and [ ] indicator on the
indoor unit will turn on.
)
Press to turn o󰀨 the air conditioner.
[ ] indicator will turn o󰀨.
NOTES:
• During the Min. heat operation, only
and are valid.
• When the room temperature is warm enough, this operation will not
perform.
• If the wired remote controller (optional) is connected, this function is
restricted.
9. SETTINGS ON INSTALLATION
9.1. Remote controller custom code setting
By setting custom code of indoor unit and remote controller, you can
specify the air conditioner which the remote controller controls.
When two or more air conditioners are in the room and you wish to
operate them separately, set the custom code (4 selections possible).
NOTE: If custom codes is di󰀨erent between the indoor unit and the
remote controller, the indoor unit cannot receive a signal from
the remote controller.
How to set the remote controller custom code
1. Press
until only the clock is displayed on the remote
controller display.
2. Press and hold
for more than
5 seconds.
The current custom code will be
displayed (initially set to A).
3. Press
to change the
custom code between A (
) ↔ B ( )
↔ C (
) ↔ D ( ).
* Match the custom code on the display
to the air conditioner custom code.
4. Press
again.
The custom code will be set.
The display will return to the clock display.
• To change the air conditioner custom code, contact an authorized
service personnel (initially set to A).
• If you do not press any buttons for 30 seconds after the custom
code is displayed, the display returns to the clock display. In this
case, repeat the setting from step 2.
• Depending on the remote controller, the custom code may return
to A when replacing the batteries. In this case, reset the custom
code as necessary. If you do not know the air conditioner custom
code, try each code until you nd the code which operates the air
conditioner.
10. CLEANING AND CARE
CAUTION
• Before cleaning this product, be sure to turn it o󰀨 and
disconnect all the power supply.
• Before starting operation, make sure that the intake
grille has been shut completely. Incomplete closing
of the intake grille might have an e󰀨ect on the proper
working or performance of the air conditioner.
• If the lter cleaning involves high-place work, consult
the authorized service personnel.
• Do not touch the aluminum ns of heat exchanger
built-in the indoor unit to avoid personal injury when
you maintain the unit.
• Do not expose the indoor unit to liquid insecticides or
hair sprays.
• Do not stand on slippery, uneven or unstable surfaces
when you maintain the unit.
Air cleaning lters
(Apple catechin lter, Ion deodorization lter)
Intake grille
Air lters
Indoor unit body
9387602210_OM.indb 89387602210_OM.indb 8 25/02/2021 11:23:0125/02/2021 11:23:01