AUU12RLF Installation Manual

En-4
2.4. Accessories
WARNING
For installation purposes, be sure to use the parts
supplied by the manufacturer or other prescribed
parts. The use of non-prescribed parts can cause
serious accidents such as the unit to fall, water leak-
age, electric shock, or  re.
The following installation parts are furnished. Use
them as required.
Keep the Installation Manual in a safe place and do
not discard any other accessories until the installa-
tion work has been completed.
Do not discard any accessories needed for installation
until the installation work has been completed.
Name and Shape Q’ty Application
Operating Manual
1
Installation Manual
1
(This book)
Coupler heat
insulation
(Small)
1
For indoor side pipe
joint (Liquid pipe)
Coupler heat
insulation
(Large)
1
For indoor side pipe
joint (Gas pipe)
Special nut A
(Large  ange)
4
For installing indoor
unit
Special nut B
(Small  ange)
4
For installing indoor
unit
Template
(Carton top)
1
For cealing openings
cutting
Also used as packing
Drain Hose Assy
1
For installing drain pipe
19 mm (3/4 in.) [O.D.
27 mm (1-1/16 in.)]
Hose Band Assy
1
For installing drain pipe
(3/4 in.)
Drain hose insulation
1
For installing drain
hose
Wired Remote
Controller
1
Remote Controller
Cable
1
For connecting the
remote controller
Tapping screw
(M4 × 16 mm) 2
For installing the wired
remote controller
2.5. Optional parts
Parts name Model No. Application
Wireless Remote
Controller
UTY-LNHUM
For air conditioner
operation
Wired Remote
Controller
UTY-RNNUM
For air conditioner
operation
Simple Remote
Controller
UTY-RSNUM
For air conditioner
operation
External connect kit
UTY-XWZX
For control input/
output port
Fresh air intake kit UTZ-VXAA
To take fresh air
2.6. Decoration panel accessories
Name and Shape Q’ty Application
Connector cover
1
For covering connector
Tapping Screw
(M5 × 12 mm)
4
For mounting decora-
tion panel
Tapping Screw
(M4 × 12 mm)
1
For mounting connec-
tor cover
L angle
2
For mounting the Hook
Wire to the Decoration
panel
Hook wire
2
For suspending the
Decoration panel
Screw [pitch small]
(M4 × 10 mm)
2
For mounting the Hook
Wire (for metals)
Screw [pitch large]
(M4 × 10 mm)
4
For mounting the
L angle and Hook wire
(for resins)