Operation Manual

Color monitor 17P3
A26361-K707-Z100-2-5E19 English - 17
CRT
The CRT contains no cadmium
Color characteristics (Color coordinates): Red X=0.620 Y=0.320
Green X=0.305 Y=0.600
Blue X=0.155 Y=0.065
White X=0.283 Y=0.297
Color temperature (color calibration): 9300
K
Gamma value: 2.85
Electrical data
Video: analog, positive, 0.7 V
pp
, 75 Ohm
Synchronization: TTL
Horizontal frequency: 30 kHz .... 96 kHz (multi-scanning)
Refresh rate: 50 Hz .... 160 Hz
Maximum pixel rate: 205 MHz
Power supply: switches automatically
100 V .... 240 V, 50 Hz - 60 Hz
Power consumption:
(see power management):
< 85 W (ON, Normal mode)
< 10 W (Standby mode)
< 10 W (Suspend mode)
< 3 W (OFF mode)
Environmental conditions
Environment class 3K2, IEC 721
Rated range of operation: 15 °C .... 35 °C
Humidity: 20 % .... 85 %
Limit range of operation: 5 °C .... 40 °C
Humidity: 20 % .... 85 %
Condensation must be avoided.
VESA-DDC-compatible VGA interface
Your monitor is equipped with a VESA-DDC-compatible VGA interface. VESA-DDC (Video
Electronics Standard Association, Display Data Channel) is used as the communications interface
between the monitor and the computer. If your computer is equipped with a VESA-DDC-compatible
VGA interface, it can automatically read the data for ensuring optimum operation from your monitor
and select the appropriate settings.
i
If the monitor 17P3 is not yet displayed in the list of monitors, you can select one of the
following monitors instead:
Fujitsu Siemens, Siemens or Siemens Nixdorf
17P2, MCM 17P1, MCM 1707, MCM 1706, MCM 1705, MCM 1702