OPERATION MANUAL MODE D’EMPLOI CLIMATISEUR (Type à montage mural) Avant d'utiliser ce produit, veuillez lire attentivement ces instructions. Conservez ce manuel pour référence future. MANUAL DE FUNCIONAMIENTO ACONDICIONADOR DE AIRE (Tipo montado en pared) Antes de utilizar el producto, lea estas instrucciones detenidamente y conserve este manual para consultarlo en el futuro. MODEL: * Write down the model name. (Refer to the rating label.) * Notez le nom du modèle.
[Original Instructions] Contents WARNING 1. SAFETY PRECAUTIONS.......................................... 1 2. PREPARATION ......................................................... 2 3. NAME OF PARTS ..................................................... 3 3.1. Indoor unit ........................................................ 3 3.2. Remote controller ............................................. 3 3.3. Inserting batteries ............................................. 5 4. BASIC OPERATIONS ..............
CAUTION • • • • • • • • • • • • Do not direct the airflow at fireplaces or heating apparatus. Do not block or cover the intake grille and the outlet port. Do not apply any heavy pressure to radiator fins. Do not climb on, place objects on, or hang objects from this product. Do not place any other electrical products or household belongings under this product. Dripping condensation from this product might get them wet, and may cause damage or malfunction of your property.
3.2. Remote controller 3. NAME OF PARTS CAUTION For appropriate signal transmission between the remote controller and the indoor unit, keep the signal receiver away from the following items: - Direct sunlight or other strong lights - Flat-panel television screen In rooms with instantaneous fluorescent lights, such as inverter type ones, the signal may not be transmitted properly. In such a case, consult the store of purchase.
CAUTION • To prevent malfunction or damage of the remote controller: - Place remote controller at where will not be exposed to direct sunlight or excessive heat. - Remove batteries if the product is not going to be used for an extended period. • Obstacles such as a curtain or wall between the remote controller and the indoor unit may affect the appropriate signal transmission. • Do not apply strong shocks to the remote controller. • Do not pour water on the remote controller. For Powerful operation .......
NOTES: • In the Cooling or Dry mode, set the temperature lower than the current room temperature. • In the Heating mode, - set the temperature higher than the current room temperature. - at the beginning of the operation, the indoor unit fan rotates at very low speed for 3-5 minutes. - the Automatic defrosting operation overrides the Heating operation when necessary. • In the Fan mode, temperature control is not available. 3.3.
NOTES: • Do not adjust the horizontal louvers by hand. • In the Auto or Heating mode, the airflow direction stay position 1 for a while from the start of the operation. • In the Cooling or Dry mode, position 1-3 is recommended to prevent condensation drips damaging your property. If position 4-6 keeps for 30 minutes or more in these modes, the airflow direction changes to position 3 automatically.
7.2. Fan control for energy saving 9. SETTINGS ON INSTALLATION In the Cooling operation, when the room temperature reaches the set temperature, the indoor unit fan rotates intermittently to save power. (This function is deactivated at the time of purchase.) 9.1. Remote controller custom code setting By setting custom code of indoor unit and remote controller, you can specify the air conditioner which the remote controller controls.
What to do Frequency Indoor unit body Cleaning When you notice Air filter Cleaning Every 2 weeks Apple-catechin filter (UTR-FA16) Replacing Every 3 months (White) Ion deodorization filter (UTR-FA16-2) Cleaning (Light blue) Replacing Every 3 months Every 3 years * The air cleaning filters are sold separately. When you replace them, contact the store of purchase. Cleaning indoor unit body NOTES: • Do not use water hotter than 104 °F (40 °C).
Removing and installing intake grille ■ Removing intake grille 11. GENERAL INFORMATION ■ Heating performance 1. Open the intake grille until it snaps. 2. Pull the mounting shafts while keeping the intake grille in a horizontal position. This air conditioner operates on the heat-pump principle, absorbing heat from air outdoors and transferring that heat to the indoor unit. As a result, the operating performance is reduced as outdoor air temperature drops.
■ Emergency heat (Special setting) An auxiliary heater can be used instead of the outdoor unit if the auxiliary heater is connected and the function is set correctly during installation. Consult authorized service personnel to use this function. on the indoor unit for 2 To activate/deactivate this function, Press seconds or less during the Heating operation. (Refer to page 3.) During the Emergency heat operation, [ ] indicator lamp will blink (3 seconds on, 1 second off).
Step 4. Air conditioner registration (pairing of WLAN adapter) NOTES: • Before starting this setting, reconnect the power supply of the air conditioner and wait for 60 seconds or more. • Check that the smartphone or tablet PC is linked to the access point you are connecting the air conditioner. The setting will not work if it is not connected to the same access point. • To control 2 or more air conditioners with the same smartphone or tablet PC, repeat the setup of the chosen mode.
Firmware update 13. TROUBLESHOOTING WARNING CAUTION Do not pull out the power plug nor turn off the circuit breaker during the firmware update of the indoor unit or WLAN adapter. It may cause malfunction. For WLAN adapter The firmware of the WLAN adapter may be updated automatically. During the updating, you cannot operate the air conditioner from the mobile app. It will take for a maximum of 5 minutes. For indoor unit The firmware of the indoor unit may be updated.
Airflow is weak or stops. □ Is the fan speed set to Quiet? ⇒ To change the fan speed, refer to page 5. □ Has the Fan Control for Energy Saving set? In this case, the indoor unit fan may stop temporarily while the Cooling operation. ⇒ To cancel the Fan control for energy saving, refer to page 7. □ Have you just started the operation? In this case, the fan rotates at very low speed temporarily to warm up the internal parts of the unit.
If you cannot operate the air conditioner, the malfunction may occur on the firmware of the indoor unit. Consult authorized service personnel. - Restricted function 10 ■ Manual Auto operation and Filter indicator reset You can operate the air conditioner with (Refer to page 3.) Status on the indoor unit.
