Graphics Tablet User Manual

3-10
Care and Maintenance
Audio Volume Too Low 3
If the audio volume on your pen tablet speaker or external headphones is too low,
check the following:
• Ensure that the speaker (or headphone output if using headphones) is enabled. To
do so, tap the Speaker Mute hotpad. The system beeps when the speaker or
headphone output is turned on using the Speaker Mute hotpad.
• Ensure that the volume level set with the Volume hotpads is set to an audible
level.
• Ensure that the mute box in the system volume control (accessible from the
system tray) is not set.
• Ensure that any volume control in your audio software is set to an audible level.
Configuring Peripherals Interfaces 3
Note that peripheral devices such as serial port A can be disabled during the BIOS
Setup. If the peripheral interface you want to use does not appear to be working with
your peripheral device, ensure that it is enabled in the BIOS. Contact your local help
desk or reseller if you need assistance using BIOS Setup.