Typewriter User Manual

TeamPoS 3000 XL and XL
2
Dimensions
D900000145 Issue 3 3-2
3.1.1 Model D22 & D25 LCD in Dual Stacked Configuration
Note: Dimensions shown with D25 monitor facing straight forward. The 15” LCD
overhangs the right edge of the controller by 5”. In this position the widest
point is 22 3/4”. A D22 monitor used as a customer display and is mounted on
a dual display stand with arms that rotate. Both monitors also rotate and tilt.
With the stand rotated to its maximum width and with the monitors at maximum
rotation and tilt, the maximum width for this configuration is 27 1/8” and
maximum depth is 27”. The printer overhangs the rear edge by 3/4 inch.
3.1.2 Model D25 & D25IR LCD in Dual Stacked Configuration
450
17 ¾”
450
17 3/4”
height
490
19”
footprint
503
19 ¾” to end of printer
450
17 3/4”
450
17 ¾”
height
490
19”
503
19 3/4 to end of printer
602
(23.7”) to back edge of
LCD
578 to 681
22 3/4” to 27” for the
end of LCD overhang
578 to 681
22 ¾” to 27” to
the end of
LCD overhang
685
27” maximum depth
with monitors fully
tilted out.
762
30” maximum depth
with monitors fully
tilted out.