Typewriter User Manual

TeamPoS 3000 XL and XL
2
Installation
D900000145 Issue 3 5-36
11. Connect the wide ribbon cable on the COM board to the ribbon socket on the Combo
board
12. Flip combo board and attach it to the top opening of the chassis of the backplane
assembly by sliding it down into the notches on the chassis. Secure board with the 2
mounting screws.
13. Make sure that the cables do not interfere with the motherboard. Bend and fold the
ribbon cables as needed to clear the motherboard.
Ribbon Cable for
Com Board
Connects to
Combo Board
Mounting
Screws