Datasheet

59
58
More convenient
maintenance
To facilitate the maintenance of the units as
much as possible, the structure of the base
has been divided into two pieces (front and
rear). In addition, the position of the fan has
also been developed in 2 pieces (one higher
and one lower).
Outside electrical heater
The electronics board of these units allows external
heater to be connected (optional) to operate in heating
mode while the defrosting takes place.
Standard inlet and filters
The Fujitsu ducted models are equipped with standard return
filters and a rectangular inlet (except high-pressure models).
The circular inlet is optional.
Conventional model
Lower panel: 1 unit
New model
1 Control
panel.
2 Fan cover.
3 Fan.
4 Motor.
Lower panel: 2 units
Ultra compact units
These low-profile models (21.7 cm in models of up to
5,400 W and 27 cm in models of up to 14,000 W) are also
extremely compact as the junction box is built into the
side of the unit.
Regulation of static pressure
Thanks to its static pressure adjustment function, normal-aver-
age or lower static pressure can be chosen during installation,
via the selector that is on the electrical panel.
1. Low static pressure level, mode 1 to 70 Pa (fan speed: high).
2. Medium static pressure level, air flow at 100 Pa (fan speed:
high).
Air volume (m3/h.)
Static pressure (PA)
Commercial range technology
Duct Type.
Optimum performance guaranteed
DC inverter, the smartest technology
Equipped with the DC inverter advanced technology, the new Fujitsu models provide extraordinary performance
and ensure large savings in energy with regard to conventional models.
Everything within arm's reach
These models incorporate a new remote control with thermo sensor, which allows the tem-
perature to be read from the control in an accurate manner. The use of the remote sensor
makes it possible to control two areas of the house (day and night) with a single controller.
058-059-06 2/05/06 09:12 Página 2
index