Laptop User Manual

C122-E003-02EN 8-229
GSWB
8.3 Operation Commands
• % Invalid input detected at '^' marker.
Cause: Invalid character detected at '^' marker in the entered command string
Action: Enter the command string correctly.
• System error.
Cause: An internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again,
collect unit information, configuration definition information, and the
information in different types of logs, and restart the unit. Alternatively,
contact a certified service engineer.
8.3.6.4 clear bridge
This command deletes the learning table contents.
Only dynamic entries can be deleted; static entries cannot be deleted. To register or
delete static entries, execute the mac address-table static command.
When this command has been entered, it cannot be interrupted by the [Ctrl]+[C] keys.
The command cannot be executed during execution of any of the following
commands:
z show bridge
z This command
Any change in the learning contents by hardware is reflected in the learning table
contents after about 5 to 10 seconds.
(1) Synopsis
(2) Options
None
(3) Command mode
enabled exec
clear bridge