Laptop User Manual

C122-E003-02EN 8-297
GSWB
8.3 Operation Commands
(5) Examples
• Displays information on multicast router ports of all VLANs
• Displays information on multicast router ports of the specified VLAN
(6) Error Messages
• % Incomplete command.
Cause: Incomplete command input
Action: Enter the command string correctly.
• % Invalid input detected at '^' marker.
Cause: Invalid character detected at '^' marker in the entered command string
Action: Enter the command string correctly.
• System error.
Cause: An internal error occurred.
Action: Check the system status, and reenter the command. If the error occurs again,
collect unit information, configuration definition information, and the
information in different types of logs, and restart the unit. Alternatively,
contact a certified service engineer.
Switch# show igmp snooping mrouter
Vlan Ports
----- -----------------------------------------
1 18 GigabitEthernet 0/2(static)
1 19 GigabitEthernet 0/3(dynamic)
2 20 GigabitEthernet 0/4(static)
2 21 GigabitEthernet 0/5(dynamic)
Switch#
Switch# show ip igmp snooping mrouter vlan 1
Vlan Ports
----- ------------------------------------------
1 18 GigabitEthernet 0/2(static)
1 19 GigabitEthernet 0/3(dynamic)
Switch#