Datasheet

Intel® Active Management Technolog
y English - 5
Function overview
Some of the functions must be configured before use.
Setup and Configuration
Installation and initialisation of the iAMT client, to allow iAMT functions to be performed.
Real time invento ry
The basic hardware inventory data is available in va rious system states. This includes information
relating to the main board, processor, memo ry and installed hard disks and optical drives.
Event log
System monitoring is evaluated regardless of the status on the iAMT client. Where required,
pre-configured alarms are sent in a standard way to a suitably configured administrator console.
Serial over LAN
In order to change BIOS settings, an administrator console can take over the screen and keyboard
of the iAMT client during the boot-up proce ss (ANSI terminal, text mode only).
The BIOS input mask can be disabled for local users during remote access maintenance.
KVM ( Keyb oard , Video, Mouse)
KVM allows remote access to the c ompu ter via mouse and keyboard including during the
boot process, even if the system is in an undefined state. The screen content of the remotely
controlled computer is displayed. In this way it is even possible to install the operating system
remotely. N o additional soft ware is needed on the client. KVM requires an active, integrated
graphics and vPro
TM
system which meets the vPro
TM
requirements.
Remote alarm c l ock
This function allows a computer to be woken up at a predetermined time. Since the PC is
the active element, this function can also be a ccesse d from outside a corporate network
(from a home workstation, for example). The function can be programmed centrally via the
management software, provided the management software supports this function.
Fujitsu Technology Solutions 19