user manual

5-11
5.2 Troubleshooting
5
SOLVING COMMON PROBLEMS
NO
YES
YES
NO
NO
Are the documents loaded properly
on the hopper?
Is the upper transport unit closed
correctly?
Load the documents centered
in the hopper.
Close the upper transport unit
correctly.
Is the interface cable connected
properly?
Connect the interface cable
properly.
Symtom3
Scanning does not start.
YES
Is the SCSI ID set correctly?
YES
Continued on next page
Set the SCSI ID correctly
from the operator panel of the
scanner. (* 1)
NO