Operation Manual
Table Of Contents
- B19-7 LED
- Contents
- Your LCD screen...
- Important notes
- Getting started
- Operation
- Switching the device on and off
- Notes on power management
- Changing the monitor settings
- Changing the monitor settings with the buttons of the control panel
- Changing the monitor settings using the OSD menu
- Enable OSD menu
- Selecting sub-menus of the the OSD menu
- Changing settings
- OSD menu functions
- Adjusting the brightness and contrast
- Adjusting the picture size and position
- Adjusting the volume
- Setting colour temperature and colours
- Adjusting the display of the OSD menu
- Setting functions in the Advanced menu
- Displaying information
- Notes on ergonomic colour adjustment
- Troubleshooting
- Explanatory information about standard ISO 9241-307
- Technical specification
![](/manual/fujitsu/b19-7-led/operation-manual-english/images/img-14.png)
Getting started
1
► Position the keyboard where it is
easiest to reach (1).
1
50 cm
► Position the monitor so that the eye distance
to the screen (1) is a round 50 cm.
► Position the monitor for optimum viewing
(1). The m onitor should und er no
circumstances fall outside the permissible
viewing space (2).
Depending on t he situation, it may be advisable to use a swivel arm or similar
accessory (VESA FPMPMI), which are available from specialist dealers. For
this purpose the monitor base must be removed b eforeh and as described
in Chapter "
Removing monitor base", Page 16.
Fujitsu 13