Operation Manual

Operation
Changing the monitor settings with the buttons
of the control panel
With the OSD menu not activated, you can make the following settings directly.
Call up OSD menu
Activate/deactivate ECO operating m ode
Select input signal (digital/analog)
Adjust volume
Adjust brightness
Perform au to-adjustment of the monitor with analog input
ON/OFF switch with power indicator
Select OSD language
After the first switch on and after the mon itor has be en re set to the factory s ettings,
the selection screen for the language appears:
► Press the
ECO
/ button or the
INPUT
/ button to select the desired language.
► Press the
MENU
/ button to confirm or the
AUTO
/ button to cancel.
After selecting the O SD language for the first time, you can change
it at any time in the OSD.
Activate/deactivate ECO operating m ode
The power consumption of the device can be decreased by reducing
the brightness of the picture.
► Press the
ECO
button to switch the ECO operating mod e on or off.

The mes
sage ECO Mode on or ECO Mode off is displayed.
If the ECO operating mode is activated, the following O SD settings are changed:
Colour
6,500 K
Brightness
reduced
After the ECO operating mode is switched off, the brightness previously set by the user is restored.
22 Fujitsu