Operation Manual
Table Of Contents
- B19-7 LED
- Contents
- Your LCD screen...
- Important notes
- Getting started
- Operation
- Switching the device on and off
- Notes on power management
- Changing the monitor settings
- Changing the monitor settings with the buttons of the control panel
- Changing the monitor settings using the OSD menu
- Enable OSD menu
- Selecting sub-menus of the the OSD menu
- Changing settings
- OSD menu functions
- Adjusting the brightness and contrast
- Adjusting the picture size and position
- Adjusting the volume
- Setting colour temperature and colours
- Adjusting the display of the OSD menu
- Setting functions in the Advanced menu
- Displaying information
- Notes on ergonomic colour adjustment
- Troubleshooting
- Explanatory information about standard ISO 9241-307
- Technical specification
Operation
Select input signal (D-SUB/DVI-D)
► Press the
INPUT
button to call the Input select setup window.
► Press the
/ button or the / button to select the desired
monitor connection (VG A or DVI).
► Press the
MENU
/ buttontoconfirm or the
AUTO
/ button to cancel.
This setting window can also be called when the OSD menu is locked .
Performing auto-adjustment of the m onitor
This setting is only p
ossible with an analog VGA input.
► Press the
AUTO
button for about 1 second.
The Auto Processing message appears.
Picture quality and position are set to optimum values for your system.
Locking the ON/OFF button
The ON/OFF switch can be locked to prevent accidental or unauthorised
changes to the monitor settings.
► Press the
ECO
button and the
INPUT
button at the same time and
keep them pres sed for a few seconds.
The message Power button loc ked / unlocked is displayed.
Proceed in the same way to release the locked ON/OFF switch again.
Locking the OSD menu
The OSD menu can be locked to prevent accidental or unauthorised changes to the monitor settings.
► Press and ho ld the
MENU
button and the ON/OFF switch simultaneously for several seconds.
The m e ssage OSD locked and a progress bar appear.
► To activate the lock function, keep both buttons pressed until th e progress bar is f ully loaded.
The OSD menu is locked.
Please proceed in the same manner to release the locked OSD menu again.
Fujitsu 23