Operation Manual

Operation
Adjusting the brightness and contrast
Call up the Brightness/Contrast setting window
Brightness
Set the brightness of the display
With this function you chang e th e b rightness of the background lighting.
Contrast
Set the contrast of the display
With this function you mod ify the contrast of bright colour tones.
Black level
Set the brightness of the display
With this function you modify the contrast of dark colour tones.
Auto level
Adjust the signal level
With this function you can automatically set the contrast.
Thefunctionisexecutedwiththe
button.
If the con trast is set too high, bright surfaces can no longer be distinguished from very
bright surfaces. If the contrast is set too low, the maximu m brightness will not be achieved.
Adjusting the picture size and position
These settings are only possible if the PC is connected analog via VG A.
Call the Image
adjust setting window
Phase
Eliminate picture disturbance
With this function you fine-tune your monitor to eliminate picture disturbance.
Clock
Set synchro
nisation
With this f
unction you adjust the picture w idth to eliminate vertical picture
disturban
ces.
H-Positi
on
Adjust th
e horizontal position
With this
function you m ove the picture to the left or to the right.
V-Posit
ion
Adjust t
he vertical position
With th
is funct ion you move the picture up or down.
Expans
ion
Adjus
t the picture size
Full s
creen = selection o f full screen mode
Keep
aspect = maximum picture size without distortion
26 Fujitsu