Operation Manual
Table Of Contents
- B19-7 LED
- Contents
- Your LCD screen...
- Important notes
- Getting started
- Operation
- Switching the device on and off
- Notes on power management
- Changing the monitor settings
- Changing the monitor settings with the buttons of the control panel
- Changing the monitor settings using the OSD menu
- Enable OSD menu
- Selecting sub-menus of the the OSD menu
- Changing settings
- OSD menu functions
- Adjusting the brightness and contrast
- Adjusting the picture size and position
- Adjusting the volume
- Setting colour temperature and colours
- Adjusting the display of the OSD menu
- Setting functions in the Advanced menu
- Displaying information
- Notes on ergonomic colour adjustment
- Troubleshooting
- Explanatory information about standard ISO 9241-307
- Technical specification
Notes on ergonomic colour adjustmen
t
Notes on ergonomic colour adju
stment
If you select colours for the monitor in your application programmes,
take note of the information below.
The primary colours blue and red on a dark background do not produce the minimum
required contrast of 3:1 and are therefore not suitable for continuous t ext and data entry.
When using several colours for characters and background and giving the primary colours full
modulation, you can obtain very suitable colour combinations (see the following table):
Characters
Background
black white purple blue
cyan green
yellow red
black
++
-
+++
-
white
+++
---
+
purple
++
-----
blue
-
+
-
+
-
+
-
cyan
+
--
+
---
green
+
--
+
---
yellow
+
-
++
--
+
red
-
+
----
+
+ Colour combination v ery suitable
- Colour combination not suitable because colour hues are too close together, thin characters
are n ot identifiable or rigorous focusing is demanded of the human eye.
Fujitsu 29