Operation Manual
Table Of Contents
- B19-7 LED
- Contents
- Your LCD screen...
- Important notes
- Getting started
- Operation
- Switching the device on and off
- Notes on power management
- Changing the monitor settings
- Changing the monitor settings with the buttons of the control panel
- Changing the monitor settings using the OSD menu
- Enable OSD menu
- Selecting sub-menus of the the OSD menu
- Changing settings
- OSD menu functions
- Adjusting the brightness and contrast
- Adjusting the picture size and position
- Adjusting the volume
- Setting colour temperature and colours
- Adjusting the display of the OSD menu
- Setting functions in the Advanced menu
- Displaying information
- Notes on ergonomic colour adjustment
- Troubleshooting
- Explanatory information about standard ISO 9241-307
- Technical specification
Technical specification
Technical specification
Condensation is not permitted, neither in the rated range of operation
nor in the limit range of operation.
Product name B19-7 LED
Model name DY19-7
Dimensions and weight
Visible diagonals 48 cm
Dot pitch 0.098 mm
Width 378.8 mmImage size
Height 303.0 mm
Maximum resolution 1280 x 1024
Width 414 mm
Height 370 mm
Dimensions incl. monitor base
Depth 209 mm
Weight (without packaging)
approx. 5.2 kg
Storable d
isplay modes
20
Pixel err
or classes acco rdi ng
to ISO 924
1-307
Class
II
Electri
cal data
Analog
Positive, 0.7 V
pp
,75Ω
Video
Digital
DVI-D with HDCP
Synch
ronisation
Separ
ate Sync. TTL,
posi
tive or negative
Horizontal frequency
30 k
Hz .... 82 k H z
(mu
lti-scanning)
Refresh rate
56
Hz .... 76 Hz
Maximum pixel rate 165 MHz
Power supply
Switches automatically
100 V – 240 V, 50/60 Hz
Normal operation 17 W
ECO operating mode
15 W
Typical power consumption
(without audio)
Power saving mode 0.22 W
Sound output 1.5 W left; 1.5 W right
Fujitsu 33