Operation Manual
Table Of Contents
- B19-7 LED
- Contents
- Your LCD screen...
- Important notes
- Getting started
- Operation
- Switching the device on and off
- Notes on power management
- Changing the monitor settings
- Changing the monitor settings with the buttons of the control panel
- Changing the monitor settings using the OSD menu
- Enable OSD menu
- Selecting sub-menus of the the OSD menu
- Changing settings
- OSD menu functions
- Adjusting the brightness and contrast
- Adjusting the picture size and position
- Adjusting the volume
- Setting colour temperature and colours
- Adjusting the display of the OSD menu
- Setting functions in the Advanced menu
- Displaying information
- Notes on ergonomic colour adjustment
- Troubleshooting
- Explanatory information about standard ISO 9241-307
- Technical specification
Your LCD screen...
Your LCD screen...
has a whole range of useful features and functions, e.g.:
• TFT display (Thin Film Transistor; active ma trix)
• minimal space requirement
s thanks to slim casing
• LED background lighting
• optimum ergonomic chara
cteristics (totally distortion-free, excellent picture
definition and colour pu
rity right into the corners)
• landscape and po rtrait mode
• high degree of brightn
ess and good contrast
• high resolution (1280 x 1024)
• presentation of u p to
16.7 million colours (in conjunction with an appropriate display adapter)
• automatic scanning of horizontal frequen cies from 30 to 82 kHz and refresh rates
(vertical frequencies) from 56 to 76 Hz (absolutely flicker-free)
• digital screen con
troller with micropro cessor for storing 20 different display modes
• freely adjustable colour alignment for matching the screen colours to the
colours of various input and output devices
• convenient oper
ation v ia integrated OSD (On-Screen-display) menu
• VESA-DDC compatibility
• VESA-FPMPMI co
mpatibility (Flat Panel Monitor Physical Mounting Interface) –
Mounting devi
ce for swivel arm or a similar accessory
• Plug&Play capability
• ECO function
• Digital Video Input (DVI) with HDCP
• power manag
ement for reducing powe r consumption when the computer is not in use
• compliance with the recommendations according to TCO 6.0
• the monito
rfulfills all GS ("Geprüfte Sicherheit", Certified Security) requirements.
This operating manual contains important information you require to start up and run your LCD monitor.
A display adapter (screen controller) with VG A interface or a digital display adapter with
DVI interface is required to control the LCD monitor. The monitor processes the data
supplied to it by the display adapter. The display adapter or the associated driver software
is responsible for setting the modes (resolution and refresh rate).
When putting the monitor into o peration for the first time, the screen display should be
optimally adapted to the display adapter used and adjusted in acco rdance w ith y our
needs (see chapter "
Changing the monitor settings", Page 21).
Target group
You d
on’t need to be an "expert" to perform the operations described here.
Non
etheless, it is important to always observe the safety notes given in the operating
ins
tructions for the computer and in this manual.
In t
he event of any problems, please contact your sales office or our Service Desk.
Fujitsu 5