Display Betriebsanleitung B19-7 LED
Wir gratulieren Ihnen zum Kauf eines innovativen Produkts von Fujitsu. Aktuelle Informationen zu unseren Produkten, Tipps, Updates usw. finden Sie im Internet: "http://www.fujitsu.com/fts/" Treiber-Updates finden Sie unter: "http://support.ts.fujitsu.com/download" Wenn Sie technische Fragen haben sollten, wenden Sie sich bitte an: • unsere Hotline/Service Desk (siehe Service-Desk-Liste oder im Internet: "http://support.ts.fujitsu.
Herausgegeben von / Kontaktadresse in der EU Fujitsu Technology Solutions GmbH Mies-van-der-Rohe-Straße 8 80807 München, Germany "http://www.fujitsu.com/fts/" Copyright © Fujitsu Technology Solutions GmbH 2013. Alle Rechte vorbehalten. Ausgabedatum 06/2013 Bestell-Nr.
B19-7 LED Betriebsanleitung Ihr LCD-Bildschirm ...
Bemerkung Hinweise zur Produktbeschreibung entsprechen den Designvorgaben von Fujitsu und werden zu Vergleichszwecken zur Verfügung gestellt. Die tatsächlichen Ergebnisse können aufgrund mehrerer Faktoren abweichen. Änderungen an technischen Daten ohne Ankündigung vorbehalten. Fujitsu weist jegliche Verantwortung bezüglich technischer oder redaktioneller Fehler bzw. Auslassungen von sich.
Inhalt Inhalt Ihr LCD-Bildschirm ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Zielgruppe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Weitere Informationen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Inhalt 4 Fujitsu
Ihr LCD-Bildschirm ... Ihr LCD-Bildschirm ... verfügt über zahlreiche nützliche Eigenschaften und Funktionen, z. B.: • • • • TFT-Display (Thin Film Transistor, Aktiv-Matrix) geringer Platzbedarf wegen geringer Gehäusetiefe LED-Hintergrundbeleuchtung optimale ergonomische Eigenschaften (absolute Verzerrungsfreiheit, exzellente Schärfe und Farbreinheit bis in die Ecken) • Breitbild- und Hochformat • hohe Helligkeit und guter Kontrast • hohe Auflösung (1280 x 1024) • Darstellung von bis zu 16,7 Mio.
Ihr LCD-Bildschirm ... Weitere Informationen Wie Sie Auflösungen und Bildwiederholfrequenzen einstellen, entnehmen Sie den Dokumentationen Ihrer Grafikkarte und der dazugehörigen Treiber-Software. Aus ergonomischen Gründen empfehlen wir eine Bildschirmauflösung von 1280 x 1024 Punkten. Technologiebedingt (Aktiv-Matrix) bietet ein LCD-Bildschirm auch bei einer Bildwiederholfrequenz von 60 Hz ein absolut flimmerfreies Bild.
Wichtige Hinweise Wichtige Hinweise Wichtige Hinweise Hinweise In diesem Kapitel finden Sie unter anderem Sicherheitshinweise, die Sie beim Umgang mit Ihrem Gerät unbedingt beachten müssen. Sicherheitshinweise Dieses Gerät entspricht den einschlägigen Sicherheitsbestimmungen für Einrichtungen der Informationstechnik, einschließlich elektrischer Büromaschinen für den Einsatz in Büroumgebung.
Wichtige Hinweise • • • • • • • • • • Stellen Sie nur die Bildschirmauflösungen und Bildwiederholfrequenzen ein, die im Kapitel "Technische Daten", Seite 33 angegeben sind. Wenn Sie andere Werte einstellen, kann das Gerät beschädigt werden. Wenden Sie sich im Zweifelsfall an Ihre Verkaufsstelle oder an unseren Service Desk. Setzen Sie einen Bildschirmschoner mit bewegten Bildern ein und aktivieren Sie das Power-Management für Ihren Bildschirm, um ein "Einbrennen" von Standbildern zu vermeiden.
Wichtige Hinweise Gerät transportieren Wiedertransport Transport Gerät Transportieren Sie alle Geräte einzeln und nur in ihrer Originalverpackung oder in einer anderen geeigneten Verpackung, die Schutz gegen Stoß und Schlag gewährt. Packen Sie die Geräte erst am Aufstellungsort aus. Wenn das Gerät aus kalter Umgebung in den Betriebsraum gebracht wird, kann sich Kondenswasser bilden. Warten Sie, bis das Gerät temperaturangeglichen und absolut trocken ist, bevor Sie es in Betrieb nehmen.
Wichtige Hinweise Entsorgung und Recycling Dieses Gerät wurde weitestgehend aus Materialien hergestellt, die umweltschonend entsorgt und einem fachgerechten Recycling zugeführt werden können. Nach seinem Gebrauch wird das Gerät zurückgenommen, um es einer Wiederverwendung oder wertstofflichen Verwertung zuzuführen, soweit es in einem Zustand zurückgegeben wird, der dem bestimmungsgemäßen Gebrauch entspricht. Nicht verwertbare Geräteteile werden sachgemäß entsorgt.
Inbetriebnahme Inbetriebnahme Lieferinhalt auspacken und überprüfen Die Display-Oberfläche des Gerätes ist druck- und kratzempfindlich. Fassen Sie das Gerät deshalb nur am Gehäuse an. Zur vollständigen Lieferung des Geräts gehören: • • • • • • • • • ein Bildschirm eine Datenleitung (DVI) eine Datenleitung (VGA) eine Audioleitung eine Netzleitung eine CD mit Software und Dokumentation ein Garantieheft ein Flyer "Quick Start Guide" ein Handbuch "Sicherheit/Regularien" ► ► ► ► Packen Sie alle Teile aus.
Inbetriebnahme Gerät aufstellen Halten Sie Zuluft- und Abluftöffnungen des Geräts frei, um eine ausreichende Belüftung zu gewährleisten. Einrichten eines ergonomischen Bildschirmarbeitsplatzes ► Stellen Sie den Bildschirmarbeitsplatz nicht gegenüber einem Fenster (1) auf. 1 1 12 ► Stellen Sie den Bildschirm außerhalb der Reichweite einer Lichtquelle (1) auf.
Inbetriebnahme ► Platzieren Sie die Tastatur im optimalen Greifbereich (1). 1 ► Platzieren Sie den Bildschirm so, dass der Augenabstand zum Bildschirm (1) etwa 50 cm beträgt. 1 50 cm ► Platzieren Sie den Bildschirm im bevorzugten Sehraum (1). Der Bildschirm sollte aus dem zulässigen Sehraum (2) auf keinen Fall herausragen. Je nach Situation kann sich die Verwendung eines Schwenkarms oder eines vergleichbaren Zubehörs (VESA FPMPMI) anbieten, die im Fachhandel erhältlich sind.
Inbetriebnahme Bildschirmfuß montieren Entfernen Sie den Sicherungs-Splint nicht bevor Sie die Bodenplatte am Monitor befestigt, und ihn in der Betriebsposition aufgestellt haben. ► Setzen Sie die Bodenplatte am Standfuß ein (1). ► Führen Sie die Schraube durch die Öffnung (2). ► Befestigen Sie die Bodenplatte mit der Schraube (3). ► Stellen Sie den Bildschirm in Betriebspositon auf.
Inbetriebnahme Höhe einstellen Die Höhenverstellung ist in der Transportposition fixiert. ► Um die Fixierung zu lösen, entfernen Sie den Sicherungsstift am Ring (1). Der Bildschirm kann im Bereich von etwa 130 mm in seiner Höhe verstellt werden. ► Fassen Sie den Bildschirm mit beiden Händen am rechten und linken Gehäuserand und bewegen Sie ihn auf- oder abwärts (2).
Inbetriebnahme Hochformat einstellen Der Bildschirm kann aus der Position Breitformat (Landscape-Modus) in die Position Hochformat (Portrait-Modus) gedreht werden. ► Fassen Sie den Bildschirm mit beiden Händen am rechten und linken Gehäuserand, neigen Sie den Bildschirm nach hinten, bewegen Sie ihn in die höchste Position und drehen Sie ihn im Uhrzeigersinn bis in die Hochformatposition.
Inbetriebnahme Anschließen des Geräts Beachten Sie die Sicherheitshinweise im Kapitel "Wichtige Hinweise", Seite 7. CE-Konformität sowie eine optimale Bildqualität werden nur mit den mitgelieferten Datenleitungen gewährleistet. ► Schalten Sie den Bildschirm und den Computer aus. ► Lösen Sie den Netzstecker des Computers.
Inbetriebnahme ► Stecken Sie einen Stecker der Datenleitung an die D-SUB- oder die DVI-D-Anschlussbuchse des Bildschirms und sichern Sie die Steckverbindung durch Anziehen der Sicherungsschrauben. Der Bildschirm erkennt den Eingang automatisch, wenn nur eine Signalquelle angeschlossen ist. ► Stecken Sie einen Stecker der Audioleitung in die Buchse AUDIO IN am Bildschirm und achten Sie auf sicheres Einrasten. ► Stecken Sie die mitgelieferte Netzleitung in die Netzanschlussbuchse des Bildschirms.
Bedienung Bedienung Gerät ein-/ausschalten 1 1 1 = Ein-/Ausschalter 2 2 2 = Netzanzeige Die Farbe der Netzanzeige verändert sich folgendermaßen: Netzanzeige blau grün orange leuchtet nicht Status Bildschirm und Computer sind eingeschaltet (Normal Mode). Bildschirm und Computer sind eingeschaltet (ECO Mode). Bildschirm erhält kein Videosignal oder befindet sich im Energiesparmodus. Bildschirm ist ausgeschaltet. ► Schalten Sie das Gerät mit dem Ein-/Ausschalter (1) ein.
Bedienung Hinweise zum Power-Management Wenn Ihr Computer mit einem Power-Management (Energiesparmodus) ausgestattet ist, kann Ihr Bildschirm diese Funktion voll unterstützen. Der Bildschirm unterscheidet dabei nicht zwischen den einzelnen Energiesparmodi des Computers (Standby-Modus, Suspend-Modus und OFF-Modus), da er in der Lage ist, sofort in den Modus mit dem höchsten Energiespareffekt zu schalten.
Bedienung Bildschirmeinstellungen ändern Wenn Sie den Bildschirm das erste Mal in Betrieb nehmen, sollten Sie die Bildschirmanzeige optimal an die verwendete Grafikkarte anpassen. Die Tasten des Bedienfelds sind doppelt belegt. Bei aktiviertem OSD-Menü (On-Screen Display) wird die aktuelle Bedeutung der Tasten am Bildschirmrand direkt über den Tasten angezeigt. Je nach gewähltem Untermenü variiert die Anzeige über den Tasten.
Bedienung Bildschirmeinstellungen mit den Tasten des Bedienfelds ändern Bei nicht aktiviertem OSD-Menü können Sie folgende Einstellungen vornehmen.
Bedienung ECO-Betriebsart aktivieren/deaktivieren Durch Reduzierung der Bildhelligkeit kann die Leistungsaufnahme des Geräts reduziert werden. ► Drücken Sie die Taste ECO , um die ECO-Betriebsart aus- oder einzuschalten. Die Meldung ECO Mode on bzw. ECO Mode off erscheint.
Bedienung Ein-/Ausschalter sperren Der Ein-/Ausschalter kann gesperrt werden, um unbeabsichtigte oder unbefugte Veränderungen an der Bildschirmeinstellung zu verhindern. ► Halten Sie die Taste ECO und die Taste INPUT gleichzeitig einige Sekunden gedrückt. Die Meldung Power button locked / unlocked erscheint.
Bedienung Untermenüs des OSD-Menüs wählen ► Drücken Sie die Taste ECO / oder die Taste INPUT / Untermenü zu markieren (z. B. Image adjust). , um ein anderes , um das markierte Untermenü auszuwählen. ► Drücken Sie die Taste MENU / Das Einstellfenster wird angezeigt (z. B Image adjust ). Hier können weitere Einstellungen vorgenommen werden. ► Um ins Hauptmenü zurückzukehren, drücken Sie die Taste AUTO / .
Bedienung Helligkeit und Kontrast einstellen Einstellfenster Brightness/Contrast aufrufen Brightness Helligkeit der Anzeige einstellen Contrast Mit dieser Funktion verändern Sie die Helligkeit der Hintergrundbeleuchtung. Kontrast der Anzeige einstellen Black level Mit dieser Funktion verändern Sie den Kontrast von hellen Farbtönen. Helligkeit der Anzeige einstellen Mit dieser Funktion verändern Sie den Kontrast von dunklen Farbtönen.
Bedienung Lautstärke einstellen Einstellfenster Audio aufrufen Volume Mute Lautstärke für die Wiedergabe über die eingebauten Lautsprecher einstellen Lautsprecher aus- oder einschalten Farbtemperatur und Farben einstellen Einstellfenster Colour aufrufen Farbtemperatur auswählen Mit Hilfe der Farbtemperatur wird die "Wärme" der Bildschirmfarben eingestellt. Die Farbtemperatur wird in K (= Kelvin) gemessen.
Bedienung Funktionen im Menü Advanced einstellen Einstellfenster Advanced aufrufen Input select Eingangssignal auswählen Mit dieser Funktion schalten Sie den Bildschirm vom analogen in den digitalen Betrieb und umgekehrt, wenn mehrere Signalquellen angeschlossen sind. DDC-CI Voraussetzung ist, dass die verwendete Grafikkarte diesen Betrieb unterstützt.
Hinweise zur ergonomischen Farbeinstellung Hinweise zur ergonomischen Farbeinstellung Wenn Sie in Ihren Anwendungsprogrammen Farben für den Bildschirm einstellen, sollten Sie folgende Hinweise beachten. Die Grundfarben Blau und Rot auf dunklem Hintergrund erreichen nicht den Mindestkontrast von 3:1 und sind deshalb für dauernde Text- und Dateneingabe nicht geeignet.
Fehlerbehebung Fehlerbehebung Bei Auftreten eines Fehlers prüfen Sie zunächst die im Folgenden genannten Punkte. Falls das Fehlerbild dadurch nicht beseitigt wurde, sollte der Bildschirm nach Möglichkeit an einem anderen Computer geprüft werden. Wenn Sie das Problem nicht lösen können, verständigen Sie bitte unseren Service Desk.
Fehlerbehebung Haben Sie dieses Problem? Bild zittert Bild verstellt Bildstörungen (vertikale Streifen) Bildstörungen (horizontale Streifen, Grießeln) Bildschirmanzeige wird dunkler Überprüfen Sie die genannten Punkte: ► Prüfen Sie, ob die Datenleitung des Bildschirms fest mit dem Bildschirmanschluss des Computers verschraubt ist. ► Drücken Sie die Taste AUTO um die Selbstjustage des Bildschirms durchzuführen. ► Führen Sie die Funktion Factory Recall im OSD Menü aus.
Erläuterungen zur Norm ISO 9241–307 Erläuterungen zur Norm ISO 9241–307 Helle oder dunkle Bildpunkte Nach dem heutigen Stand der Produktionstechnik kann eine absolut fehlerfreie Bildschirmanzeige nicht garantiert werden. Es können abhängig von der Gesamtanzahl der Pixel (Auflösung) einige wenige konstant helle oder dunkle Pixel (Bildelemente) oder Subpixel (Bildpunkte) vorhanden sein. Pixel (= Bildelement) Subpixel (= Bildpunkt) Ein Pixel besteht aus 3 Subpixeln, in der Regel Rot, Grün und Blau.
Technische Daten Technische Daten Betauung ist weder im Nennbetriebs- noch im Grenzbetriebsbereich zulässig. Produktname Modellname Abmessungen und Gewicht Sichtbare Diagonale Punktabstand Bildgröße Maximale Auflösung Abmessungen inkl. Bildschirmfuß B19-7 LED DY19-7 48 cm 0,098 mm 378,8 mm 303,0 mm 1280 x 1024 414 mm 370 mm 209 mm ca.
Technische Daten VESA-DDC-kompatible VGA-Schnittstelle Der Bildschirm ist mit einer VESA-DDC-kompatiblen VGA-Schnittstelle ausgestattet. VESA-DDC (Video Electronics Standard Association, Display Data Channel) dient als Kommunikationsschnittstelle zwischen Bildschirm und Computer. Wenn der Computer mit einer VESA-DDC-kompatiblen VGA-Schnittstelle ausgerüstet ist, dann kann er automatisch die Daten für den optimalen Betrieb aus dem Bildschirm auslesen und die entsprechenden Einstellungen vornehmen.
Technische Daten Anschluss D-SUB 5 1 10 6 15 Stift 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Fujitsu 11 Bedeutung Videoeingang Rot Videoeingang Grün Videoeingang Blau Masse Masse Video Masse Rot Video Masse Grün Video Masse Blau +5 V (DDC) Masse Sync. Masse DDC-Daten H-Sync. V-Sync.
Technische Daten Anschluss DVI-D 1 9 17 Stift 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 36 Bedeutung TMDS Data2– TMDS Data2+ TMDS Data 2/4 Shield Not connected Not connected DDC Clock DDC Data Analogue Vertical Sync TMDS Data1– TMDS Data1+ TMDS Data 1/3 Shield Not connected Not connected +5V Power Ground Hot Plug Detect TMDS Data0– TMDS Data0+ TMDS Data 0/5 Shield Not connected Not connected TMDS Clock Shield TMDS Clock+ TMDS Clock– Fujitsu